Description
CONFIRMED: The CorkSport Axle Back Exhaust fits and sounds fantastic on the 2019+ Mazda 3 & CX30 2.0L engines!
Mazda made some big improvements to the quality of the 4th GEN Mazda3 and one area that stands out in particular is the improvements to road noise. This is fantastic when cruising on the highway, but there’s one area that is just too quiet: exhaust. Luckily we have just the fix with the CorkSport Axle-Back Exhaust for 2019+ Mazda 3 & CX-30 2.5L & 2.0L. Add some needed excitement to your Mazda 3 by adding some character to your exhaust note. Loud enough to enjoy during aggressive driving, but quiet for cruising and the daily commute. Check out the video for sound clips and read on for full details!#ZoomZoom!
Read The BlogAxle Back Exhaust for 2019+ Mazda 3 & CX-30!
The CorkSport Advantage
Performance Sound:
The CorkSport ABE replaces the restrictive OEM muffler section with a high flow, pass-thru resonator that provides volume when you want it, but minimizes drone and excess noise when cruising. The GEN4 Mazda 3 axle back is an atypical design with an offset inlet flange. This led us to use a single, long resonator on one side. We even tested different resonator combinations and found the single resonator to be the best combination of great tone plus drone elimination. Be sure to check out the product video for sound clips!
Bolt-On Power:
The CS Axleback exhaust also ensures your 3 is not all bark and no bite. We increased the exhaust diameter from 50-55mm (depending on where you measure) up to 63.5mm. This diameter increase combined with removing the restrictive OEM muffler really helps your Sky-G breathe better. Dyno testing in a controlled and repeatable setup showed gains of 3-5wHP & 2-3wTQ across the RPM range. While not a huge number we are happy to see a gain and expect more when the CorkSport Mid-Pipes are also installed (coming soon!).
Appearance Boost:
We did not forget about appearance. The rear end of the 4th Gens are let down by the too-small OEM exhaust tips. We increased their size up to 90mm to fill out the bumper cutouts. The CorkSport Exhaust uses a dual wall, slant cut design that is rotated to help match the curve of the OEM bumper. As a finishing touch, laser-engraved CorkSport name badges are added to really set off the look.
Personalized Look:
For the new Mazda 3 we also incorporated a new feature into the CS exhaust: tip length adjustment. Each tip is attached with a slip fitting and an exhaust band clamp that has proven not to leak or loosen up in use. This gives you up to 10mm of length adjustment to dial in your preference. That’s not all though. We have three different tip options to choose from: Mazda 3 Hatchback, Mazda 3 Hatch with Appearance Kit, Mazda 3 Sedan and the new CX-30.
Model Specific Design:
We specifically designed two different length tips for the Mazda 3 Hatchback due to the design of the Mazda Appearance Package. The rear bumper skirt adds a lot of length to the car…hiding the tips from view. With the Appearance Package-specific design, the tips are prominent in the rear bumper skirt as they should be. (The Hatchback Appearance Package tips are 45mm longer than standard Hatchback tips).
Materials & Manufacturing:
Each CorkSport ABE is made from fully polished, mandrel bent, 304 stainless steel. This gives a great look that will stand up to the test of time. To ensure strength, each joint is TIG welded and the inlet flange is laser cut for optimum fitment. Each exhaust comes with all hardware needed for installation and we even provide full-color installation instructions!
- NVH (noise, vibration and harshness) in the cabin of your vehicle will be increased by the installation of this exhaust. We highly recommend you view the above video to hear the exhaust note inside and outside the vehicle.
- Not confirmed to work with Skyactiv X engine. Use at your own risk.
Additional Features
- Vehicle Fitment: 2019+ Mazda 3 & CX-30 in both 2.0L/2.5L & AWD/FWD & Manual/Automatic Drivetrains (Tip Options for: Hatchback, Hatchback w/Appearance Kit, Sedan & CX-30) ***Fitment NOT confirmed on Skyactiv X. ***
- Designed & Developed in America: Designed, tested, and validated in Vancouver, Washington, in the Pacific Northwest.
- CorkSport Service & Support: 2-year limited warranty, full-color installation instructions, all necessary components, and knowledgeable telephone support at (360) 260-2675.
How To Install The Mazda 3 Performance Exhaust
It will take you two hours to install the CorkSport 4th Gen Mazda 3 Exhaust with our easy-to-use instructions.
2 Hour Install Time
1/5 Difficulty
2-Year Warranty
No CEL
Reviews
Jean Mercier
very good quality and the sound is great a game changer for the turbo
Keith Carilli
Fast Shipping, No drone, louder then OEM muffler, and not sure if I trust the clamps that holds the tips on. Over all a MUST buy!
Mark
I ordered this axle back exhaust on a Sunday and it was my house by Tuesday with standard shipping. I had it installed the next day and it is everything I wanted in an exhaust system. Nice deep mellow tone that is not overbearing inside the CX-30 I had it installed on. Exactly as advertised! The Youtube videos were spot on. Get it.... you will not be disappointed!
Alex Kozan
Amazing I love it I’m obsessed. Really gives your Mazda a great sound. Take a video of you starting it after you get it installed…..you won’t be disappointed
Aiden Tasse
Paired with the corksport air intake makes a huge deffernce in how the car sound 10 out 10 for me!
Brian Thiem
If you are looking for a bit more noise to enjoy the car. get this axel back and the Corksport intake and enjoy more engine noise and turbo noise!
Jim Davis
I've had this beautifully made exhaust hanging on the wall in my shop for a year now, having taken it off my car because it is too loud for me. the drone inside the car is very loud under load. I contacted Corksport but they were unable to offer a solution. My car is NA. I suspect this exhaust might be great for turbo applications, but I'd recommend thinking hard about an NA car. It's too nice for me to toss and too loud for me to use. In contrast, I have a full a/m exhaust on my Mazdaspeed Miata and love it. It's mellow, burbles, makes great noises, and doesn't drone at all. My offer to Corksport: I'll be your guinea pig. I'll deliver the exhaust to you in Vancouver if you'd be willing to rework the open pipe with a small muffler and get it back to me.
Madison DeGarmo
The first mod I picked up for my 3 was the CorkSport Axle Back! At the time, I was looking for an exhaust that would make my car more enjoyable to drive, but wouldn’t be overbearing on my long road trips. Since installing, it’s met all of my expectations and more! It provides that perfect cold start and sound during acceleration that you’re looking for, yet is as quiet as stock while driving at a steady pace on the highway. Installation was simple and straight to the point. If you want to smile every time you drive your 3, I’d highly recommend the Axle Back!
Jason
Loving this exhaust on my '23 NA MT6 hatch. It sounds great without being obnoxious and just makes the car so much more engaging to drive.
Eric Toth
Great fit and finish, easy to install sounds great inside and outside car. Not too loud for your daily driver.
- Select Vehicle Model
- Sedan