CorkSport Mazda Performance
360-260-2675
Vancouver, WA

HRS

M-TH 9A-5P | F 9A-12P | SA-SU CLOSED

Shipping Estimator Shipping Estimator

Get rates

2014-2018 Mazda 3 and 2014-2017 Mazda 6 Front Strut Tower Bar

33 reviewsWrite a review
 
Price: $179.99
Price in points: What are Points?180 points
Add CorkSport's front strut tower bar to your Mazda 3 or Mazda 6 2014 to increase handling.
AXM-3-020-10
+−
Add to wish list

CorkSport's front strut tower bar for 2014-2018 Mazda 3 and Mazda 6 increases the torsional stiffness of the chassis front end to improve driving feedback and response. Despite what many think, the front tower bar is not for appearance only. It advances the handling and stability of your car when you take a hard corner and body roll in general. Decrease the stress on your car's suspension and boost traction by adding our cost effective strut bar. You'll certainly feel the difference.

Pair it with our rear sway bar for optimal handling. Share your experience with the CorkSport community by adding a review.

The CorkSport Advantage



CorkSport's strut tower bar for Mazda3 2014 is just right.



Material: We created the strut tower bar out of 2024-T4 aluminum for Mazda 3 and Mazda 6. It not only provides excellent strength, but is also lightweight and durable.













A closeup view of the end hardware of our strut tower bar.



Hardware: T304 stainless steel hardware for securing the bar to the bracket, for long-lasting looks and corrosion resistance.













Our clean, polished Mazda 3 aluminum strut bar will look sharp in your engine bay.



Finish: Polished aluminum strut bar for great looks with the stylish CorkSport logo plate.











Additional Features

  • Fits all engines: Works with the 2.5. 2.0 SkyActiv petrol models and 2.2 SkyActiv Diesel.
  • Utilizes factory mounting points: Easily installs to factory mounting points with four bolts making installation a breeze.
  • Extruded chambered bar design: Providing a double strength design over a standard tower bar.
  • Engineered in the USA: Designed and engineered in Vancouver, Washington.
  • CorkSport service and support: Includes a 2-year limited warranty, full color installation instructions, and all necessary strut bar parts. We provide knowledgeable telephone support at 360-260-2675.

How To Install CorkSport's Front Strut Tower Bar In Your Mazda3 Or Mazda6

It will take you between 15-45 minutes to install your front strut bar. Follow our easy installation instructions to enhance your handling.

Great value for the price. Painted the blue brackets red to match the rest of my engine bay. Looks fantastic. Tested it out by doubling the suggested speed on a couple turns. Felt like it helped but it could be placebo effect.
Adam Soyring05/16/2017, 11:53 AM
Wildly easy install - took longer to get it unpacked than to gather wrenches and install. Noticeable positive difference in handling (2016 Mz3sGT) - makes the steering even more precise and planted and cornering hard feels more controlled and even more fun than before. I can't believe this isn't stock gear on the s trim level. Thanks CS!
Eric Riggs02/22/2017, 11:41 AM
The bar performs as advertised and installed simply enough. It is designed with the hex nuts facing the firewall, which means you will need a short socket to squeeze in to tighten the hardware. Would be better to have the allen bolts facing the firewall in my opinion. The CS logo is also crooked on the bar, which bugs me a little each time I pop the hood.
Arkadiusz Tupko10/02/2016, 10:56 AM
Gives the car a much nicer feel on the onramps/twisties and makes a very noticeable improvement at the autocross track.

15 minute install - and that counts the 10 minutes looking for the right socket adaptor.

Great product at a great price. Going to do the rear anti-sway bar before next season.
John Waters08/31/2016, 07:30 PM
Super easy to install and noticeable difference . . . I immediately took vehicle to known areas I drive and have noticed bad roll at high speeds in the past. Can totally take those same turns at higher speeds than before with real improvement on roll.



