CORKSPORT 2014+ Mazda 3 Axle Back Exhaust

	CODE	Body Type	Availability	Price
	CODE:AXM-6-101-10	Hatch	Availability:In stock	$649.99

Add power and upgrade the look of your Mazda3 with the CorkSport Power Series Axle-Back Exhaust. The 2014+ Mazda 3 Axle Back Exhaust is a great way to increase power and improve the sound of your Mazda3.

The Mazda3 gave the engineers at CorkSport free reign to design an axle-back exhaust in the best way possible fitting to the graceful design of the Mazda 3. As always, the CorkSport Mazda3 Axle Back Exhaust was built using only the highest quality materials and design. This means the CorkSport Mazda 3 exhaust is constructed from T-304 stainless steel, is TIG welded with precision laser cut flanges, and features full mandrel bending to eliminate any possible flow restrictions.

The CorkSport Advantage:

Stainless Steel T304 construction Stainless tips for corrosion resistance and a clean stylish look
Mandrel bent, true 65 mm piping for increased flow and more power from your engine
90mm Tips: Dual wall slant cut tips to back up the performance with a great look
Stainless Steel Resonator: For a deep tone and long life
CorkSport Service and Support: Receive a 2-year warranty, full-color installation instructions, all of the needed installation hardware and knowledgeable telephone support

* Fitment only for hatch body style, sedan body style is available here: /2014-mazda3-axle-back-exhaust-sedan.html

2014-2018 Mazda 3 Hatchback Exhaust Video

Disclaimer: NVH (noise, vibration and harshness) in the cabin of your vehicle will be slightly increased by the installation of this exhaust, especially on vehicles equipped with an automatic transmission.

Install time 3/5 Difficulty 2 year warranty No CEL

How To Install the Mazda 3 Axle Back Exhaust

It will take you Approx. 2 hours to install.

2 hour Install Time

3/5 Difficulty

2-Year Warranty

No CEL

Great product! Shipping was on time and I ended getting it installed by a professional. What I like about the CorkSport is that it's not obnoxious sounding compared to others. It makes my Mazda3 SGT sound like more of a performance car rather than a whimpy sounding car.

JDwick10/18/2023, 12:56 PM

From the moment I bought my 2017 hatch new, I was insistent that it get an exhaust. The car was far too quiet. This setup allows for a subtle transition from low rpms to revving it up. Cold start can be a little rough at times, but it sounds amazing under load. No Honda raspiness, just a solid deep tone, which is a feat of engineering when it is on the tail end of a 2 liter. Visually it looks great and is easy to clean.

Brian B12/15/2020, 05:43 PM

Love the sound. Installed 2017.
Clears the Curt hitch receiver with plenty of room.
Love that I can hear the engine at idle, amazing low tone that doesn't draw attention 2 blocks away like it's a Honda.
Does make the cold start quite a bit louder.

Corolla_alan09/30/2020, 02:24 PM

The exhaust has a pretty decent resonant section around 1k-2k RPM that's a little annoying (esp. on cold start). It's not very loud from the outside which is nice but the interior volume at the resonance would lead you to think it's pretty loud. Good build quality from a visual perspective but I'm not sure I would buy again.

Charles Murphy08/27/2020, 04:48 PM

I don't ever write reviews about products I buy but had to for this product. I'm Really pleased with the craftsmanship, customer service, and overall quality of the exhaust. The videos that people post on youtube don't do it any justice. I was kind of "iffy" about it when I watched those videos but they don't capture the deep and refined sound that surprised me when I first started the car. It doesn't sound like a can of bees by the way. If you're interested in this exhaust, I highly recommend it!

Brandon F09/29/2018, 10:54 PM

Sound wise, the axleback sounds way better than stock, specially at lower rpm, although at times it doesnt sound like it's even there. The real surprise for me is at the acceleration. I've read better that the axleback exhaust doesnt have any hp gain, but after installing mine I really notice a more linear/smoother acceleration. Where as before if tends to dip when I floor it before accelerating aggressively and then dipping again.
Overall very please with the performance. I might add an aftermarket midpipe in the near future.

Eric Gee05/07/2018, 11:15 PM

The exhaust shipped quick, and it sounds great. However, mine showed up with 3 scratches/chips on the left tip. the first day I had the exhaust on my car the exhaust tip had 3 noticable rust spots from the scratches/chips. Even if this is covered by warranty, I live in Canada so I will have to pay $320 in shipping and customs fees for a replacement exhaust. I thought everybody should know before they purchase.

