Save $10 On Orders Over $100. Use Code: CORKSPORT10

Home/Mazdaspeed 6/Mazdaspeed 6 All Parts

Mazdaspeed 6 All Parts

All of the 2006-2007 Mazdaspeed 6 performance parts and accessories are here listed with no filters in order from new to old for easy browsing. Fitment of the parts includes the overseas MPS 6 as well.

Give your Mazdaspeed 6 and Mazda 6 a wider range of adjustability with the rear camber arms

Spherical bearings are used instead of rubber or polyurethane for their superior strength.

We're critical of the products we produce for the Speed 6. The CorkSport rear camber arms are no exception.

Our camber arms offer 4.5 degrees of adjustability so you can fine tune your driving experience.

Mazdaspeed 6/Mazda 6 Adjustable Rear Camb...

$199.99

Quick view

Mazdaspeed6 Adjustable Front Upper Control Arms offer camber adjustment with long lasting strength.

Replace your entire front upper control arm for added adjustability and suspension rigidity.

Spherical bushings replace the OEM rubber bushings for better handling feel.

Dial in your front camber to maximize grip, correct for your lower ride height, or fit those new wheels.

2006-2007 Mazdaspeed 6 & 2003-2008 Mazda ...

$329.99

Quick view

Refresh your OEM HPFP with the CorkSport Mazdaspeed HPFP Rebuild Kit

Quality Packaging for the Mazdaspeed High Pressure Fuel Pump O-Ring Build Kit

All Parts visible in HPFP O-Ring Build Kit for Mazdaspeed

Months of material testing ensures correct functionality for both gasoline and E85 mixes.

Custom manufactured X-ring exactly matches OEM specifications for correct sealing.

Included hardware replaces the annoying Torx screws. We even include a security Torx bit for easy OEM screw removal!

Mazdaspeed E85 Safe HPFP O-Ring Rebuild Kit

$59.99

Quick view

Get great sealing for your upgraded or OEM MazdaSpeed 3 throttle body with the CS Throttle Body Gasket

Design for OEM and CorkSport 72mm throttle body

An enlarged center opening for no flow restriction with the upgraded CorkSport Throttle Body.

Pair with the CS Intake Manifold Gasket for the best sealing.

Mazdaspeed Throttle Body Gasket

$19.99

Quick view

Set of four spark plugs pre-gapped to 0.026inches for Mazdaspeed

NGK part # LTR7IX-11 1-step colder spark plugs

pre-gapped to 0.026” for stock to 450whp build

Mazdaspeed NGK 1-Step Colder Spark Plugs ...

$39.99

Quick view

Block off an unneeded EWG port with the CorkSport EWG Cap for Mazdaspeed and mazda 3

Designed to fit a Tial MV-R 44mm wastegate flange

44mm EWG Block Off Plate & Clamp Kit

$39.99

Quick view

Speed up your EWG Mazdaspeed 3 exhaust manifold installation

Save time on your installation, fits with tial 44mm WG

Used in our half mile racing Mazdaspeed 3

Works with any configuration of turbo installed with the CorkSport Cast Mazdaspeed manifold

Dumptube Kit for Exhaust Manifold

$129.99

Quick view

Mazdaspeed Exhaust Manifold is the first modular cast exhaust manifold platform

Shallow angle exhaust manifold for high power and great sound

Front and center EWG placement for all the Mazdaspeed engine bay bling

Included firewall heat shield for an easy and safe installation

Optional dumptube makes install and simple weekend project, no fabrication needed

Stainless steel loves to turn a gold then blue color with heat from your Mazda

Modular turbo flange options allow you to choose stock flange, T3 or Precision V-Band

Cast from 304SS with 5mm thick wall tubing

With the Mazdaspeed manifold and the CorkSport CST4 turbo we gained 25 peak HP over the stock manifold.

You can have an extra 25 wheel horsepower in your Mazdaspeed 3 with our turbo manifold over the XS power and other variants of the same exhaust manifold.

Save $50.00

Mazdaspeed Exhaust Manifold

$999.99 $949.99

Quick view

CorkSport Mazdaspeed 6 Front Mount Intercooler Kit.

The CS FMIC kit comes with everything you need to install on your MS6.

2.25” hot side piping and 2.5” to 3” cold side piping offers the best balance of spool time and high horsepower capabilities for your Mazdaspeed 6

A 21”x10”x3” intercooler ensures your Speed6 boost temps stay cool.

Custom wire-reinforced silicone ensures minimal expansion under boost.

Stainless T-bolt clamps are included to minimize the chance for boost leaks.

2006-2007 Mazdaspeed 6 Front Mount Interc...

$899.99

Quick view

Mazdaspeed Intake Manifold Gasket for an upgrade intake mainfold - CS Single Runner gasket

Large single ports eliminate the divider in the OEM gasket while also allowing for enlarged ports on the engine and intake manifold

Aluminum Foamette Material offers superior sealing characteristics and reusability

Lower IM mount spacer included to prevent warpage to intake manifold or cylinder head

Pair with your Mazdaspeed port injection system

Mazdaspeed Intake Manifold Gasket

$39.99

Quick view

Mazdaspeed Turbo with Stock flange fitment, boost by 3500rpm and power to 7000...the CST4 is the turbo replacement for the K04

Internal wastegate setup makes install straightforward and simple. BNR k04 precision

Add some noise and top end power in your Mazdaspeed with the 0.82 A/R EWG Turbine Housing BNR k04 precision

400whp+ Mazdaspeed 6 and all the power on under the curve BNR k04 precision

The easiest Mazdaspeed 3 400whp option today with functional IWG setup. BNR k04 precision

Included with all IWG turbos, a ceramic coated heatshield. BNR k04 precision

Mazdaspeed 3/6 CST4 Turbocharger

$1,199.99

Quick view

Tial is the best EWG option for the Mazdaspeed 3 and 6 and the CorkSport go to for our cast exhaust manifold.

304 stainless steel cosntruction ensures a long life of use on your Mazdaspeed.

The tial MVR EWG includes everything shown above, fitting, clamps and more to make installation a breeze with your Mazdaspeed turbo

Each Tial 44mm Wastegate includes an assortment of springs to allow you to tailor the EWG for your Speed

The compact design allows for extra clearance and easy installation in the Mazdaspeed platform.

Save $11.00

Tial Mazdaspeed 3 and Mazdaspeed 6 MV-R W...

$435.99 $424.99

Quick view

X Clutch offers a performance clutch upgrade for the Mazdaspeed 6, Mazdaspeed 3, MPS 6 and MPS 3.

The X Clutch kit includes all of the needed installation parts and alignment tool for your Speed3 and Speed 6.

The complete high horsepower twin disc clutch for the Mazdaspeed DISI platform

Save $41.96

XClutch Mazdaspeed 3 and Mazdaspeed 6 Per...

$1,241.95 $1,199.99

Quick view

Mazdaspeed 4.5 Bar Map Sensor Laser Etched Specs

OEM Shape to fit onto your intake manifold

Easy plug and play connector. No extension harness needed

Mazdaspeed 4.5 Bar MAP Sensor

$99.99

Quick view

The CS vacuum block helps clean up your Mazda engine bay.

Easily connect a boost gauge or methanol system without the need for tees

Precision machined billet aluminum is anodized for a long lasting finish that looks great

Seven 1/8" NPT threaded ports offer use with a variety of fittings

Simplify your vacuum and boost sources into one location

Small size and end mounting location gives tons of freedom for install location

Vacuum/Boost Distribution Block

$49.99

Quick view

CST6 Mazdaspeed Turbo With Free 4.5 BAR MAP sensor

CST6 Mazdaspeed Turbo designed better than precision BNR turbo

Side view stock mount Mazdaspeed 3 and 6 downpipe bolt pattern for turbo BNR KO4 precision

Billet compressor wheel with the latest tech for quick response and airflow for your Mazdaspeed

Balanced rotating assembly for durability BNR KO4 precision

The stock flange Mazdaspeed power dyno pull for turbo

CST6 Turbo Upgrade - 2006-2013 Mazdaspeed

$1,499.99

Quick view

The CorkSport Intake Manifold for Mazdaspeed is the complete solution for the very poor flowing OE intake manifold.

34mm injector fitment keep the fuel low in the engine bay

Manufactured from 6061-T6 aluminum and post machined for -6AN fuel lines

2007-2013 Mazdaspeed 3 & 6 Fuel Rail Kit ...

$129.99

Quick view

The CorkSport Mazdaspeed Intake Manifold is the complete solution for the very poor flowing OE intake manifold.

All the necessary hardware and gaskets needed for installation of the Mazdaspeed intake manifold

The intake manifold is manufactured from A356-T6 aluminum and post machined for OE fitment.

Integrated methanol ports are machined into each runner of the CorkSport Intake Manifold

Runner inlets are post-machined to remove any excessive slag from casting.

Optional auxiliary fuel rail allows you to add four Injector Dynamics Port Injectors for additional fueling and power.

2007-2013 Mazdaspeed 3 & 6 Intake Manifold

$949.99

Quick view

The COBB Accessport works with the Mazdaspeed 3 and Mazdaspeed 6

The COBB AP includes everything shown here, two faces, cables and a case.

Log all of the parameters in your Mazdaspeed

The only fuel pump kit with the upgraded spring

You can customize your AP with faces or paint one and make it unique

Save $35.00

MAZDASPEED COBB Access Port / CorkSport F...

$1,024.99 $989.99

Quick view

Switch to an external wastegate on your CST4 and CST5 using the CorkSport EWG housing. Designed for Mazdaspeed Turbo

0.82 A/R turbine housing offers large swallowing capacity for greater peak exhaust flow.

Specially designed turbine housing and supplied EWG elbow give flexibility for EWG fitment.

Optimum boost control, easy wastegate spring swaps, and quick servicing with an EWG setup.

Optional dump tube eliminates the need for fabrication during your EWG install.

EWG Upgrade Kit - CST4 & CST5 Turbo

$399.99

Quick view

CST5 Turbo K04 Replaement upgarde is the turbo for your Mazdaspeed 3 and Mazdaspeed 6

500whp+ and all the power on under the curve BNR K04 Precision Mazdaspeed Turbo

500whp+ and all the power on under the curve for your Mazdaspeed3

Pair the CST5 with a CS EGR Delete kit for improved clearance with your Mazdaspeed 3 3.5” intake BNR K04 Precision Mazdaspeed turbo

Efficient 11-blade billet compressor wheel delivers fast response and power under the curve to pull your speed 3 out of the hole.

High flow 9-blade turbine wheel reduces weight for fast response and low RPM spool from your DISI powered Mazdaspeed BNR K04 Precision

The easiest 500whp option today with functional IWG setup for your Mazdaspeed.

CST5 Turbo Upgrade - 2006-2013 DISI MZR M...

$1,349.99

Quick view

Make your Mazda & Mazdaspeed Intake cleaning kit.

Make your intake valve cleaning much easier with the CorkSport Valve Cleaning Tool.

Reinforced silicone ensures a good seal to easily remove carbon, blasting media, or cleaning chemical from your intake ports.

Cone shaped design & included clamp ensures snug fitment on almost any vacuum.

Ergonomic and compact design allows for easy use in an engine bay

This complete valve cleaning kits provides you with the unique tools needs to clean the intake valves in your Mazdaspeed

Valve Cleaning Kit for Mazdaspeed and Mazda

$59.99

Quick view

Mazdaspeed 3 Throttle Body Spacer. Billet aluminum is CNC machined and then anodized for great fitment and a clean look.

Mazdaspeed Throttle Body SPace comes with an O-ring is supplied with each spacer for an easy install.

Three pre-tapped methanol ports can be used with most nozzles on the market.

Each methanol port is in a usable location, even with the stock intake manifold.

72mm Throttle Body Spacer for Mazdaspeed ...

$79.99

Quick view

← Prev

1 2 3 4 5

Mazdaspeed 6 All Parts

About CorkSport

Shopping

Connect

Social links

SPONSORSHIP