2014+ Mazda 3 and 6 Front Strut Tower Bar

	CODE	Fitment	Availability	Price
	CODE:AXM-3-020-10	Mazda 6	Availability:In stock	$169.99
	CODE:AXM-3-020-10	Mazda 3	Availability:In stock	$169.99

CorkSport's front strut tower bar for 2014-2018 Mazda 3 and Mazda 6 increases the torsional stiffness of the chassis front end to improve driving feedback and response. Despite what many think, the front tower bar is not for appearance only. It advances the handling and stability of your car when you take a hard corner and body roll in general. Decrease the stress on your car's suspension and boost traction by adding our cost effective strut bar. You'll certainly feel the difference.

Pair it with our rear sway bar for optimal handling. Share your experience with the CorkSport community by adding a review.

The CorkSport Advantage

CorkSport's strut tower bar for Mazda3 2014 is just right.

Material: We created the strut tower bar out of 2024-T4 aluminum for Mazda 3 and Mazda 6. It not only provides excellent strength, but is also lightweight and durable.

A closeup view of the end hardware of our strut tower bar.

A closeup view of the end hardware of our strut tower bar.

Hardware: T304 stainless steel hardware for securing the bar to the bracket, for long-lasting looks and corrosion resistance.

Finish: Polished aluminum strut bar for great looks with the stylish CorkSport logo plate.

Additional Features

Fits all engines: Works with the 2.5. 2.0 SkyActiv petrol models and 2.2 SkyActiv Diesel.
Utilizes factory mounting points: Easily installs to factory mounting points with four bolts making installation a breeze.
Extruded chambered bar design: Providing a double strength design over a standard tower bar.
Engineered in the USA: Designed and engineered in Vancouver, Washington.
CorkSport service and support: Includes a 2-year limited warranty, full color installation instructions, and all necessary strut bar parts. We provide knowledgeable telephone support at 360-260-2675.

How To Install CorkSport's Front Strut Tower Bar In Your Mazda3 Or Mazda6

It will take you between 15-45 minutes to install your front strut bar. Follow our easy installation instructions to enhance your handling.

USE THE CORKSPORT PROVIDED NUTS. The instructions do not mentioned the nuts provided in the kit. It should be emphasized that you need to use the provided nuts. On my 2018 Mazda3 the factory nuts have an internal shoulder and do not grab enough thread with the bar in place. 3 nuts managed to torque to spec. 1 stripped off the top 2 threads of the struts stud. With a little bit of finagling to get past the stripped threads, the provided nut was installed and grabs plenty of thread further down on the stud.

Geoffrey Furman01/29/2022, 01:00 PM

I love the look it gives under the hood, it really helps make the space look better. As far is performance I noticed an immediate improvement from the installation of the part, would and have recommended it.

Neal Lager04/15/2021, 03:11 PM

After installing this tower bar, which was a piece of cake, of course, I noticed some more confidence in turning in and general transient handling conditions. Compared to how much the rear sway bar costs and how much result you get for that, I'm not sure the money spent on this strut tower bar is well worth it with a car with little to no suspension modifications. FWIW, I'm running this with only having done a rear sway bar. If you've done both sway bars and springs/struts, you may get more of a reward out of this but it was slight for me. I would still recommend for some additional feel and confidence in handling.

Charles Murphy08/27/2020, 05:05 PM

Just received and installed my strutbar definitely makes a difference in handling. Turning is greatly improved these cars do have athletic suspensions this only makes it better. This should be your first buy in suspension upgrades quality piece doesn't hurt the under hood look either.

Mark08/26/2020, 07:42 PM

I just hit 100k on my '14 Mazda 6 so I decided it is time to start with some mods (CPO warranty expired lol). The strut tower bar shocked the hell out of me. If I would have known that the handling would have been this improved I would have bought it when I bought the car. Great place to start for the price. Keep up the awesome work CorkSport!

Brad Wilson11/24/2019, 02:17 PM

It's a good looking product that reduces understeer. The only downside is that you have to reuse the OEM nuts. The ones that came with my 2018 GT 3 only have 3 threads on the top half and none on the bottom half.

