Description
Race Rear Motor Mount for the Mazda 3 and Mazdaspeed 3
Get improved handling and road feel while maintaining a comfortable ride with the CorkSport Rear Motor Mount for Mazda 3/Mazdaspeed 3. Designed as a direct OEM replacement, the CorkSport Mazdaspeed 3 Rear Motor Mount maintains OEM fitment while adding a large urethane thrust surface for added stiffness and improved driver responsiveness. CNC machined from billet aluminum and hard anodized black with the stylish CorkSport logo this mount is the new leader in quality and design.
Perfect Feel
95A durometer urethane for a smooth ride, minimal vibration, and a huge decrease in engine movement.
Large Thrust Surface
for reduced vibration versus other aftermarket motor mounts.
Black Anodized Finish
for a durable, lasting finish. Aluminum is rust and corrosion-resistant for longer-lasting strength when compared to rusted steel.
Race Fitment
Designed as an upgraded replacement with worry-free install
- In some cases, if the stock mount attached to the engine is worn or damaged, this product could contact the stock mount under heavy acceleration.
- NVH (noise, vibration and harshness) in automatic transmission vehicles is heightened more than manual transmissions. Customers with automatic transmissions may find the NVH unsuitable.
- Compatible with:Mazdaspeed 3, FWD Mazda 3
- Designed & Developed in America: CorkSport Mazda Performance is resides in Vancouver, Washington and is located in the beautiful Pacific Northwest.
- CorkSport Service & Support: 2 year limited warranty, full color installation instructions, all necessary components, and knowledgeable telephone support at (360) 260-2675.
How To Install the Race Rear Motor Mount
It will take you 1 hour to install the CorkSport Rear Motor Mount with our easy-to-use instructions.
1 Hour Install Time
2/5 Difficulty
2-Year Warranty
No CEL
Reviews
Kevin S
I like this mount a lot - big improvement in solid pull while accelerating from the OEM unit. It is a bit rough at idle, especially when the A/C is on. Luckily I had read the reviews before installing or I would not have been prepared for the initial vibration level which is VERY harsh at all RPMs. After a few hundred miles it settled down as other reviewers state. Installation was fairly straightforward and it appears well built. This is a good upgrade. I also installed the shifter bushings and the two upgrades really improved shift feel and solid feel while accelerating.
D. Williamson
I bought this nearly a year ago and have since removed it because of excess noise from vibration. Maybe vibration isn't the best word to describe it, more of a banging noise. And it's not a confidence ensuring noise. What I'm talking about occurs mainly occurs when AC cycles on - it was as if there was too much clearance somewhere in the mount and what I heard was the result of .01-0.03 inches of travel. That's not quite inaccurate either. The difference inner diameter of the sleeve in my mount and M12 major diameter was over .005 inches, where I would have expected a RC6 Engineering Fit or tighter. If you experience this, try buying a 12mm ID, 19mm OD, 45mm long SSTL Bushing from McMasterCarr. I'm going to give that a shot. Other than that movement and resulting noise, I like the increased stiffness and throttle response. I'm on the fence about recommendation until I could verify a tighter bushing fit would eliminate shortcomings.
Joe Minichiello
Woah This should the first upgrade on your Mazda. Installed it in Feb 2018. Took a bit longer to break in maybe due to cold weather. Upgrade was immediately noticeable with eliminated torq steer especially on slippery snow slush. I was driving with Hankook i-Cept Evo2 ...but did notice more slip before upgrade. Traction feels solid and smooth...Luv the extra engine noise
michael hall
Installed this on my 2013 MS3 and works great! It has a little more vibration but it is getting better the more I drive it. I had the CP-e stage 2 Rear engine mount before this one and the vibrations were overwhelming and never changed after 1000 miles of driving. Don't buy the CP-e mount if you don't like vibrations. The corksport stage 1 does all the things the CP-e mount does without all the vibrations! Great part and easy to install!
Jay
Wow! So I bought this after riding in my buddies CooperS with high expectations. First of all, I hadn’t been under my car yet and I found out I had a Cobb RMM. Corksport totaly crushes them, this mount is absolutely amazing. Gear shifts are way smoother, torque steer is almost completely gone (you’re actually in control). This is my third upgrade from Corksport and there will be many more to follow. Buy this!
Tim S
Major improvements to driveability! 2011 2.5 manual. Give it a few 100 miles to break in and any harshness will be gone. Only con that remains is minor vibration when the air compressor kicks on and car is stopped. Vibration is not noticeable once driving again. This beautiful upgrade cuts engine movement, making hard accelerations and shifts much smoother! Other mounts out there are known for being too harsh, being designed for the race track. CS hits the mark with this one!
Teun Ootes
this mount makes my speed 3 great to drive with! high quality!
Paul Garay
Bought the mount a couple of weeks ago. Looks very well made and it was very easy to install. I had the corksport inserts but I wanted to give the full mount a try. Awesome results! I dont feel the engine moving during gear changes, the car feels more responsive and the shifts feel smoother. I drive a 2010 Mazda 5 with the 5 soeed manual and this mount fits no problem.
Andrew
Definitely the first upgrade that should be done on the Mazdaspeed3 for performance. Just like many others I'm not one to believe the hype in a modification before doing some research of my own and learning about the pros and cons, but believe me when I say just get this. You will not be disappointed, the pros FAR outweigh the cons! The install was easy, would be almost effortless on a hoist. So far I have done around 1000km of mixed driving on the 80 Duro (black insert) mount and I can say first hand it makes the car launch a lot harder with little to no wheel hop or noticeable drivetrain movement. Shifts are way smoother and tighter and I no longer hear/feel the drivetrain moving around when shifting, and best of all it pretty much eliminated torque steer in my otherwise stock '12 Speed3. I would not be surprised if all these drivability improvements shaved some time off of the cars 0-60 and handling numbers just due to the car being more capable of putting the power down. As for NVH there was a increase after installation as expected, but give the mount some time to seat and "break in" and within 150-300km 90% of the added NVH will disappear. I notice a slight vibration when idling warm below 800rpm give or take, and a slight rumble on cold start-up, other than that it is comparable to the OEM mount. Corksport nailed this mount! I haven't tried other manufacturers' RMM's but so far I am Glad I went for CS over the others on the market.
Chris Rummel
This mount should be the first thing you buy for your Mazda 3 and definitely if you upgrade to a short shifter. You will notice immediately the difference in shifting and transfer of power to the ground after installing. Takes about 100 miles or so to break in after that you only notice extra vibration on start up.
New features
- Manufacturer
- Stock