Description
For Mazda 6 aftermarket performance parts, the CorkSport Turbo Boost Tube can help your car acheive higher boost, and better reliability. The boost tube also fits on the Mazda CX-5 and CX-9. Through testing, we found that the stock 1-ply rubber boost tube expands and contracts at stock power levels, which is less than ideal. No worry, the CorkSport upgraded 5-ply reinforced silicone hose is much stronger and stops unwanted expansion from your turbo Mazda boost pressure which eliminates a potential failure down the road whether your car is stock or modified.
Performance Inspired
The CorkSport Performance Boost Tube Upgrade for the Mazda 2.5T engine is made to give you the most out of your car at an affordable price. The OEM tube expands 12% at 20psi (peak pressure we have seen at intercooler outlet) when cold, and even more when heated up by the engine due to the use of flexible rubber with 1 layer of reinforcement. This expansion robs your car of consistent boost levels and hurts throttle response. The CS boost tube expands 3x less than OEM when cold and will stay consistently strong at higher temps and elevated boost levels due to its high temp silicone and 5-layers of reinforcement.
Future Proof Your Ride
The stock Mazda boost tube for the 2.5t engine is made from very similar, if not the same material, as the OEM Mazdaspeed boost tubes which were prone to cracking & failure as they age. It’s easy to see the 2.5T having much of the same problem down the road, causing boost leaks and a poorly running car. The CorkSport boost tube eliminates this issue as silicone is longer lasting, stronger, and more resistant to the elements than regular rubber. If this is the first mod in your build, the CS boost tube is ready for elevated boost levels that could otherwise cause the OEM tube to fail prematurely.
Quality Hardware
Each CorkSport Performance Boost Tube comes with upgraded T-bolt clamps. They offer more secure clamping than the OEM worm gear style clamps and a wider clamping area to ensure a good seal. Plus, they are made from polished stainless steel for a great look and high corrosion resistance.
- Compatible with: 2016+ Mazda CX-9 & 2018+ Mazda 6 equipped with the 2.5L Turbo SkyActiv-G
- Designed in America: in Vancouver, Washington, in the Pacific Northwest.
- CorkSport Service & Support: 2 year limited warranty, full color installation instructions, all necessary components, and knowledgeable telephone support at (360) 260-2675.
- NOTICE: The boost tube does not work with our FMIC kit or Intercooler Piping Kit! If you plan on getting those parts in the future skip the boost tube.
How To Install Your CorkSport 2018+ Mazda6 2.5L Turbo Boost Tube
It will take you one hour to install the CorkSport Mazda6 Turbo Boost Tube with our easy-to-use instructions.
Check Out the Blogs Related to this Product!
OEM Cold Side Breakdown
Full System OEM Breakdown
Boost Tube Testing
1 Hour Install Time
2/5 Difficulty
2-Year Warranty
No CEL
Reviews
Mike
Installed this boost tube just over a week ago. You can hear turbo a lil more and over all a bit louder engine when giving medium or more throttle. I found install very easy if you lift up car a little. Stock tube easy off, even when bolts are facing the best direction its still easy. I have thick hands and big arms too. Cs tube easy on as well. Just make sure both ends of tube are snugged right up where they go. Worst part for me is the damn under body plastic & all the screws n clips. Do it all from underneath and tighten clamps good not hard as you can but tight n your gtg.
Anders Bang
The bottom end here can be tricky to get on here. Do make sure you get those hose clamps tight correctly - or this will come off under pressure. It is hard to tell if it did anything power wise, but the quality of this is far superior to the oem hose.
Tom
Just received my boost tube from CS and I can say that the throttle response is a lot more snappy & responsive, installing it was a breeze but removing the OE was a pain, of the way they had the clamps on.
Troy
I already had the intake and axle back exhaust and decided to try this. I noticed a big difference in throttle response and turbo lag is nearly unnoticed now. The stock tube was a bit challenging to remove, but the install of the CS was simple. Because of the reviews saying it popped off, I've had the tools and clamps with me just in case but have had no issues. It's also great to really hear the turbo!
Art
Installed along with the Turbo Intake combo. The intake install was w/o issue. The boost tube popped off under first test drive (another reviewer had the same issue) so we replaced the supplied clamp with one from the shop and tightened as much as possible (minus 1 star). Appears to be holding after a second test drive on the highway etc. Lovely extra boost kick and turbo noises. Next up CS split cat exhaust then FAB 9 Tune!
Jay
Noticeable improvement overtaking in higher gears as it doesn't flex as much while holding boost, over stock. Acceleration feels more aggressive and doesn't lose pressure as much as oem when shifting through the gears in higher rpm's. Installed on a 21.5 CX5 Turbo from the top..it's doable unless you have big hands or a bad back. The bolts to remove are easier to remove than I expected by other reviews, just had to use both hands to support the ratchet at times. FYI make sure you tighten the new clamps a lot! I thought I did..checked it after a short drive and it almost came off.
Alain
Installed in my 2019 cx9. Preferably replace it from underneath the car because of the clamp in the throttlebody and removing the stock tube. More responsive in lower gear acceleration. BOV engages as low as 2k rpm instead of 3.5-4.5k rpm with the stock tube.
Tyson Carver
Kind of a pain to uninstall the oem one because the clamps are in terrible positions, but installing the corksport one was a lot easier comparatively. A lot better quality, and a bit bigger diameter also. Right off the bat I notice a lot better throttle response off the line. Almost eliminates the turbo lag, which honestly stock it a pretty long turbo lag so this is a great upgrade. I can’t wait to install my Ram intake and Axle Back exhaust as well!
Kevin
Great quality product. As in previous reviews the clamp by the throttle body was almost impossible to get to, so a tip for you all...if you have access to a hoist it only took about 15-20 minutes to install from underneath. Extremely easy access and lots of space for your hands.
Eric Blumensaadt
I have to say this CS boot tube really DOES give me better throttle response, both at standing start tip-in and for passing. I'm impressed!
- Clamp Color
- Polished Clamps