Ben06/06/2017, 08:23 AM

Agree with all other posts about nice sound, great looks, etc. I have mine paired with the SRI and cold air box, 2016 Mazda 3 sGT. It's louder for sure at low revs and upon cold startup, but not too bad. It's actually quieter than stock at idle. The deep tone is awesome and it looks really sharp. I have the factory appearance package installed, and there was no trouble at all fitting this around the rear diffuser - clean install. One tip though is that the OEM muffler assembly really requires a deep 14 mm socket - standard won't cut it for the removal stage. I added deep 17 mm and 14 mm sockets to my tool box for this install and would highly recommend it. Total leisurely install time from starting to get tools out to finished cleaning up, including the trip to get the deep sockets = 3 hrs. No sweat.

Eric Riggs01/25/2017, 09:36 AM

Just got this exhaust on. It sounds pretty good. It DOES drone at about 1500 rpm with little to no throttle (slowing down for stops), Sounds like a sub-woofer. However that's a pretty normal side effect when going for as deep of a tone as this exhaust has. It's not quite as loud as I thought it'd be. Just slightly louder than stock, but great for a daily driver. Overall pleased. Just wished someone had mentioned the small amount of droning in a review.

Jake09/04/2016, 08:39 AM

I ordered an axle back exhaust for my Mazda3 2015 SP25GT sedan. It arrived promptly to Perth, Western Australia, very well packed and in perfect condition.

I was very pleased with what was obviously a well made product. It fitted perfectly, looks good and sounds just as good as I hoped it would be. I can only add that it was a pleasure to do business with Corksport and I will be recommending Corksport to everyone I know. Thanks again. Robert

Robert Stevenson08/17/2016, 11:13 PM

← Prev

12 3 4 5 6

Write a review

For shipping purposes overseas. What is the total weight of the complete package?

Asked by Brian Peters | 08/26/2024, 07:03 AM | 1 answer(s)

does the hatchback exhaust fit a 2015 Mazda 3 sedan?

Asked by AY | 05/21/2023, 04:10 PM | 1 answer(s)

What are the peak decibels both below and above 35mph? Specifically measured at a distance of 50ft if possible.

Asked by Connor | 12/10/2022, 09:08 PM | 1 answer(s)

I am looking into doing a rear bumper mod and having a shop do cut out for exposed tips for my '18 Sedan. Would the Hatch system fit or is the length significantly shorter? I don't want the downward facing tips.

Asked by Ryan | 08/08/2020, 10:01 AM | 1 answer(s)

Is there any information available on the weight of the original and this Axle-back? Amazon says this system is 30 pounds, I find that hard to believe...

Asked by Chris T. | 10/29/2019, 09:46 AM | 1 answer(s)

Will this clear a hitch?? Really interested in purchasing but don't want to have clearance issues with the hitch. Thanks in advance!

Asked by Adam S | 08/06/2019, 07:44 PM | 3 answer(s)

Which diameter does the exhaust tip have?

Asked by felix | 11/12/2018, 12:00 PM | 1 answer(s)

Will this exhaust fit a 2010 mazda 3 2.5 sedan?

Asked by Edward | 10/23/2018, 11:02 PM | 1 answer(s)

How is mileage effected after installing it.

Asked by Ather Syed | 02/19/2015, 08:28 PM | 3 answer(s)

Is it Illegal in Illinois?

Asked by Gabriel | 03/30/2016, 05:20 PM | 2 answer(s)

Any plans on making an axle-back exhaust compatible with the OEM rear aerokit for the hatchback?

Asked by Chris Oetomo | 08/18/2015, 03:57 PM | 2 answer(s)

I'm a little confused as to what happens to the catalytic converter. In the "cat. back" application, the factory exhaust is decoupled at the down pipe, which appears to be ahead of the converter. Does the mid pipe resonator also function as a converter? Please set me straight.

Asked by Bob Ingalls | 03/30/2018, 05:37 AM | 1 answer(s)

Will this fit the 2017 mazda 3 2.0 Skyactiv?

Asked by Alex | 03/10/2018, 04:07 AM | 1 answer(s)

Do you have the dual exit muffler for the Mazda 3 1.5L hatchback? I am looking for the dual exit muffler.

Asked by Tanjir Ahmed | 10/08/2018, 05:48 AM | 1 answer(s)

Will this fit a 2018 mazda3 hatch?

Asked by Jordan Canning | 04/02/2018, 06:55 PM | 1 answer(s)

Will this fit a 2018 Mazda3 hatch?

Asked by Jordan | 04/02/2018, 06:54 PM | 1 answer(s)

Does it fit my 2017 Mazda 3 HB 2.5?

