Description
One of the easiest and most beneficial performance enhancements you can do for your Mazdaspeed3 ,the Short Ram Air Intake replaces your factory airbox with an open intake system allowing more air into the intake chamber. The Mazdaspeed 3 Short Ram Performance Intake includes our precision machined MAF housing made from one piece of billet aluminum with included air straightener, durable dry flow air filter, and custom reinforced silicone connector. In initial testing, the Mazdaspeed 3 Short Ram Intake netted peak gains of +12HP and +17 lb torque.
Read The BlogProduct Release! Corksport Stage One Power Series Short Ram Intake for Mazdaspeed 3
- Prevent air leaks and inaccurate readings that can cause check-engine lights: The MAF housing is precision machined from billet aluminum with included air straightener.
- Durable Dry Flow Air Filter: Reusable and water resistant, this unique non-woven filter media does not require oil to filter and trap dirt and actually sheds dirt under engine vibration unlike cotton-gauze which holds contaminates until you clean the filter
- Custom reinforced silicone connector constructed with multi-layer nylon braid to provide more strength and power and a smooth internal transition for less turbulence and optimal flow
- Stainless steel T-bolt clamps: Comes with polished stainless and ensure an airtight seal which prevents unmetered airflow
- For the best value on the market
- Corksport Service and Support: Receive a two-year warranty, full-color installation instructions, all of the needed installation hardware, and knowledgeable telephone installation support
How To Install the Mazdaspeed 3 Short Ram Intake.
It will take you Approx. 1 hour to install.
1 hour Install Time
2/5 Difficulty
2-Year Warranty
No CEL
Reviews
Rafael Raas
Bought this in February 2015, you really can tell the difference alongside with the Bypass Valve. Keep up the good products.
AJ Popowski
Just installed the stage 1 sri today. Went smoothly and WOW! Started the car for the first time and could really hear all the air being sucked in by the intake. Took it for a quick spin and now you can audibly hear the turbo spool and stock bpv. Highly recommend this intake to anyone.
Griffin
This was my first modification to my 2012 Speed3. I had so little mechanical experience I had to buy the hand tools to put this on, and apart from some tight space taking off the stock intake, installation was pretty straightforward. Personally, I think this is worth the price for the sound alone. Hearing the car hiss and breathe when the turbo spools up is awesome. It's loud enough to hear with windows up on the freeway above 0 psi boost, but not so loud that it'll piss off your neighbors. I've seen no change in mileage in the 2 months I've had it installed. My butt dyno can't feel the claimed 12 hp / 17 lb-ft torque gain. I can feel less pull between 2500-3000 rpm while boost builds more slowly, which is a little disappointing. However, I compared telemetry data from track days at Willow Springs from stock to after I installed the SRI, and the acceleration is slightly better, getting me to 120 mph vs 117 mph on the back straight. Not huge differences, but that could align with 12hp. I could share the graph, but this won't let me post pictures. Stop procrastinating by reading reviews, just suck it up and buy it. The only thing you might regret is not shelling out for stage II.
Andrew Arena
This was my first upgrade to a 2010 Mazdaspeed3. I purchased the intake in 2014. After almost 3 years, this intake still functions perfectly and continues to help make the car a joy to drive. No CELs, no problems whatsoever. The part itself still looks as good as it did when I removed it from the box. Install took about 30-45 minutes and the instructions were clear and concise. All of the parts fit perfectly. The most noticeable difference is the sound - spirited driving reveals a very audible hissing noise as air enters the intake. The high-pitched whine of the turbo is also more noticeable than before. Highly recommended.
Tony
Love this product. the "whoosh" noise is addicting. they didn't have the color I wanted but they included some hp adding stickers and a nice letter. butt dyno noticed a slight power diff.
Nick Adam
Recently installed this piece on my GenJuan, loving it so far! Improved the sound over the Mazdaspeed/AEM CAI that had been pre-installed when I purchased the car. Only thing to note is that if you, like me, do not have the factory airbox elbow, you will need to find an adapter for the breather hose, as the CS SRI relies on you being able to remove and transfer this small piece from the factory setup. I worked around it by altogether replacing the factory plastic breather tube with some flexible heater hose and a couple of generic fittings (3/4" to 5/8") from the parts store.
Adam
Bought the stage 1 intake. So far it's been great, car no longer falls flat at 5.8k and let's you easily hear the bpv. Awesome product will definitely be buying more from corksport. My only regret is I didn't go for the stage 2.
RICARDO LOPEZ
I have a 2012 Mazda 3i touring skyactiv I love the intake and love how it looks and feels but lately it has been making this weird noise when I start accelerating and feels like it takes power out of the car please help me!!
Devin harron
Does this stage 1 SRI throw check engine light without ap or tune?
Edgar
Easy to install and good quality, it's been 8 months and zero problems.
- Silicone Tubing Color
- Black
- MAF Color
- Black
- Filter Color
- Blue
- Clamp Color
- Polished