Search results - Search Results

Designed specifically for the turbocharged 2.5L SkyActiv.

Improve power and sound in as little as 30 minutes.

Laser cut and formed bracket supports the CS SRI in the engine bay

Purchase heat shield for better thermal protection

2018+ Mazda 6 Turbo 2.5L & 2016+ CX-9, 20...

$189.99

Quick view

Get great sealing for your upgraded or OEM Speed 3 throttle body with the CS Throttle Body Gasket

Design for OEM and CorkSport 72mm throttle body

An enlarged center opening for no flow restriction with the upgraded CorkSport Throttle Body.

Pair with the CS Intake Manifold Gasket for the best sealing.

Save $2.00

Mazdaspeed Throttle Body Gasket

$19.99 $17.99

Quick view

Set of four spark plugs pre-gapped to 0.026inches

NGK part # LTR7IX-11 1-step colder spark plugs

pre-gapped to 0.026” for stock to 450whp build

Save $10.00

Mazdaspeed NGK 1-Step Colder Spark Plugs ...

$39.99 $29.99

Quick view

Supply your big turbo MS3 with plenty of air with the CorkSport 4 Inch Intake.

Mandrel bent aluminum pipe & custom silicone ensures smooth airflow.

Billet MAF housing with air straighteners ensures accurate airflow readings.

Wrinkle black powdercoat looks good in any engine bay

Easy installation using the OEM mounting points and OEM ports for PCV, BPV, and boost vent.

2007-2013 Mazdaspeed 3 4 inch Intake System

$369.99

Quick view

Laser cut 11 gauge aluminum adds some much needed protection without adding unnecessary weight.

Add some protection to the underside of your CX-5 with the CorkSport Aluminum Skid Tray.

A direct replacement for the flimsy plastic OEM CX5 skid tray

The two piece design offers easy installation and added adjustability.

Easily change your Cx5s oil with the removable oil cover

Save $13.50

Skidplate for 2017+ Mazda CX-5

$269.99 $256.49

Quick view

Designed specifically for the 2019+ Mazda 3, in any configuration.

Larger dual wall tips complement the body lines of the Mazda 3

The CorkSport axle-back exhaust system looks great and sounds even better.

63.5mm (2.5inch) piping and a flow through resonator helps your engine breathe better.

90mm dual wall tips fill out the bumper cutouts and have length adjustment so you can personalize your look.

2019+ Mazda 3 & CX-30 Axle Back Exhaust -...

$499.99

Quick view

Add chassis rigidity and improve driver feedback in as little as 15
minutes.

Polished aluminum bar and black powdercoated steel brackets for a simple & stylish look.

Hardware and step-by-step instructions included for an easy install

Retain easy access to the brake reservoir and battery cables.

Designed for the best balance of strength and weight

2019+ Mazda 3 - Front Strut Tower Bar

$179.99

Quick view

Get great performance on the street and track with the Mazda 3 CorkSport Coilovers.

Approximately 2 inches of height adjustability to get the look you
want

Dial in your ride and handling with 15-way adjustable damping.

Provided hardware for Mazda 3 and Mazda 6 fitment

Spring rates of 7K front, 8K rear offer great handling without being too stiff on the street.

Adjustable front camber plates included to dial in wheel fitment & handling.

Completely change how your Mazda looks and handles with an easy install that can be done in an afternoon.

best wheel size for the 3 rd GEN Mazda 3 is the 18x9.5 +40

Fitting 255/40 tires with aggressive camber

Save $208.00

2014-2018 Mazda 3 & 2013-2017 & 2018+ Maz...

$1,599.99 $1,391.99

Quick view

A functional drop of 2.1 inches lower in the front and rear.

Ride height has a slight forward rake with a driver in the vehicle

With more weight in the rear the CX-5 ride height will flatten out

Natural frequency analysis of the suspension ensures a comfortable, yet sporty ride.

2017+ Mazda CX-5 Lowering Springs - FWD &...