Cork only getting a 4 star because when I called to ask if I could have parts powder coated I was told no, but noticed another reviewer mention that this service was offered to him :(
Tim O'C06/11/2016, 12:18 PM
Feels much more planted and flat around corners and cloverleaf on and off ramps can take them much more comfortably and while taking turns, had to shave down a bit to fit my 3, easy fix though.
Liam JPR06/08/2016, 11:19 AM
Looks great and easy to install. No noticeable handling improvements however.
TW02/09/2016, 12:05 PM
Super Easy install, noticed the difference right away, front end felt very planted to the pavement
Aydan Corrigan12/28/2015, 08:39 PM
Great item, easy & fast assembly, noticeable difference during cornering (tested before & after several times but might be slight or no differencefor casual drivers)
Ye Myo07/17/2015, 09:39 PM
The CS strut bar should be your first mod. It's lightweight, easy to bolt on and gives a noticeable increase in handling. CorkSport was kind enough to get it powdercoated for me at a fair price and it looks fantastic.
John Rubenstein04/23/2015, 07:05 PM
← Prev
1234
Next →
Write a review

Excuse me, do you ship to Mexico?

Asked by Juan carlos | 03/19/2024, 11:55 AM | 1 answer(s)

I have a 2015 Mazda 3 what Corksport Coilovers. Should I torque the strut nuts to 23-28 ft/lbs like on the strut mount or 30-35 ft/lbs as noted on the coilovers?

Asked by Rodrigo Guzman | 08/01/2022, 11:12 AM | 1 answer(s)

What is the total gross weight of the product including packaging?

Asked by Ehsan | 04/04/2021, 10:40 AM | 1 answer(s)

Will installation of these products violate my current manufacturers warranty through Mazda on my 2018 Mazda 3 GT Premium?

Asked by Shawn Haskin | 12/23/2019, 10:11 AM | 1 answer(s)

I currently have this on my 2016 mazda6 but am upgrading to a new turbo version this week. I also own a 2016 mazda3. Will the strut bar from my 16 mazda6 fit the 16 Mazda 3? Thanks in advance!

Asked by Carlos | 08/23/2019, 11:13 PM | 1 answer(s)

will this fit the new 2019 mazda 3 hatchback?

Asked by matt  | 04/11/2019, 04:31 AM | 1 answer(s)

Will this fit the 2018 Mazda 6 2.5l turbo?

Asked by Mike  | 01/21/2019, 10:26 AM | 3 answer(s)

Does this fit my European 2018 2.0L Mazda 3?

Asked by Stijn | 02/28/2018, 05:17 AM | 1 answer(s)

Does the bar come colored as shown?

Asked by CJ McGraw | 10/27/2016, 12:07 PM | 1 answer(s)

Would this work on a 2016 CX-5 with the 2.5 SKYACTIV motor? I understand it is not meant for this other model, however, just curious... if not, will CorkSport be producing a strut bar for the CX-5?

Asked by Sergio | 08/05/2016, 11:28 PM | 1 answer(s)

Does the install of this bar have any effect on my 2016 Mazda 3 SGT factory warranty? TIA

Asked by SPoleske | 12/30/2015, 02:18 PM | 1 answer(s)

Does the vehicle need to be jacked up to install the strut bar, or can the wheels be supporting the weight of the car?

Asked by Patrick  | 08/14/2015, 05:16 PM | 1 answer(s)

Can the painted components (or better yet, all of the parts) come in red (to coordinate with the red interior stitching and the car's red paint?

Asked by Scott | 07/25/2015, 08:03 PM | 1 answer(s)

The front Strut tower bar, works whit Hood Strut Kit? 2014 Mazda 3 SGT

Asked by Alberto Segura | 01/13/2015, 06:43 PM | 1 answer(s)
New post
Mazda performance parts financing is available with CorkSport

Looking to finance your parts purchase and want to get 6 months NO interest on any purchase over $199? Click on the image above for more details.


Recommended Products Recommended Products

2014-2018 Mazda 3 Rear Sway Bar
$249.99
2014-2018 Mazda 3, 2014-2021 Mazda 6, 201...
$199.99