2014-2018 Mazda 3/Mazda 6 Cold Air Box

	CODE	Car Model	Availability	Price
	CODE:AXM-6-120-10	2013+ Mazda 6	Availability:In stock	$149.99
	CODE:AXM-6-120-10	2014+ Mazda 3	Availability:In stock	$149.99

Put your intake air temperatures in check with the CorkSport Cold Air Box designed for the 2014+ Mazda 3 and 2014-2017 Mazda 6 CorkSport Short Ram Intake. The Cold Air Box sources cool air from the OEM location without the restriction of the OEM air box. #ZoomZoom!

Check out the installation instructions below. Share your performance review with the CorkSport community once installed!

The CorkSport Advantage

Performance Advantage

Cold air is denser air, and denser air makes more power. Upgrade your current CorkSport Short Ram Intake or pair the two together for OEM intake air temperatures without the OEM restriction.

Premium Materials

Manufacturer from ABS, the Cold Air Box is durable and heat resistant while nicely blending into the engine bay.

OEM Fit

Utilizing the OEM rubber isolators provides an easy installation and flexible mounting to allow for engine movement.

Additional Features

Compatible with: 2014+ Mazda 3 and Mazda 6
2.0L & 2.5L: Designed for the CorkSport Short Ram Intake and fits the Mazda 3 & 6 2.0L/2.5L.
Designed & Developed in America: CorkSport Mazda Performance is resides in Vancouver, Washington and is located in the beautiful Pacific Northwest.
CorkSport Service & Support: 2 year limited warranty, full color installation instructions, all necessary components, and knowledgeable telephone support at (360) 260-2675.

How To Install Your CorkSport Cold Air Box

It will take you one hour to install the CorkSport Cold Air Box with our easy-to-use instructions.

1 Hour Install Time

2/5 Difficulty

2-Year Warranty

No CEL

My only gripe is that there is no quick access to the air filter and that there is a large gap between it and the cold air intake

Matthew11/06/2024, 05:07 PM

Does great, helps keep extra heat away from the intake while also adding a nice clean look to the engine bay and gives a bit more noise to the intake. One thing I will advise is to use Loctite or some other threadlock as some of the screws for the lid can back out over time.

Install is super easy and quick, though negligible it is lighter than the oem box so I guess you could say it offers weight reduction lol

Brayden Stevens12/06/2022, 10:52 AM

Love it! Easy to install... Took me about 30 minutes to install.. Sounds and performs way better than I expected.
Thank you Corksport. ????????

(Note: If you think about installing one keep the OEM box 'cause you'll need parts on it)

Christian Chabot11/11/2022, 10:28 AM

This is definitely a must have if you have have or are thinking about getting the CS SRI for your 2.0L Mazda 3. Super easy to install and the clarity of the instructions made the install even easier and doubt free.

Eric Dymek06/11/2022, 02:38 PM

Very simple, GET IT with air intake!!! . I loved my mazda 6, now I'm loving it more. Extremely easy to install. And nice extra zoom ...

Daniel Z.10/13/2021, 05:07 PM

Perfect fitment and easy to install. Great build quality. Looks good in the engine bay. Goes great with my axleback exhaust.

David Conner10/06/2020, 04:23 PM

Firstly I notice that people buy just the SRI.. for me it was the 2.5.. Best decision to get both, ease of installation was just an hour if not maybe less if you are picky on install time numbers.

Compliments the design, its a shiny plastic upgrade ... for those criticizing the plastic for not being the same colour.. its Aftermarket its going to look newer than your stock parts.. that is just common sense.

Incease of HP for sure with the 2.5 SRI. Both have been working wonders.
Proudly have my CS Sticker representing these guys and gals for helping the 3rd Gen community!

Id give it a 6 Stars since it has made my CS Midpipe and BORLA axleback sound BEASTLY now!

Thank You!

C

Chrisk441306/02/2020, 08:43 AM

My car is a Mazda 6 2.0L (EU market) 145 HP.

I confirm it is compatible with Injen Short Ram Intake Mazda 3 2.0L (13-17) Polished / Black (Item #: SP6068P). But You need to cut off 3cm of the aluminum tube from the side of the dry air filter (5minutes of work), otherwise it will not fit. I had installed a sports muffler (not corksport, another European mark), the Injen short ram intake and then I made the ECU remap (stage 2).