$249.99

Quick view

The first modular cast exhaust manifold for the Mazdaspeed platform

Shallow angle exhaust manifold for high power and great sound

Front and center EWG placement for all the Mazdaspeed engine bay bling

Included firewall heat shield for an easy and safe installation

Optional dumptube makes install and simple weekend project, no fabrication needed

Stainless steel loves to turn a gold then blue color with heat from your Mazda

Modular turbo flange options allow you to choose stock flange, T3 or Precision V-Band

Cast from 304SS with 5mm thick wall tubing

With the Mazdaspeed manifold and the CorkSport CST4 turbo we gained 25 peak HP over the stock manifold.

You can have an extra 25 wheel horsepower in your Mazdaspeed 3 with our turbo manifold over the XS power and other variants of the same exhaust manifold.

Mazdaspeed Exhaust Manifold

$799.99

Quick view

Help your GEN4 Mazda 3 breathe with a CorkSport SRI.

Performance AEM dry-flow filter to improve flow and retain reliability.

Billet aluminum MAF housing to ensure no CELs.

Stainless steel t-bolt clamps provide a secure and great looking clamping system.

Improve horsepower, torque, and sound in as little as 30 minutes for your Mazda 3.

Stainless steel T-bolt clamps for a leak free install and a great look.

Your choice of silicone, filter, and clamp color to personalize your engine bay.

2019+ Mazda 3 - CX-30 - Short Ram Intake ...

$189.99

Quick view

Improve handling and appearance of your 2019-2020-2021 Mazda 3.

Custom stiffer spring rates ensure great handling without ruining
your ride.

We stiffened the rear springs more than the front for reduced
understeer.

The CorkSport lowering springs are about as low as you can go
without needing coilovers.

Rear spring silencers ensure a quiet ride.

Blue powder coating for corrosion resistance and a great look.

2019+ Mazda 3 Lowering Springs - Hatchbac...

$249.99

Quick view

Reduce the stress of hot days on your turbo system.

Laser cut and precision formed steel ensures a great fit.

Retain the OEM air ducting to better feed outside air to your filter.

Wrinkle black powdercoating for a clean look

2018+ Mazda 6 Turbo 2.5L & 2016+ CX-9, 20...

$129.99

Quick view

The CorkSport Aluminum Coolant Reservoir is a direct OEM replacement.

Aluminum construction gives the CS coolant res optimum functionality and reliability.

An internal baffling system ensures no air bubbles enter the cooling system under hard driving.

Sight tube for easy coolant level monitoring. e. Mazdaspeed-Aluminum-Coolant-Tank

Black textured powdercoat finish for a great looks and durability. f. Coolant-Reservoir-Mazda-3

Replace the ugly yellow plastic OEM tank with the CorkSport Coolant Tank.

Coolant Tank for 2010-2013 Mazdaspeed 3 /...

$229.99

Quick view

Eliminate the heatsoak of a TMIC with the CorkSport Speed6 FMIC kit

The CS FMIC kit comes with everything you need to install on your MS6.

2.25” hot side piping and 2.5” to 3” cold side piping offers the best balance of spool time and high horsepower capabilities

A 21”x10”x3” intercooler ensures your Speed6 boost temps stay cool.

Custom wire-reinforced silicone ensures minimal expansion under boost.

Stainless T-bolt clamps are included to minimize the chance for boost leaks.

2006-2007 Mazdaspeed 6 Front Mount Interc...

$899.99

Quick view

Get great sealing for your upgraded intake manifold with the CS Single Runner gasket

Large single ports eliminate the divider in the OEM gasket while also allowing for enlarged ports on the engine and intake manifold

Aluminum Foamette Material offers superior sealing characteristics and reusability

Lower IM mount spacer included to prevent warpage to intake manifold or cylinder head

Pair with your Mazdaspeed port injection system

Save $4.00

Mazdaspeed Intake Manifold Gasket

$39.99 $35.99

Quick view

Stock flange fitment, boost by 3500rpm and power to 7000...the CST4 is the turbo for your Mazdaspeed

Internal wastegate setup makes install straightforward and simple.

