CorkSport 2014-2018 Mazda 3 Axle Back Exhaust for Sedan

Upgrade your 2014-2018 Mazda 3 with the CorkSport Axle Back Exhaust (ABE), a perfect blend of performance, style, and craftsmanship. Designed to enhance your driving experience, this high-quality exhaust delivers a bold, aggressive sound without the unwanted drone. With its polished 65mm mandrel-bent piping, 90mm single-walled tips, and T304 stainless steel construction, the CorkSport ABE not only boosts performance but also adds a sleek, eye-catching finish to your car. Built to last, it’s the perfect addition to take your Mazda 3 to the next level.

Listen to the rev in the video below:

The CorkSport Advantage

A 2014-18 Mazda3 axle back exhaust for Sedans by CorkSport.

Performance Sound:

The CorkSport Axle Back Exhaust (ABE) improves the sound of your 3rd Gen Mazda. By swapping out the restrictive stock muffler for the high-flow resonator, the axle back frees up a bit of performance and provides an amazing-sounding exhaust note. The resonator provides an aggressive note without the annoying drone often associated with poorly designed exhaust systems.

A closeup view of a tip for the 2014+ Mazda3 axle back exhaust for Sedans by CorkSport.

Upgraded Style

The axle-back exhaust for the 2014-2018 Mazda 3 improves on the OEM design. The exhaust, while maintaining fitment, increases the diameter to 65mm, improving both the flow and sound of the exhaust. While the original exhaust hides the tips, offering little to be desired. The CorkSport ABE has single-walled construction with 90mm polished tips and CorkSport-branded tags welded for an upgrade in appearance.

Materials & Manufacturing

The Mazda 3 axle-back exhaust is constructed from quality materials and precision manufacturing. The exhaust is made of T304 stainless steel, offering superior corrosion resistance from the elements and road debris. The piping is mandrel to 65mm diameter, which provides a smooth-flowing design. Each connection is TIG welded to ensure long-lasting strength at joints, while the flanges are laser cut to 7/16-inch thickness and resistant to warping. The pipe is polished for a beautiful shine and marked with exhaust tips for added style.

Additional Features

Engineered in the USA: Designed and Engineered in Vancouver, Washington.
CorkSport service and support: Includes a 2-year limited warranty, full-color installation instructions, all necessary gaskets and hardware, and knowledgeable telephone support at 360-260-2675.

If you don't have a 2014-18 Mazda 3 Sedan, then view our axle back exhaust for those with a hatch-back model.

The exhaust is specific for Mazda 3 Sedans.
NVH (noise, vibration and harshness) in the cabin of your vehicle will be slightly increased by the installation of this exhaust, especially on vehicles equipped with an automatic transmission.

How To Install A CorkSport 2014-2018 Mazda 3

It will take you two hours to install the CorkSport Mazda3 Exhaust with our easy-to-use instructions.

2 Hour Install Time

3/5 Difficulty

2-Year Warranty

No CEL

Love it! The exhaust is actually fairly loud in person—the videos don’t quite do it justice (although I also have a short ram intake installed). I can’t imagine you’d need more than just the axle-back. The car has a nice deep, boomy sound. It’s quiet at lower rpms with little to no drone. Install was a little difficult with the rusted bolts and flange but definitely doable otherwise. Keep in mind the flange bolts are welded to the flange (at least in my ‘16) so you only have to undo the two 14mm nuts facing the front of the car.

Adrian Ng05/22/2022, 09:55 PM

Gives it a nice deep tone and gives the car more character.

Rafiale02/20/2022, 07:57 PM

Just installed my axle-back today, honest opinion it sounds really good nearly as loud as what some people said I love it already, great exhaust for a daily driver.

Matt Chernitsky07/31/2021, 11:03 PM

I was hesitant at first, but this exhaust is a perfect fit for my style. It has a very mature, deep sound that quiets down at highway speeds. Deep rumbles on downshifts bring a smile to my face every time.