The results were as following : - Before the tuning : 145 engine HP and after the tuning : 190 engine HP. You gain normally from 145HP to 175HP with a simple ECU remap. But with the muffler and the short ram intake and Corskspot Airbox I gained more HP.

Be awaren the sound can hurt your ears with the airbox. I don't like it personnally but I am planning to make it more quiter by using some noise insulation mats.

PS : Since, Injen is selling the short intake systems for the USA market, there's no info that the short ram intake is compatible with Mazda 6 2.0L (European version), but it fits perfectly for the Mazda 6 2.0L for European market.

David S.10/21/2019, 09:15 AM

Adding the Cold Air Box with the Short Ram Intake was a great decision. The ease of install was a plus as well as the increase of performance of the Intake. Purchasing both was the best move.

Rob02/15/2019, 09:50 AM

This product was designed for the 2.0L engines... the air inlet on this box is 30% smaller than the OEM air inlet that comes with the 2.5L engines.

If you have a 2.5L engine, this cold air box will starve your engine of air under higher loads and decrease the engines power.

The OEM cold air intake that came with the car will produce greater HP and torque numbers on a dyno with the 2.5L engine than you would get with this part installed.
Jason

Jason01/23/2019, 12:24 PM

← Prev

Write a review

Will this fit on a 2016 CX-5, 2.5L?

Asked by Chris | 01/27/2024, 03:13 PM | 1 answer(s)

I am curious to know if this has any type of drain hole for water pulled in from hood intake area? Design looks like it would fill up with water.

Asked by Off2Geo | 04/12/2024, 07:37 PM | 1 answer(s)

Will this fit a 2021 Mazda6 NA?

Asked by Mason | 09/10/2024, 06:26 PM | 1 answer(s)

Dear Team Will this cold air box fit a 2019 mazda 3? Because I really want to buy and install for my mazda 3, looking forward to your reply, thank you

Asked by BAIQUAN LIN | 02/12/2023, 05:38 PM | 1 answer(s)

Is there color options for the box?

Asked by Hector P | 09/07/2022, 08:40 AM | 1 answer(s)

Will this box restrict airflow opposed to no box?

Asked by Carson | 03/28/2022, 03:50 PM | 1 answer(s)

Hey there, i have the 1.5 l engine on my mazda 3, so i need to take the short ram intake from the Mazda 2 for the 1.5 l. Does the intake https://corksport.com/mazda-2-short-ram-intake.html fit with this box on my mazda 3?

Asked by René | 01/26/2022, 09:06 AM | 1 answer(s)

Cuál es la medida del embalaje en el que se envía.

Asked by Jaime Rodríguez | 12/14/2021, 05:30 PM | 1 answer(s)

Will this fit the 2018 Mazda 6 sport ?

Asked by Christopher J Mallery | 11/27/2021, 06:16 AM | 1 answer(s)

Will this cold air box dampen the added noise from the SRI? I want the noise so if this dampens it I might not buy it.

Asked by Isaac | 11/08/2021, 05:21 PM | 1 answer(s)

Curious on the odds this fits the CX3. same exact engine but im sure the mounting points would be the only difference.

Asked by Joe Libraro | 06/25/2021, 07:07 PM | 1 answer(s)

What size are the thumbscrews? Mine feel off due to vibrations I'm assuming.

Asked by Christopher Arguelles | 03/30/2021, 03:36 PM | 1 answer(s)

Does this fit the 4th Gen Mazda3 2.5 l?

Asked by Bruce Fortier | 03/10/2021, 05:22 PM | 1 answer(s)

I have a 2012 Mazda 3 skyactiv and was wondering if you offer a cold air box for my car or if I would be able to retrofit this one to fit my car

Asked by Nicholas Kendrick | 12/01/2019, 09:20 PM | 1 answer(s)

I am planning to get a Corksport Mazda 2 1.5l short ram intake for my 1.5l Mazda 3 2017 hatch, will this cold air box fit with the 1.5l short ram intake in my car?

Asked by Dominic | 03/15/2019, 07:53 AM | 1 answer(s)

Would this fit around the mazda 6 turbo intake? Im surprised that it doesnt come with one.

Asked by Tobias | 03/14/2019, 04:20 AM | 1 answer(s)

What is the power gain over stock when combined with the Corksport SRI? Has the lack of a lid seal been corrected?