Add some noise and top end power in your Mazdaspeed with the 0.82 A/R EWG Turbine Housing

400whp+ Mazdaspeed 6 and all the power on under the curve

The easiest Mazdaspeed 3 400whp option today with functional IWG setup.

Included with all IWG turbos, a ceramic coated heatshield.

Mazdaspeed 3/6 CST4 Turbocharger

$1,099.99

Quick view

Tial is the best EWG option for the Mazdaspeed 3 and 6 and the CorkSport go to for our cast exhaust manifold.

304 stainless steel cosntruction ensures a long life of use on your Mazdaspeed.

The tial MVR EWG includes everything shown above, fitting, clamps and more to make installation a breeze with your Mazdaspeed turbo

Each Tial 44mm Wastegate includes an assortment of springs to allow you to tailor the EWG for your Speed

The compact design allows for extra clearance and easy installation in the Mazdaspeed platform.

Save $43.00

Tial Mazdaspeed 3 and Mazdaspeed 6 MV-R W...

$435.99 $392.99

Quick view

X Clutch offers a performance clutch upgrade for the Mazdaspeed 6, Mazdaspeed 3, MPS 6 and MPS 3.

The X Clutch kit includes all of the needed installation parts and alignment tool for your Speed3 and Speed 6.

The complete high horsepower twin disc clutch for the Mazdaspeed DISI platform

Save $155.01

XClutch Mazdaspeed 3 and Mazdaspeed 6 Per...

$1,095.00 $939.99

Quick view

Open up your Mazda 6 Turbo with the CorkSport Axle Back Exhaust.

High flowing resonators remove drone and other unwanted noise without affecting the Skyactiv 2.5T performance.

Retain the OEM oxygen sensor for no CELs and no tuning required for your Mazda 6 Turbo.

Polished 80mm piping looks great and livens up your Mazda 6.

Description: Gain some power and much needed noise from your SkyActiv Turbo.

2018+ Mazda 6 2.5L & 2.5L Turbo Axle Back...

$599.99

Quick view

Designed specifically for the 2017+ Mazda CX5 with SkyActiv 2.5L turbocharged engine

This axle-back exhaust system looks just as good as it sounds b. Exhaust-Upgrade-Mazda-CX5

Using the OEM mounting points, the beautiful stainless steel 80mm piping, resonators and exhaust tips fit just as good as the stock exhaust system

Liven up your 2.5T CX-5 with some volume without compromising the daily driving comfort.

Full stainless steel, TIG welded construction ensures strength and good looks for your Mazda Cx5

2017+ Mazda Cx5 Axle Back Exhaust

$599.99

Quick view

The CorkSport Coilovers offer great performance for the street or track.

15-way adjustable damping ensures you get the ride you prefer

Easy to access damper adjusters mean no disassembly needed to tune your ride and handling.

7K front springs and 8.5K rear springs offer supreme handling characteristics without being too stiff for the street.

Up to three degrees of negative camber in the front to perfect handling and wheel fitment.

Approximately 2 inches of height adjustability to dial in your stance

Change how your Mazda feels with an easy install that does not require a spring compressor.

Save $208.00

2004-2013 Mazdaspeed 3 & Mazda 3 Coilover...

$1,599.99 $1,391.99

Quick view

OEM Shape to fit onto your intake manifold

Easy plug and play connector. No extension harness needed

Save $10.00

Mazdaspeed 4.5 Bar MAP Sensor

$99.99 $89.99

Quick view

Let your CX-9’s turbo breath better with the CorkSport Axle back Exhaust.

High flow, pass through resonators eliminate drone while retaining good flow characteristics.

Stainless steel construction ensures an exhaust that will last a lifetime.

Exhaust tips were extended and increased in size to fill out the bumper cutouts and give a clean look.

Spice up your grocery-getter with the some added noise and a nice visual boost.

2016+ Mazda CX-9 Axle Back Exhaust

$599.99

Quick view

Search resultsProducts found: 263

About CorkSport

Shopping

Connect

Social links