K. Molter06/04/2020, 07:19 PM

This is by far the best purchase I have made for my car. This, combined with the Short Ram Intake, gives the car this incredibly throaty and low growl that makes me grin every time I start the car, even though I've had it for months. It has such a nice non-ricer sound and cold starts are a thing to behold.

I could not recommend this product more.

Luke Sand01/06/2020, 12:22 PM

After doing quite a bit of research on which exhaust worked best for me I decided to go with the Corksport axle back and not only is it perfect but the guys at Corksport hooked me up. Originally the order was saying 4 weeks but they were able to get me one in about 4 days. I definitely love the low rumble of my exhaust and it doesn't drone on when your cruising down the road. I would absolutely recommend this product and the price fits the quality. Great Stuff!

William Ward06/29/2019, 09:54 AM

Build quality is incredible.l, Beautiful part. The team at Corksport are very good with Customer service, and kept me in the loop on every detail. That being said, the tone is nice, but is quite a bit quieter than I was hoping for. Maybe putting the mid pipe in with the axle back would make it a tad better.
Overall, I'm happy with this purchase, and will definitely order more from this company.

Kyle Bahm12/16/2018, 04:53 PM

This exhaust was exactly what I was looking for. I certainly didn't want a very loud fart sounding car. This gives it a very nice toned growl at low rpms. It certainly does not sound annoying. Should sound even better when you pair it with a short ram intake. Really glad I bought it.

Jesus Ochoa09/01/2018, 10:02 PM

This thing is definitely worth it. Great exhaust note at low rpm and no drone when cruising. Downshifting to overtake gives that nice rumble again until you get back to normal gear range.

Very professional/non-ricer sound. Installation was pretty quick (the rubber hangers were a pain but sitting on the side of the car (make sure the vehicle is stable on your jack stands) and pulling made it real easy. I utilized a jack stand to keep the old exhaust in place and later hold the new exhaust while reattaching the two rubber hangers.

Doc10/31/2016, 07:44 PM

Eventhough it took a month to receive the exhaust, it was worth the wait. Packaging was excellent. Instructions were very clear.

Installation was very easy. The only time consuming part was to take out the OEM exhaust from the hangers. After one was taken out, it was very easy to take out the other three. (Stick in a screwdriver between the metal and the rubber. Spray in some WD40, leave it for some time and then pry out the hanger from the exhaust support using the screwdriver)

The exhaust note was just what I wanted. Low bass grumble at low rpm. After 2500 rpm, sound dies down a bit and in 6th gear no droning at all. (Might be more noisy with the racepipe as well as on a 2.5L engine)

Rejosh John08/13/2016, 02:02 PM

Write a review

Do you ship to Australia?

Asked by Max | 08/14/2023, 03:36 AM | 1 answer(s)

Do I need a separate down pipe for this exhaust or would I use the factory install for this? Also, how would I go about making the tips carbon fiber (simply for the aesthetic appeal)?

Asked by Elizabeth Duenas | 03/12/2022, 11:14 AM | 1 answer(s)

Would there be a reputable place to buy this locally in southern ontario canada? (GTA region). I would like to avoid shipping costs if i can

Asked by Patrick | 11/22/2021, 09:52 AM | 1 answer(s)

Can you provide sound level comparison in db for the oem system and your axle back system across the room range?

Asked by Bunny | 03/08/2021, 07:01 PM | 1 answer(s)

Will you get HP from this or will you need to get the whole exhaust system to gain HP ?

Asked by Jason | 05/29/2020, 07:25 AM | 1 answer(s)

Les échappements que vous proposez sont t'ils compatibles avec une mazda 3 BM 2.2L ?

Asked by AUDY JEREMY | 01/01/2020, 12:01 PM | 1 answer(s)

Are the mounts for the sedan and the hatchback the same?

