PRE-ORDER - Expected to ship in June!

We believe that when it comes to the newer crossover SUV options on the market today, the 2017+ CX5 is the cream of the crop. The beautiful lines paired with Mazda’s attention to detail really make this vehicle shine. The 2.5-liter turbocharged version also provides you with a car that is as enjoyable to drive as it is beautiful. We believe that a car that looks good should sound good as well. Our mandrel-bent, 80mm polished stainless steel axle-back exhaust system will ensure you are seen AND heard. The dual 160mm resonators deliver a throatier exhaust note without drone or excessive noise.

Performance Sound:

The CorkSport 80mm axle back exhaust delivers some much needed volume to the exhaust note of the SkyActiv 2.5T. By replacing the large OEM muffler section with high flow, pass through resonators, you get a performance sound that is quiet under normal driving but wakes up when you get on the throttle. Best of all, the CS axle back is less restrictive than the OEM exhaust, helping your engine breath better. Check out the product video for sound clips!

Stylish Look:

The GEN 2 CX-5 looks great but is let down by the tiny OEM exhaust tips. The CS axle back exhaust uses enlarged 100mm, dual wall exhaust tips to really fill out the bumper cutouts and give you an upgraded, yet subtle look. The tips were also brought outward slightly, to further the visual benefit of the CorkSport axle back. It truly looks like the way it should’ve come from Mazda, but we didn’t, stop there. Finishing off the look are laser engraved CorkSport name badges for a classy aesthetic detail.

Materials & Manufacturing:

As with every CorkSport exhaust, the CX-5 axle back uses fully polished, mandrel bent, 304 stainless steel. These aspects ensure that your exhaust flows well, looks great, and will stand the test of time. Each joint is precision TIG welded, while the inlet flange is laser cut for optimum fitment. We also provide all the hardware and gaskets you need for install, along with full color instructions to ensure waking up your CX-5 is as easy as possible!

Vehicle Fitment: 2017+ Mazda CX5 2.5L and 2.5T
Designed in America: in Vancouver, Washington, in the Pacific Northwest.
CorkSport Service & Support: Receive a 2 year limited warranty, full color installation instructions, all necessary components, and knowledgeable telephone support at (360) 260-2675.
Additional Info:Check out the blog on the Cx5 Axleback.

Axle-back exhaust was developed and tested with the 2.5L Turbocharged models. Sound output for the Non-Turbo Models has not been confirmed.

How To Install Your CX5 Turbo Axle Back Exhaust

It will take you 2 hours to install the Mazda Performance CX5 Axleback Exhaust with our easy-to-use instructions.

2 Hour Install Time

2/5 Difficulty

2-Year Warranty

No CEL

I just bought this item used, for my new to me 2022 CX-5 Turbo.

It's extremely deep. Not very loud. Engine is louder than the exhaust at high RPM's. Atleast in the cab. my custom intake is a lot more noticeable than the exhaust is....

except for cold starts.

HOLY JEEZ! cold starts are something else! it's like 2 12" subwoofers playing at max volume lol! revving it higher than the cold start is actually quieter somehow.

If you park with your exhausts pointing towards a solid object, you will be yelling for the first 10 seconds of your cold start since the bass in the cab of the car will be loud :D

Marc G10/09/2024, 12:20 PM

Just installed mine on 24 CX-5 Turbo Premium. What a difference this has made over factory exhaust. It breaths so much better. I find the turbo spools faster and IMO there is a noticeable performance gain. Great system took 1 hr to install from the moment it was delivered to when I was finished. Took longer to unbox than to install. Packaged so well in order not to get scratched. My local exhaust shop even told me to go with this system over their custom system because they couldn’t come close to that price. I’m so happy I waited for it to come back into stock. Ty.

Chaphole09/24/2024, 05:15 PM

Just installed this a few hours ago. Easy, I used a cardboard box to keep CS exhaust up off graound and in location. Also car on 2.5" tall ramps. Took like 20min to install. I'm a tig welder so I can appreciate the nice lookn welds. Just be careful not to scratch CS exhaust, use some cardboard under car or something soft and leave on that bubble wrap until it's installed.

Mike09/13/2024, 03:26 PM

Not sure how this is only designed for the 17+ is a year from the 16 that much of a difference? Makes no sense. Glad I'm doing my own custom exhaust setup.

Kev08/22/2024, 07:59 PM

There isn't a ton of great videos out there to showcase this exhaust, but rest assured it's an incredibly deep, low rumble at low RPM's. A very "mature" sounding exhaust, not raspy or too loud. Took me a total of 20 minutes to install, 100% would recommend to every CX-5 owner who wants a noticeably louder exhaust but not overdo it.

Troy D.06/14/2024, 11:17 AM

Love the way it changes the characteristics of the car, from casual to zoom zoom. Cold start excitement settles down to a low growl that is not overbearing inside the cab. Looks great, sound great.