Asked by Rodrigo | 05/14/2018, 01:21 PM | 1 answer(s)

Do these mufflers hang lower than the stock muffler? I'm thinking of installing a trailer hitch and was wondering if it would fit with this exhaust installed.

Asked by Roy Miller | 09/27/2017, 02:14 PM | 1 answer(s)

Why is there not a Catback exhaust available for the Hatchback. Did Mazda Make this exhaust better then the sedan.

Asked by Cody Conrad | 01/08/2017, 05:44 AM | 2 answer(s)

Will this exhaust fit a 2.2L diesel Mazda 3? What is the diameter of the centre pipe in inches?

Asked by Will this fit a 2.2L diesel Mazda 3? | 07/10/2016, 11:42 AM | 1 answer(s)

The sound on the 2.5L video sounds great. Is the output 77dB closed and 55dB idle? I have a 2.0L 2015 Mazda 3 hatchback with a resonator delete and was wondering if it would still keep that deep tone except a little bit louder. Do you know how it would sound like on a 2.0L with a resonator delete?

Asked by Jason Nguyen | 08/17/2016, 04:50 AM | 1 answer(s)

Will I loose my 5 year warranty from mazda if installing this?

Asked by Nacho | 09/13/2016, 03:13 PM | 1 answer(s)

What about on a 1.5L 2015 hatchback, just for looks?

Asked by Nic | 09/10/2016, 10:06 PM | 1 answer(s)

If I install this axle-back system in a 2016 Mazda 3 iSport hatch, do I need to cut any of the existing pipe?

Asked by Nic | 08/11/2016, 08:12 PM | 1 answer(s)

5-10hp gains is what you get on the 2.0L engine, what about the 2.5L engine, do you get the same gain?

Asked by Kannan | 06/16/2016, 10:35 AM | 1 answer(s)

How much louder is it compared to the stock exhaust on a 2014 mazda3 S touring with the 2.5? I ask because I live in Maine and we can't have exhausts that are much louder than the stock exhaust.

Asked by Austin Archer | 06/05/2016, 10:55 PM | 1 answer(s)

Will installing this exhaust affect my manufacturing warranty?

Asked by Scotty | 05/13/2016, 01:07 PM | 3 answer(s)

Will the hatchback exhaust void the manufactures warranty?

Asked by Scotty | 05/08/2016, 10:51 PM | 3 answer(s)

IS it illegal in Illinois

Asked by Gabriel Duran | 03/30/2016, 05:21 PM | 0 answer(s)

What is the estimated hp gain when used on the 2.0L?

Asked by Livinthedream13 | 03/11/2016, 05:19 AM | 1 answer(s)

Why exactly doesn't this fit with the rear "Mazda accessory skirt"? Can it be augmented to fit? It doesn't seem like it would be difficult.

Asked by herbiecarter | 08/14/2015, 09:37 PM | 2 answer(s)

Will this fit a sedan if I have cut-outs or aftermarket bumper with dual exit?

Asked by kevin | 02/04/2016, 11:45 PM | 1 answer(s)

Will this fit 2013 mazda BL 2.5 litre?

Asked by Matthew | 01/30/2016, 02:33 AM | 1 answer(s)

Would this be suitable for the twin turbo diesel???

Asked by Dejan027 | 12/11/2015, 06:43 AM | 1 answer(s)

Will this fit a 2016 mazda3 hatchback automatic

Asked by B nelson | 11/10/2015, 08:46 AM | 1 answer(s)

Do you have an Australian dealer for this exhaust and if so who is it also if not how much would this cost to australia

Asked by Geoff | 10/06/2015, 12:22 AM | 1 answer(s)

is this legal in Spain?

Asked by Jes | 09/29/2015, 07:06 AM | 1 answer(s)

Does the Corksport exhaust use 17mm bolts to attach to the stock midpipe? Or do you use the stock 14mm hardware? The instructions are only a guide for the catback installation.

Asked by Seth | 09/08/2015, 11:56 AM | 1 answer(s)

is this legal in Switzerland? if not, do you know how to do a registration?

Asked by Pepeto09 | 08/23/2015, 02:27 PM | 1 answer(s)

Will this fit my 2015 3 s gt hatch?

Asked by Chris | 08/20/2015, 07:10 AM | 1 answer(s)

Ok, so its not approve by for California emissions, but hypothetically, if it were installed on a vehicle and taken to a local emissions shop, would it be able to pass the measured emissions tests?

Asked by jerry | 07/21/2015, 01:22 PM | 1 answer(s)