Description
H11 Fog Light Bulbs
Add a functional modern style to your Mazda or Mazdaspeed with the CorkSport LED Fog Lighting Kit. The H11 Fog light bulbs are a direct fit for most Mazda models with standard fog lights. With an output similar to that of most HID light kits in the 6000k color range, the CorkSport LED Fog Light kit replaces the incandescent fog lights with the modern sleek look of white LED lights with a hint of blue.
What's In The Kit?
The CorkSport LED Fog Light Kit for Mazdas includes two bulbs, each with 38 LEDs. The bulbs are a direct plug-in fit for factory fog lights. Your kit will also include instructions on how to access your Mazdas fog lights.
Color Range
Each bulb in the fog light kit is in the 6000k range, which creates a white light with a hint of CorkSport blue. If you're looking for a true daylight color from your fog lights, the 6000k color will be a perfect addition to your setup.
Easy Installation
All CorkSport products come complete with easy-to-follow installation instructions. Our H11 Fog Light Bulbs plug directly into the factory mount, for one of the simplest installations that you will find. You will NOT need to cut wires, add adapters, etc.
Lower Heat Generation
LED’s have a lower power draw than halogen bulbs, and ultimately generate less heat. In the process they are able to last up to 15x longer than a standard halogen bulb, making them an incredible bang for your buck.
- Compatible with:
- 2004 - 2016 Mazda 3
- 2007 - 2013 Mazdaspeed 3
- 2006 - 2007 Mazdaspeed 6
- 2004 - 2018 Mazda 6
- 2011 - 2014 Mazda 2
- 2006 - 2010 Mazda 5
- 2004 - 2011 Mazda RX-8
- 2012 - 2016 Mazda CX-5
- 2007 - 2011 Mazda CX-7
- Designed in America: Designed in Vancouver, Washington, in the Pacific Northwest.
- CorkSport Service & Support:full-color installation instructions, all necessary components, and knowledgeable telephone support at (360) 260-2675.
How To Install Your CorkSport Fog Light Upgrade
It will take you 1 hour to install the CorkSport Fog Light Upgrade with our easy-to-use instructions.
1 Hour Install Time
1/5 Difficulty
No CEL
Reviews
Dominick
Will they fit the 2010/11, Mazda3 gt foglights? ** Yes they will fit **
Jeremy Lyczewski
I had such a hard time finding HID's or LED's for my 2011 MS3's fog lights because they needed to be so short. Thank you again Corksport for having the right part for the job. They match my 8000k 55 watt HID's in my low beams perfectly. Super fast shipping as usual.
Roy Medley
I just put a set of these in my Fog's..alittle to much on the Blue side, but they still look good. I have noticed that they tend to build up alittle fog on the inside of the lense when using them in the cold weather...Im thinking its because they run cooler than the stocks and don't build up enough heat to disipate the moisture.
Jason Pantano
These fog lights are awesome! Easy install 10 min through the wheel well. Fastest shipping i have ever seen. I ordered these on a Wednesday and they were here Friday considering i am on the other side of the country. Keep it up Corksport
Nelson
I bought these to replace the halogen bulbs in my MS6's fog lights. The output is slightly more blue than the HID low beams and not quite as bright as the old halogens. They do look great though! Next I need to upgrade the rest of the lights to LEDs!
Cezary Koral
These are awesome, my only gripe is that with my stock HIDs on the 2011 Speed3, the Fogs have a slightly higher light output 6-7K vs 4.5-5k leaving the fogs looking slightly more blue the HIDs... but i love em regardless, now i wanna upgrade the front lights next to the projectors :D
Thom
Great product. looks 10x better than stock. took me 15min to install them even though getting to them is a little tricky, but def doable. Very easy to do. Looks awesome.
Mark
These are great and more efficient way than HIDs for your fog lights. I would recommend this product to any Mazda owner. *TIP* To install: Go through the wheel well. Turn your wheels and undo the 3 phillips screws connecting the plastic to your fender. Bend it back just enough to get your arm in, and you'll be able to see the driver side fog lamp. For the passenger side, you'll do the same except you won't be able to see the fog lamp. You'll have to reach in there and feel it out. Reach in and look and look from the front to insert the DRL bulb in the socket.
Nathan
I just bought a pair of these for my 2010 MS3 fog lights. They are a nice match to my 6000K HID low beams and CS LED interior and LP light kit. Though the light output isn't as high as HIDs, they put out more light than I expected. They are listed as DRLs, so I was mainly buying them to match my HIDs. I am completely satisfied with them, and would recommend them to anyone.
- Car Model
- 2014-2016 Mazda 3