Asked by Alan | 02/12/2019, 07:08 PM | 1 answer(s)

I see two different boxes in the photos above. How can I make sure I get the box for my 2.5 2014 mazda 6?

Asked by Alex | 01/30/2019, 10:03 AM | 1 answer(s)

Hello i have this INJEN SHORT RAM AIR INTAKE POLISH FOR 2014-2015 Mazda 3 2.0L +13hp. Will the injen fit in this airbox? Thank you.

Asked by Mike | 01/20/2017, 10:14 PM | 3 answer(s)

I have a 2014 mazda6 sport. Will it fit my stock intake?

Asked by Alex Anderson | 09/26/2018, 08:21 AM | 1 answer(s)

I've had the cold air box for about a year, I noticed one of the thumb screws with washer is missing. Do you offer replacements for this?

Asked by Kevin | 09/03/2017, 04:27 AM | 1 answer(s)

Does the small intake port pose any flow restrictions for the 2.5L? Any plan on increasing the size of the intake port or adding an additional one for increased flow?

Asked by Chris S. | 07/29/2017, 09:21 AM | 1 answer(s)

Will this accent the sound of the SRI even further? In other words, will it make my JBR intake louder? Thanks!

Asked by David | 12/11/2016, 05:54 PM | 0 answer(s)

I bought from you CX-3 Power Series Short Ram Intake 2.0L and I want to ask if I buy this airbox, if will fit into my CX-3? Thanks

Asked by TomT | 10/02/2016, 02:00 PM | 0 answer(s)

I bought from you CX-3 Power Series Short Ram Intake 2.0L. I want to ask. When i buy this Cold Air Box, will be fit for my car (mazda cx-3)?

Asked by Tomas Trlica | 10/02/2016, 11:44 AM | 0 answer(s)

Does it work for the 2015 Mazda 3 2.0L

Asked by Juan | 10/01/2016, 10:28 AM | 0 answer(s)

Do you plan to make a cold air box for the CX-5? or is this compatible?

Asked by JR | 08/08/2016, 09:41 PM | 1 answer(s)

Any thoughts of offering this in carbon fiber? At least the top part perhaps? Could such a thing be special ordered?

Asked by John Rubenstein | 08/15/2016, 03:16 PM | 1 answer(s)

Will this work with the Corksport SRI on a CX-5? Has anyone tried fitting this onto a CX-5?

Asked by Dino | 06/24/2016, 01:08 PM | 1 answer(s)

Is it compatible with the K&N 69-6032TS intake? (2015 mazda 3 gt 2015 2015 2.5l)

Asked by Cody | 04/25/2016, 01:20 PM | 1 answer(s)

I have a 2010 mazda 6 with the 2.5l. I currently have the cork sport intake on it. Would this box with the second gen mazda 6?

Asked by John. | 04/04/2016, 05:44 PM | 1 answer(s)

Anyone hearing a high pitched vibration post installation? 2015 Mazda6 iSport. Instructions followed to a T. Checked and double checked. Just curios before I redo it.

Asked by Scott Kozik | 04/01/2016, 02:55 PM | 1 answer(s)

Is there a comprable item to for the CX3 RAI?

Asked by Lukasz | 03/19/2016, 07:20 AM | 1 answer(s)

This is exactly what I need... for my 2012 Skyactiv. Any chance you'd be able to adapt this design for that?

Asked by Corey | 03/14/2016, 01:48 PM | 1 answer(s)

would your cold air box fit on a injen short ram intake?

Asked by Francisco R. Ada | 03/12/2016, 03:55 PM | 1 answer(s)

Does this decrease the throttle noise any?

Asked by john | 02/28/2016, 07:46 PM | 1 answer(s)

Does this product work with K&N 69-6033TTK Air Intake?

Asked by Martin Occor | 02/28/2016, 07:45 PM | 1 answer(s)

Will the JBR SRI fit in this?

Asked by Andrew Royappa | 02/27/2016, 09:37 AM | 1 answer(s)

I currently have K&N cold air intake installed. Will this enclosure be compatible with that, or is this specific to CS cold air intakes? Thank you

Asked by Dan | 02/27/2016, 12:01 AM | 1 answer(s)

I have a 2015 Mazda 6, do you think this will fit on with the K&N Typhoon intake? If you guys don't mind sending me a sample I can Test it out hehe.

Asked by Minh Tran | 02/25/2016, 07:04 PM | 1 answer(s)