Mazda LED Fog Light Replacement Bulbs
Description
H11 Fog Light Bulbs
Add a functional modern style to your Mazda or Mazdaspeed with the CorkSport LED Fog Lighting Kit. The H11 Fog light bulbs are a direct fit for most Mazda models with standard fog lights. With an output similar to that of most HID light kits in the 6000k color range, the CorkSport LED Fog Light kit replaces the incandescent fog lights with the modern sleek look of white LED lights with a hint of blue.
What's In The Kit?
The CorkSport LED Fog Light Kit for Mazdas includes two bulbs, each with 38 LEDs. The bulbs are a direct plug-in fit for factory fog lights. Your kit will also include instructions on how to access your Mazdas fog lights.
Color Range
Each bulb in the fog light kit is in the 6000k range, which creates a white light with a hint of CorkSport blue. If you're looking for a true daylight color from your fog lights, the 6000k color will be a perfect addition to your setup.
Easy Installation
All CorkSport products come complete with easy-to-follow installation instructions. Our H11 Fog Light Bulbs plug directly into the factory mount, for one of the simplest installations that you will find. You will NOT need to cut wires, add adapters, etc.
Lower Heat Generation
LED’s have a lower power draw than halogen bulbs, and ultimately generate less heat. In the process they are able to last up to 15x longer than a standard halogen bulb, making them an incredible bang for your buck.
- Compatible with:
- 2004 - 2016 Mazda 3
- 2007 - 2013 Mazdaspeed 3
- 2006 - 2007 Mazdaspeed 6
- 2004 - 2018 Mazda 6
- 2011 - 2014 Mazda 2
- 2006 - 2010 Mazda 5
- 2004 - 2011 Mazda RX-8
- 2012 - 2016 Mazda CX-5
- 2007 - 2011 Mazda CX-7
- Designed in America: Designed in Vancouver, Washington, in the Pacific Northwest.
- CorkSport Service & Support:full-color installation instructions, all necessary components, and knowledgeable telephone support at (360) 260-2675.
How To Install Your CorkSport Fog Light Upgrade
It will take you 1 hour to install the CorkSport Fog Light Upgrade with our easy-to-use instructions.
1 Hour Install Time
1/5 Difficulty
No CEL
Reviews
Jeff Shugg
Disappointed with these. Provide less light than stock. Can hardly tell they are on.
Kris
Are these socket type H11 >>CorkSport Reply: It depends on which model of car you choose. Mazdas use H11s and 9006 style bulbs.
Nigel Krajacic
Got these installed on my 2011 Mazda 3 GT, there are way better then the OEM fog light bulbs for sure, install took no longer then 5min on each side, match my headlights thank you.
Yanis
Got these for my Mazda2 Touring, I have PIAA H4 extrem white bulbs for my headlamps. The PIAA don't match the LED HID color but they are bright. Lights up sings and road lines perfectly.
Mitchell Swift
These look great! I don't have the stock HID's, so I have Silver Stars for my head lights and high beams. These have the whitish blue LED coloring I've come to expect, and they're brighter than my head lights now! It made me laugh, but they're great! Super fast shipping and an easy install!
Doug
Gives a matching look to the headlights and that I love. They dont add much light near as I can tell so far; Finsihed the install today and went for a quick putt. The directions said no tools which is not true. Had to remove wheel well cover and front splash guards to access the bulbs. Also my car has a retaining ring (which is the lock mechanism where you "twist clockwise" to lock the bulb ) had to be loosened becuase the bulbs would not twist and lock in otherwise. What should have been plug and play came with a lot more hassle to install. But I'm still pleased with the end result. Would have rateed it higher except the directions mention no tools needed (-1/2) and no mention of the locking ring (-1/2). Now...if Corksport would just make that CARB certified air intake for our Mazda3's I would be a happy camper.
Marsh
Absolutely amazing addition to my Mazda3! The LED's match the HID headlights perfectly. Worth ever penny! For installation on 2010-2012 Mazda3, turn the wheel all the way to the left (for passenger side) or all the way to the right (for drivers side), use a phillips screwdriver to take out the 3 plastic screws that secure the plastic wheel well. Use the screwdriver tip to pop out the 3 plastic washers, then just pull back the wheel well enough to put your arm into the space. Make sure to push the tab on the blue wire housing to unplug the current bulb, and then twist counterclockwise to remove the bulb. Then just put the new bulb in and reconnect the wires. Super easy install! Only took an extra 10 minutes to figure how to open up the wheel well (due to the plastic washers/tabs). Thanks corksport!
John Barrett
Great replacement to the stock yellow bulbs, they are much more efficient and look significantly better! They are slightly more blue than the stock HIDs on my 07 MS3 GT, but it's barely noticeable. INSTALLATION for 1st Gen MS3: (I'm merely adding to & correcting Mark's review/install instructions because the CorkSport supplied instructions are utterly useless) Turn your wheel all the way and undo the 2 phillips screws connecting the black plastic to the fender infront of the wheel. Bend it back just enough to get your arm in (I recommend wrapping a towel around your arm because i cut my arm up pretty bad reaching in there), and you'll be able to see the passenger side fog lamp with a flashlight. Unclip the bulb, turn it to the right and pull out, do not force it, just jiggle. Then place the new bulb in, slightly turned to the right (same position you removed the stock bulb in). This requires patience because it can be hard to line it up correctly. Plug it back in and test it before returning the 2 screws. For the drivers side, you'll do the same except you won't be able to see the fog lamp due to a piece of plastic. You'll have to reach under the blocking piece of plastic there and feel where the bulb is and repeat above steps. Took me 10 mins to figure out!
Chad Geiger
Again, another easy install to differentiate your Speed 3 from the others out there. I cannot say enough about how good these look. I am thrilled about how my car is coming along. Thanks again for the continued quality in your product and services.
Adrian
What is the warranty of them? Thanks.
New features
- Manufacturer
- Stock