Description
Enjoying your CX-3 but looking for a little extra sportiness? Look no further than the CorkSport CX-3 Axle-Back Exhaust. Fully polished 60.5mm stainless steel piping, high flow resonators, and dual wall 90mm tips ensure your CX-3 looks and sounds as good as it drives.
Check out the details down below for full info and don’t miss the video to hear what your CX-3 could sound like in as little as 30 minutes.
The CorkSport Advantage
Design Focus
The CorkSport CX-3 Axle-Back Exhaust is designed to be an improvement to the OEM exhaust’s sound and look. Larger diameter piping and high flow resonators combine to create a deep sound that is free of drone or buzz. It’s louder than OE but not drastically so, to give you sound when you want it but quiet when you don't. The OEM exhaust tips look tiny in the bumper cutouts so we upgraded to 90mm slant cut tips. The tips were extended slightly as well to really accent the clean look of the CX-3.
Materials and Manufacturing
Like all CorkSport exhausts, the CX-3 axle back is made completely out of fully polished T-304 stainless steel. 60.5mm CNC mandrel bent piping is combined with 90mm dual wall tips, high flow resonators, and 11mm thick laser cut flanges to ensure high flow, great fitment, and durability that will last a lifetime. Everything is brought together with precision TIG welds and finished off with a laser etched CorkSport badge on the tips.
Upgraded Exhaust Flow
The piping was upgraded from 50mm diameter to 60.5mm diameter. Combining this with flow-through resonators instead of the large multichambered OEM muffler creates much better exhaust flow through the axle back section.
Additional Features
- Vehicle Fitment:2016+ Mazda CX-3 AWD. Will not fit FWD models.
- Designed in America: Designed and tested in Vancouver, Washington, in the Pacific Northwest.
- CorkSport Service & Support: 2-year limited warranty, full-color installation instructions, all necessary components, and knowledgeable telephone support at (360) 260-2675.
Advisory
NVH (noise, vibration and harshness) in the cabin of your vehicle will be slightly increased by the installation of this exhaust.
How To Install Your CorkSport 2016+ Mazda CX-3 Axle Back Exhaust
It will take you three hours to install the CorkSport CX3 Axle-back Exhaust with our easy-to-use instructions.
1 Hour Install Time
2/5 Difficulty
2-Year Warranty
No CEL
Reviews
Xavier
I got this axle-back exhaust around 2 months ago. When I first installed it, I immediately heard the difference in sound. It is a subtle yet very defined sound. It had a deeper sound and has a nice growl to it. It sounds really good between 2000 rpm - 2500 rpm on lower gears. The installation process was fairly easy, as it is just bolt on. Taking off the stock muffler was more of a challenge because of how rusted the bolts were, and it was a bit difficult to get the right angle because the muffler sticks out a bit. After spraying so much WD40 I was finally able to crack the bolts. Overall, this exhaust weighs so much less than the stock muffler, stock muffler most likely requiring 2 people, while this muffler can easily be held by 1 person. The sound is amazing, there have been no leaks at all, and the look of the tips fit the car so well. 1 piece of criticism or just my opinion would be to make the tips larger so they stick out and fill in the gaps better. Thank you, Corksport! (add more aftermarket parts for the CX-3 ????)
Sam Laubscher
Easy to install, took more time to take the stock exhaust off than it did to install the CorkSport one. Really nice deep tone with no annoying drone at all! I can also keep it quiet driving through my neighborhood Exhaust tips look clean and suit the car so well. Very happy Thanks CorkSport for making this product for our under-appreciated CX-3s!
James Matthew Wells
It's installed. It went really easy and the only thing I did different is that I put polyurethane exhaust mounts where the factory rubber ones would have went. I did this because with an aftermarket exhaust there's only two rubbers holding it in the back and that actually holds up most of the middle of the exhaust going under the car too. Polyurethane mounts will make sure everything is nice and secure. The sound is perfect. It's just a nice low rumble not too loud at all and there is no drone. I guess that's why they use the staggered resonators so that they could tune the exhaust to the point that there wouldn't be drone. It actually sounds almost exactly like my Mazdaspeed 3 did when it was stock maybe a little bit more like stock with a race pipe where the second cat was. Like I said it's actually perfect. I tried to take a video in 4k, and while it turned out beautiful the sound was too muffled because I had used a microfiber towel and a chair to hold up my phone and I think it covered the mics too much. I'll try to get a better video later and post it to YouTube.
New features
- Manufacturer
- CorkSport