Robert Conklin01/01/2023, 06:21 PM

I got this for my 2018 Mazda CX-5 Touring wasn’t sure the outcome for the non turbo model. But let me just say very well worth the money best sounding exhaust I’ve ever had

Curtis Belz03/24/2022, 04:59 AM

Awesome, i get the first review. Top quality, well-packaged for shipping, looks and sounds great! 2021 CX5 turbo.

Sean McCormack09/13/2021, 08:00 AM

Cx5 6 102 10 waitting...

Jonathan02/02/2021, 09:48 AM

Write a review

Does it come with all the required parts for installation?

Asked by Austin Hunter | 05/03/2025, 11:41 AM | 1 answer(s)

Will this fit a 2024 CX5 turbo premium?

Asked by Mark Velasco | 02/14/2024, 02:44 AM | 0 answer(s)

will this fit a 2024 Mazda Cx5?

Asked by Bill | 01/20/2024, 07:36 PM | 1 answer(s)

Hi, I’d like to have the tips on this exhaust be black, any chance to order it that way? Thanks!

Asked by Tony | 08/05/2023, 11:20 PM | 1 answer(s)

Hi! Is the $599 currency in CAD or USD?

Asked by Gem Garces | 06/04/2023, 06:41 PM | 1 answer(s)

Will this fit a 2023 CX-5 Carbon Edition?

Asked by Albert | 05/10/2023, 01:23 PM | 1 answer(s)

Is this "Commiefornia approved", ( CARB compliant )

Asked by Shain Grow | 02/16/2023, 01:55 PM | 1 answer(s)

What are the power gains for the axle back exhaust with a 2022 CX-5 turbo?

Asked by Mitch | 08/25/2022, 08:18 PM | 1 answer(s)

This fit CX5 turbo 2022?

Asked by Sergio Bautista | 08/18/2022, 09:32 PM | 1 answer(s)

Hi - have you confirmed fitment of this on a 2022 CX-5? I believe some minor changes were made to the bumper for this year and want to make sure it will still fit. Thanks!

Asked by Logan | 06/03/2022, 11:27 AM | 1 answer(s)

Will this fit the CX-50 Turbo?

Asked by Stephen | 04/21/2022, 08:48 AM | 1 answer(s)

Will this fit a 2022 CX-5 Carbon Edition?

Asked by Jay S DelGuidice | 04/19/2022, 12:30 PM | 1 answer(s)

Would this fit 2010 cx7

Asked by Mikey | 04/06/2022, 10:03 AM | 1 answer(s)

will this fit the 2021 2.5t AWD cx5?

Asked by alan | 01/25/2022, 04:07 PM | 1 answer(s)

Do you have any video of non-turbo 2.5L CX-5 sound?

Asked by Sinan | 01/20/2022, 02:08 AM | 1 answer(s)

Will this this fit on the skyactive diesel?

Asked by Peter Stasik | 11/20/2021, 07:20 AM | 1 answer(s)

Will this fit on the 2019 CX-5 variant?

Asked by JoshPeterson | 06/02/2021, 09:08 AM | 1 answer(s)

Is preordering available? Is August 18th an estimation or the actual date of availability?

Asked by Braden | 05/25/2021, 03:42 PM | 1 answer(s)

You moved release date on 2021 CX5 AWD TURBO ?

Asked by Scott | 05/16/2021, 07:23 AM | 1 answer(s)

What are the horsepower gains with the exhaust

Asked by Scott Bergman | 05/08/2021, 04:09 PM | 1 answer(s)

Will this void any kind of factory or extended warranty?

Asked by Jesse pertl | 04/23/2021, 08:21 AM | 1 answer(s)

Is this compatible with ‘21 CX-5 GTR w/ Turbo?

Asked by Shaun McClure | 04/06/2021, 09:28 AM | 1 answer(s)

Would this interfere or be compatible with a standard trailer hitch install? CX5 hitch mounting points are right next to OEM exhaust and fit very close together.

Asked by Dan | 04/04/2021, 05:47 PM | 1 answer(s)

Is there any (noticable) weight difference between this and the OEM exhaust?

Asked by lj | 11/22/2020, 11:16 AM | 1 answer(s)

Will the CorkSport 80mm cat-back exhaust fit on a 2014 Mazda CX-5 Grand Touring with the 2.5L engine ? Any complications ?

Asked by Bobby Direckson | 11/01/2020, 10:10 AM | 1 answer(s)

Does this axle back exhaust fit the 2.0 liter NA engine exhaust system?

Asked by Nick Van Goethem | 08/30/2020, 01:31 PM | 1 answer(s)

Will this also fit the non-turbocharged 2.5 CX-5?

Asked by Philip Joly | 06/13/2020, 11:15 AM | 1 answer(s)

Will your CX-5 exhaust fit with the factory hitch installed?

Asked by Jacob Croutcher | 06/05/2020, 08:06 PM | 1 answer(s)

New post