Shipping Estimator Shipping Estimator

Mazdaspeed 3 Lowering Spring Set

Price: $279.99
Price in points:  What are Points? 280 points

Give your car the performance appearance and edge you have been looking for with the CorkSport Lowering Springs.

By reducing ride height approximately 1.2" in the front and 1.0" in the rear adding the CorkSport Lowering Springs to your Mazdaspeed 3 will result in a quicker turning response crisper road feel a more aggressive appearance and a firmer spring rate while maintaining excellent ride quality.

Mazdaspeed 3 Lowering Springs

  • Lower your car by approx. 1.2" front and 1.0" rear for improved handling and less wheel gap
  • Crafted from high tensile strength spring steel for long lasting quality and performance
  • Conical Design: Trims in on top to allow for a full range of adjustment with our CorkSport Camber Plates
  • OEM finish to ensure lasting durability and rust protection
  • Front springs are 20% stiffer and Rear springs are 45% stiffer
  • Backed by CorkSport limited two-year warranty
  • CorkSport Service and Support: Receive full color installation instructions all of the needed installation hardware and knowledgeable telephone installation support

How To Install Your Mazdaspeed 3 Lowering Spring Set

It will take you one hour to install the CorkSport Lowering Springs with our easy-to-use instructions.

3 Hour Install Time

3 Hour Install Time

Difficulty: 3/5

3/5 Difficulty

2-Year Warranty

2-Year Warranty



Great upgrade from the stock springs. Matched up with Bilstein struts and rear dampers can feel the higher spring rate and corners so good. Even though its a small drop Im scraping every damn thing. I'm still glad I purchased these springs. Buy with confidence!
Love these springs perfect drop on my Gen 1 ms3. Get compliments everywhere no rub or anything with the corksport spring/shock combo. Perfect for looks and daily driving. Not to mention corners become your friend fast with these springs.
Write a review

How will this ride with 5 passengers? Is there a good chance to bottom out or rub if I have these and a 235/40/18 tire?

Asked by Tyler Nelson | 04/20/2021, 08:51 AM | 1 answer(s)

Can I install these springs with the stock struts and shocks? Looking to order ASAP

Asked by Edgar Luna | 03/07/2021, 02:00 PM | 1 answer(s)

Will these springs go with stock shocks on a 2013 Mazdaspeed3? If yes, will they affect the durability of the stock shocks at all? How long do these springs last in terms of reliability/mileage?

Asked by Dominic R. | 11/03/2020, 10:58 AM | 1 answer(s)

Do I have to replace the front sway links with these springs or can I reuse them ?

Asked by Julian Rojas | 05/29/2019, 06:30 PM | 1 answer(s)

Are these linear rate or progressive?

Asked by Todd | 03/31/2019, 07:05 PM | 1 answer(s)

Will Gen1 springs fit gen2 because it says 07-13?

Asked by Zach | 09/03/2017, 11:02 AM | 1 answer(s)

If I install these springs with the shock and strut kit - is there a need to adjust the sway bar link length? If so, should I be purchasing longer or short links - and how much? I am already using Corksport shocks, struts with a 1.2/1.0 drop and upgraded sway bar bushings and confirmed tight link connections.....suspension seems a bit clunky.

Asked by Keith Bickley | 08/01/2017, 04:00 PM | 1 answer(s)

I'm looking to purchase these corksport lowering springs it just shows 2 do I have to buy another set to go all the way around my car or do 4 come with it?

Asked by Chris | 12/27/2016, 09:41 AM | 1 answer(s)

With the purchase of these lowering springs, do you all recommend buying additional parts such as adjustable rear toe arms and/or adjustable rear camber arms to perform a proper alignment? Or can you to get the vehicle alignment back into manufacture specification with stock parts to avoid having to purchase and install those additional parts?

Asked by Jesse Guerrero | 06/30/2016, 08:23 PM | 1 answer(s)

Will I have to roll my fenders or do anything other than install/align on a 2007 Gen1 if I want no rub?

Asked by Ben Adler | 05/20/2016, 02:16 AM | 3 answer(s)

Will these work on a 2008 (GEN1) mazda speed3?

Asked by Cameron | 03/30/2016, 09:00 AM | 1 answer(s)

What is the actual spring rate of these springs? What is the spring rate for the n/a 3 lowering springs?

Asked by Gregory | 03/29/2016, 03:30 PM | 1 answer(s)

I bought a set a WHILE ago and I think one of my rear springs has lost its spring, any chance I am able to order just a set of rears?

Asked by Austin Bevins | 01/27/2016, 09:36 AM | 1 answer(s)

Are these springs linear or progressive?

Asked by Austin | 10/05/2015, 02:29 PM | 1 answer(s)

How can you tell which is front and which is rear spring? i received mine a while ago, but has been sitting in basement which flooded and the instructions basically disintegrated.

Asked by Rajeesh | 04/23/2015, 11:40 PM | 1 answer(s)

Will this work on my 2011 Mazda 3 2.5L?

Asked by Marc  | 03/09/2015, 11:28 PM | 1 answer(s)

Do you still need a alignment after installing the springs? Since it was just about an inch drop I was just wondering.

Asked by Larrison Gervacio | 03/02/2015, 01:41 PM | 1 answer(s)

what is the largest tire size that will work with these springs? i have 225/45/18 on stock wheels.

Asked by Christopher Galloway | 01/31/2015, 05:46 PM | 1 answer(s)

at what wheel specs do you recommend rolling fenders? i have 18x8 +45 with 245/40r18

Asked by James Mueller | 11/12/2014, 07:27 PM | 1 answer(s)

I was wondering if I got these lowering springs would I need a camber kit for the front or back? If so what exactly would I need? I have a Gen2 Mazdaspeed 3.

Asked by Brandon Bradley | 11/03/2014, 08:45 AM | 1 answer(s)

I just bought a set of Koni Yellow shocks/struts and had a question - do I need to trim my rear bump stops after installing these springs? Koni said it should not but trimming directions should come from the spring manufacturer. There is a lot of conflicting information online and I'd love a solid answer! Zoomfreakinzoom2.3 @ MSF 2010 MS3

Asked by John Semple | 10/27/2014, 07:25 AM | 1 answer(s)

Do i need to replace my struts if i want to install these? 2010 MS3

Asked by Jorge | 10/26/2014, 04:18 PM | 1 answer(s)
Mazda performance parts financing is available with CorkSport

Looking to finance your parts purchase and want to get 6 months NO interest on any purchase over $199? Click on the image above for more details.