Since these 3 threads are attaching at the very top of the threading, and there is added stress and vibration, it will eventually destroy the threading that pokes through the strut tower. I had to replace the OEM strut rubber mounts and the nuts twice due to this.

If you want to use this product invest in some locking flanged nuts that are M10 x 1.25 sized.
Jason

Jason10/22/2019, 07:41 AM

This not only looks great in the engine bay, but it increases your car's handling by a LOT. The front-end stiffness is increased significantly and the car stays grounded in tight corners.

Installation Video: https://www.youtube.com/watch?v=NFMzIcCZabM
This shows how quick and easy it is to install and gives a good look on how it looks in the engine bay.

Adrian Eusebio03/24/2019, 10:58 AM

Definitely more stable in high speed cornering and even just switching lanes. Was mostly looking for a more stable feel after going over dips in the road at high speeds. The car would sometimes steer to the sides. This defiantly did the job.

Jesus Ochoa08/30/2018, 11:07 AM

The easiest mod I've ever done, literally falls into place.
Quality piece, perfect fitment.

Shawn Manny06/28/2018, 05:01 AM

Installed this on my 2016 Mazda 6 Skyactiv 2.2 Diesel. (Yes it fits the diesel everyone) The car feels a lot tighter at the front and definately stiffer and the car stays flat through corners even at double the recommended speed signs ! It's probably the cheapest suspension mod available, but also one of the most effective and very simple to install. Highly recommended.

Rod05/18/2018, 05:26 AM

← Prev

123 4

Next →

Write a review

Excuse me, do you ship to Mexico?

Asked by Juan carlos | 03/19/2024, 11:55 AM | 1 answer(s)

I have a 2015 Mazda 3 what Corksport Coilovers. Should I torque the strut nuts to 23-28 ft/lbs like on the strut mount or 30-35 ft/lbs as noted on the coilovers?

Asked by Rodrigo Guzman | 08/01/2022, 11:12 AM | 1 answer(s)

What is the total gross weight of the product including packaging?

Asked by Ehsan | 04/04/2021, 10:40 AM | 1 answer(s)

Will installation of these products violate my current manufacturers warranty through Mazda on my 2018 Mazda 3 GT Premium?

Asked by Shawn Haskin | 12/23/2019, 10:11 AM | 1 answer(s)

I currently have this on my 2016 mazda6 but am upgrading to a new turbo version this week. I also own a 2016 mazda3. Will the strut bar from my 16 mazda6 fit the 16 Mazda 3? Thanks in advance!

Asked by Carlos | 08/23/2019, 11:13 PM | 1 answer(s)

will this fit the new 2019 mazda 3 hatchback?

Asked by matt | 04/11/2019, 04:31 AM | 1 answer(s)

Will this fit the 2018 Mazda 6 2.5l turbo?

Asked by Mike | 01/21/2019, 10:26 AM | 3 answer(s)

Does this fit my European 2018 2.0L Mazda 3?

Asked by Stijn | 02/28/2018, 05:17 AM | 1 answer(s)

Does the bar come colored as shown?

Asked by CJ McGraw | 10/27/2016, 12:07 PM | 1 answer(s)

Would this work on a 2016 CX-5 with the 2.5 SKYACTIV motor? I understand it is not meant for this other model, however, just curious... if not, will CorkSport be producing a strut bar for the CX-5?

Asked by Sergio | 08/05/2016, 11:28 PM | 1 answer(s)

Does the install of this bar have any effect on my 2016 Mazda 3 SGT factory warranty? TIA

Asked by SPoleske | 12/30/2015, 02:18 PM | 1 answer(s)

Does the vehicle need to be jacked up to install the strut bar, or can the wheels be supporting the weight of the car?

Asked by Patrick | 08/14/2015, 05:16 PM | 1 answer(s)

Can the painted components (or better yet, all of the parts) come in red (to coordinate with the red interior stitching and the car's red paint?

Asked by Scott | 07/25/2015, 08:03 PM | 1 answer(s)

The front Strut tower bar, works whit Hood Strut Kit? 2014 Mazda 3 SGT

Asked by Alberto Segura | 01/13/2015, 06:43 PM | 1 answer(s)

New post