We are excited to announce the release of the CorkSport Camber Plates for both the 4th GEN Mazda 3 and the 2020+ Mazda CX-30.
You likely already invested in our SRI and rear sway bar, but if you are looking to further enhance the driving characteristics of your Mazda, the CS Camber Plates are a great mod to add to your build. Whether you want to fine-tune your setup for the track or you are looking to upgrade to a more aggressive wheel and tire combo, the CorkSport Camber Plates will give you the extra adjustability needed. Continue on reading for more details on the CS Camber Plates.
The camber plates are designed to take the place of your factory strut top so that whether you are on lowering springs or factory springs, installation is quick and simple. For previous generation camber plate kits, it was required to cut the top of the strut tower to gain access to the camber plate to be able to adjust it while installed. This is not the case, however, for the 4th GEN Mazda 3 and CX-30! Making camber adjustments is easy and if they ever need to be removed, permanent modification was not required during installation. The Mazda 3 Camber Plates also feature a pillow-ball bearing that replaces the factory rubber mount and makes sure that the strut bar does not move excessively while driving in demanding situations.
Now let’s get to the amount of camber adjustment the CorkSport Camber Plates provide. On the Mazda 3 you can expect camber adjustment ranging from -2.4 to +0.9 degrees. There is a noticeable difference between the two, so if you are looking to fit a more aggressive wheel and tire combo the camber plates may help you achieve it without rubbing the paint off your fenders. The camber adjustment will also help if you plan on tracking your car or want to fine-tune your setup to your driving style on the backroads.
Finally, let’s go over the construction of the CorkSport Camber Plates. The camber plates feature a top and bottom plate. The top plate houses the adjustment slots for the lower plate and is made out of 6061-T6 aluminum that is then CNC machined. The lower plate features the pillow-ball bearing and is manufactured out of steel to provide the necessary strength needed to secure the strut in place so it does not move during hard driving. Also included with the CS Camber Plates is all the necessary hardware so you can get back out on the road to find your optimal camber setting quickly.
The CorkSport Camber Plates are a great mod to continue to enhance the handling performance of your Mazda 3 or CX-30 and also if want to build upon the aggressive appearance at the same time. Be sure to check out the website for additional photos and video on the camber plates and feel free to contact us with any questions you might have.
Connect with us
You may also like: