Performance Air Intake | Short Ram Intake

One of the easiest and most beneficial performance enhancements you can do for your Mazdaspeed3 ,the Short Ram Air Intake replaces your factory airbox with an open intake system allowing more air into the intake chamber. The Mazdaspeed 3 Short Ram Performance Intake includes our precision machined MAF housing made from one piece of billet aluminum with included air straightener, durable dry flow air filter, and custom reinforced silicone connector. In initial testing, the Mazdaspeed 3 Short Ram Intake netted peak gains of +12HP and +17 lb torque.

Read The BlogProduct Release! Corksport Stage One Power Series Short Ram Intake for Mazdaspeed 3

CorkSport Short Ram Intake for Mazdaspeed 3

Prevent air leaks and inaccurate readings that can cause check-engine lights: The MAF housing is precision machined from billet aluminum with included air straightener.
Durable Dry Flow Air Filter: Reusable and water resistant, this unique non-woven filter media does not require oil to filter and trap dirt and actually sheds dirt under engine vibration unlike cotton-gauze which holds contaminates until you clean the filter
Custom reinforced silicone connector constructed with multi-layer nylon braid to provide more strength and power and a smooth internal transition for less turbulence and optimal flow
Stainless steel T-bolt clamps: Comes with polished stainless and ensure an airtight seal which prevents unmetered airflow
Upgrade to a CARB legal Stage Two Mazdaspeed Intake with a Turbo Inlet Pipe For the best value on the market
Corksport Service and Support: Receive a two-year warranty, full-color installation instructions, all of the needed installation hardware, and knowledgeable telephone installation support

How To Install the Mazdaspeed 3 Short Ram Intake.

It will take you Approx. 1 hour to install.

1 hour Install Time

2/5 Difficulty

2-Year Warranty

No CEL

Do you need a tuner first

>>CorkSport Reply: No tuner is required.

Jeffmazdaspeed303/28/2013, 01:35 PM

he have a check engine or not whit this product??

Sim03/24/2013, 11:37 AM

Could not be happier with my deicision to go with this intake. The install was easy thanks to the great instructions provided by CorkSport and it just sounds amazing! Worth every penny for this level of quality. I look forward to CorkSport taking my money again in the future! Thanks!

Keolamai Shook03/21/2013, 12:06 PM

Wow just installed this SRI today and what a big difference in power and sound! Really can hear the boost now thanks guys!

Brandon03/14/2013, 02:43 PM

I have not purchased it yet because i have heard that any bolt on mod throws the check engine light and will void my warranty. only on the 2013 speed3 have i heard this is an issue. is this true or no??

>>CorkSport Reply:The SRI will not give you a check engine light and most well designed products will be fine of your 2013 Mazdaspeed 3. If you are in California look at our Stage II intake, it has a CARB approval.

Thomas03/06/2013, 05:18 PM

Arrived a lot quicker than expected and talk about awesome finish/fit! Only question I would have is one that deals with the instructions vs what the car really had - It says to in the end reconnect a breather valve (the little 90deg. pipe between the MAF housing and TIP) but my car (100% stock til now) had a cap on that breather valve with nothing to connect it to from the start. Was that a good or bad thing? Or is that something on the 2010+ ones? I have a 2008.

>>>CorkSport Reply>>> Sounds like your Mazdaspeed 3 has the TSB repair with the new breather routing and replacement valve cover. You are good to go with capping it off.

William D Robicheaux02/09/2013, 01:56 PM

CORKSPORT!!!!!!!you make fantastic products. I am three days in on a sri intake . I have not had a dry road to test it on yet ,but the the sound and the tire spin is notin but fun fun fun !!!!! will give another review after dry roads and exaust are installed . I live and work on US 129 "the TAIL OF THE DRAGON" if any one wants to start a corksport nation here in east tn contact me at mitch.stott@gmail.com

Mitch01/17/2013, 06:40 PM

CORKSPORT!!!!!!!you make fantastic products. I am three days in on a sri intake . I have not had a dry road to test it on yet ,but the the sound and the tire spin is notin but fun fun fun !!!!! will give another review after dry roads and exaust are installed . I live and work on US 129 "the TAIL OF THE DRAGON" if any one wants to start a corksport nation here in east tn contact me at mitch.stott@gmail.com

Mitch01/17/2013, 06:40 PM

Great product. Fits perfectly and you can hear turbo spool and hear the bov...

Jose Jimenez12/18/2012, 01:54 PM

Could not have wished for better quality sounds great hearing the air rushing in through the intake I was actually shocked at how poorand cheap the oem parts were in apperance and manufacture this goes to prove how good the Corksport boys are at producing such fantastic products which work how they were intended thanks

Michael Walker Melb Aust10/30/2012, 02:01 AM

← Prev

1 2 345 6 7 8

Next →

Write a review

Would this fit on COBB’s turbo inlet hose?

Asked by Fernando | 06/19/2023, 05:38 PM | 1 answer(s)

Hey there, does this intake come with a turbo inlet pipe to replace the stock?

Asked by Jason Vargas | 11/07/2021, 07:36 AM | 1 answer(s)

will this fit on a 07 mazda 5 ?

Asked by datmazda dude | 04/15/2021, 08:18 PM | 1 answer(s)

Were the horsepower figures arrived at with a hot engine and the hood closed? Wondering on the effects of pulling in the hot air from under the hood.

Asked by Keith | 07/12/2019, 06:23 AM | 1 answer(s)

If I already have a Corksport Turbo Inlet Pipe installed, this should attach directly to that with no issues, correct? Thanks in advance for an answer

Asked by Chaz | 02/16/2019, 12:56 PM | 1 answer(s)

Hi, is this a 3” air intake or 2 1/2”

Asked by Silas Galdamez | 02/23/2018, 02:50 PM | 1 answer(s)

Looking into intakes for my '07 ms3. Is this basically plug and play? Would I be safe doing this without a tune/HPFP internals? I don't plan on any other mods just yet.

Asked by Miguel Tejada | 10/24/2018, 08:05 AM | 1 answer(s)

Can this be run on stock MS3 2010 without high pressure fuel internals?

Asked by Spin | 08/18/2018, 02:00 PM | 1 answer(s)

Will this fit the 2008 Mazda 3 S? And is the sound people report over 3k rpms different from the sound of the intake resonator delete which also comes over 3k rpms?

Asked by Cameron | 01/12/2017, 05:43 AM | 2 answer(s)