Asked by Ben | 09/11/2019, 08:54 PM | 1 answer(s)

What’s the dB rating on the Axle back Exhaust?

Asked by Jud | 01/20/2019, 11:19 AM | 0 answer(s)

Do you need a gasket for the axle back between the pipe and exhaust where they connect? my kit did not come with a gasket.

Asked by Mattew Morrison | 01/17/2019, 03:58 AM | 1 answer(s)

Is the axel back exhaust legal in New York?

Asked by Daniel Ocasio | 12/08/2018, 03:54 AM | 1 answer(s)

Where in Ottawa, Canada can i purchase this?

Asked by Momen Siam | 07/03/2018, 04:02 PM | 0 answer(s)

Will this fit a 2017 Touring 2.0L?

Asked by Nic | 01/18/2018, 10:26 AM | 1 answer(s)

How much does it weigh? (For shipping to another country propose)

Asked by Thomas seaman | 11/17/2017, 02:51 PM | 1 answer(s)

Is this model compatible with the 2017 GT?

Asked by Rejosh | 12/17/2016, 06:03 AM | 1 answer(s)

Will it fit on my 2016 mazda 3 1.5l?

Asked by Mario | 11/24/2016, 01:58 PM | 1 answer(s)

I have a rear diffuser that has hole cut-outs to have the exhaust stick out like the hatchback does on my sedan. Will the hatchback style exhaust fit at all on the sedan?

Asked by Baric Belanio | 09/12/2016, 11:47 AM | 1 answer(s)

By installing the Axle Back Exhaust only and not the mid pipe, will the factory warranty be void.

Asked by Rejosh John | 06/26/2016, 01:41 PM | 0 answer(s)

Does this replace the existing catalytic converter like with the cat back exhaust?

Asked by Cody Kwasniak | 04/06/2016, 02:10 PM | 1 answer(s)

Will this work on 2015 2.0L iSV model?

Asked by Ali | 01/11/2016, 06:09 PM | 2 answer(s)

estimated hp gain?

Asked by Steven Ferrero | 11/05/2015, 01:33 PM | 1 answer(s)

I have the Mazda 3 sedan with the factory ground effects kit...will this work? Will it melt the kit? Will it be seen?

Asked by Jeff Klancke | 09/29/2015, 08:10 PM | 1 answer(s)

Is there anyway to make the exhaust tips come out a bit more

Asked by ERNESTO perez | 09/20/2015, 08:47 PM | 1 answer(s)

Where on Vancouver Island Canada can I purchase this? Shipping from the US to Canada is crazy expesive.

Asked by aj | 09/03/2015, 09:24 PM | 1 answer(s)

If I order the axle back, can I order just the mid pipe at a later time? Or should I just wait and get the cat back?

Asked by Vincent Proulx | 07/19/2015, 09:34 PM | 1 answer(s)

How will this fare in Minnesota (wet, salty roads in the winter)? Also, why should I buy this exhaust instead of the Racing Beat axle-back exhaust for the Mazda 3 (link below)? Thanks a lot! http://www.racingbeat.com/Mazda-3/Cat-Back-Exhausts/71215.html

Asked by Andrew | 07/06/2015, 06:17 PM | 1 answer(s)

Will this fit on a 2.5L sedan? 2015?

Asked by Mike D | 03/16/2015, 10:36 PM | 1 answer(s)

Will this fit on a hatchback with the 2.0 liter engine

Asked by Mr. Cline | 02/19/2015, 06:56 PM | 1 answer(s)

will this give my sedan any performance gains?

Asked by Matthew | 02/05/2015, 11:54 PM | 1 answer(s)

Legal in California?

Asked by Justin | 02/05/2015, 10:40 AM | 1 answer(s)

whats the packaging size?

Asked by sam | 01/22/2015, 07:37 AM | 1 answer(s)

I have a 2014 Mazda 3 sedan 1.5 . Is the exhaust suitable for me?