Leather Shift Knob for Mazdas

Improve your shifting experience with the CorkSport’s leather shift knob for Mazdas and Mazdaspeeds. Weighing in at 270 grams and wrapped in high-quality black leather, our shift knob flows through the gears seamlessly and feels great while doing so.

Each shift knob starts by being embroidered. It is then hand wrapped and stitched, giving it an authentic touch. Once installed, it increases the luxury vibes of your vehicle.

Mazda Leather WEightedd Shift Knob Video

The CorkSport Advantage

Close up of CorkSport's Leather Shift Knob for Mazda and Mazdaspeeds.

Weighted performance: Weighing in at 270 grams, the our shift knob improves gear changing smoothness, while providing a more connected feeling to the transmission.

We pride ourselves in the durabilit of our products, inlcuding the leather shift knob made of Delrin.

We pride ourselves in the durabilit of our products, inlcuding the leather shift knob made of Delrin.

Construction: Made from Delrin plastic for an excellent grip experience, whether you like to shift with an open palm on top of the knob or cup it from the side.

The stitching on our leather, Mazda shift knob is carefully crafted.

The stitching on our leather, Mazda shift knob is carefully crafted.

Craftsmanship: Hand wrapped and stitched in genuine leather, the CorkSport shift knob stands up to the daily use of driving.

Additional Features

Compatibility: The CorkSport shift knob works with with all manual transmission, Mazda models from 1989 on up.
Designed in the USA: Engineered in Vancouver, Washington.
Superior CorkSport service and support: Includes a 2-year limited warranty, full color installation instructions, and all necessary components. We provide knowledgeable telephone support at 360-260-2675.

How To Install CorkSport Leather Shift Knob

It will take you an easy 5 minutes to install your new shift knob.

Awsome shift knob, very good quality. Together with CS shifter bushings and short shift plate, it takes shifting feel to completely another level!

Adam Mendelewski02/24/2016, 05:38 PM

Installation takes less than 5 minutes, and that is with a smoke and beer break. Knob is heavier and beefier than stock. It is not a dramatic difference, but shifting is smoother.

Chris Schraml10/30/2015, 12:04 PM

I've had this shift knob installed for about a week now. I love it! It's just a bit heavier than stock so my shifts aren't any slower but at the same time doesn't require as much effort as the stock knob. The form is exactly what I wanted as well. The only downside is it doesn't quite reach the shift boot. It still turns but it's really tight so I'm not sure if it's just stripping the threads or if there is still room for it to go down further. Either way it's a very small gap that you can't see as much as you can feel.

Benjamin Jacob09/21/2015, 11:47 AM

Nice shift knob but no silver stitching option. If it did it would be 5 stars.

Frank05/31/2015, 08:39 PM

Awesome, no nonsense shift knob. Weight is perfect, texture to the leather is smooth and supple while providing grip when you need it, no stitch bite. Natural feel when shifting from either the top or side.

By far the best knob I've tried for my 3 and it's ended the search.

Evan Worley04/16/2015, 11:14 AM

Feels great with your palm resting on top or pistol gripping it. Weight is perfect, the look it matches the interior perfectly. Everyone that drives my car wants one.

The only thing that could make it better is showing the gear pattern.

Alex Watson04/06/2015, 05:07 PM

It has been a while seen I was looking for a shit knob that would satisfy my taste but nothing convinced me until this new corksport product came out. I bought it for my mazdaspeed 3 and it feels and looks awesome! The red stitching makes it look very sporty! great match with my red and black interiors.

Shifting feels more pleasant!

For those who are questioning about the quality of the leather and it's stitching, the quality is outstanding. One thing is looking at it in the picture, another is having the feel of it during shifting. Like always Spencer and the guys at corksport are always willing to clarify any questions and help you with any product. So if you are looking for a great shift knob for your mazda don't look at universal shift knobs or other brands, this is the product for you, trust me! cs specially made it to be able to thread into the oem shifter which is great because the majority of the shift knobs on the market are with plastic caps and allen screws which increases the chance of damaging the oem thread(it happened to me with a sparco shift knob)

Once again thanks corksport guys for thinking about our mazda platform and putting dedication into such excellent products. Thumbs up!

Eliezer Perez02/27/2015, 05:44 PM

I bought this for my 2008 mazda3 to replace a very worn shift knob. Huge improvement. And I love the clásico look.

Robbie02/26/2015, 02:25 PM

I bought this for my speed 6 over the other shift knob keeps it looking clean and shifting between gears is much smoother!

Ryan02/17/2015, 06:55 PM

← Prev

Write a review

Will this fit on an 88 FC rx7?

Asked by Christian | 10/08/2022, 10:27 AM | 1 answer(s)

Will this fit my 93' Miata?

Asked by Rodney Johnson | 12/24/2020, 06:17 AM | 1 answer(s)

Hello. There is an Aluminum Boot Spacer in my package. Is this for 2014+ Models only? I have Mazdaspeed 3 Gen1 2008

Asked by Markus | 09/10/2019, 04:38 AM | 1 answer(s)

Does this fit the manual Protege5? Thanks!

Asked by Jason | 09/11/2018, 11:20 AM | 0 answer(s)

Hey corksport, the way your body/trim parts y'all make all look amazing and the fact that you specialize in mazdas makes your company my go to place to treat my speed3 with your goodies but I do have one recommendation with the lettering on mudflaps, floor mats, engine covers, etc. To have mazdaspeed lettering in the kind of way the 2nd gen OEM floor mats are written out with a smaller CS logo to indicate it's a corksport part above or underneath the mazdaspeed logo, if you did that to your mudflaps and engine covers/heat shields where you would mostly see mazdaspeed but still show off that it is in fact corksport would provide pleasing aesthetics, or if y'all would provide custom options for detailing on certain products to open a whole new customizable revolutionary direction to the mazda/mazdaspeed.

Asked by Joseph Baker | 02/05/2018, 06:01 AM | 0 answer(s)

Is it possible to get the knob without "Corksport" embroidered on it (would be willing to pay extra for the option to do so)?

Asked by Bimal Wadhwa | 11/27/2017, 10:57 PM | 1 answer(s)

Will this knob fit on the 2012 mazda 3 with auto trans?

Asked by Michael | 10/29/2017, 03:14 PM | 1 answer(s)

Will your leather shift knob fit new MX5 ND? Will it fit without gap to boot? How close is the red stitching to the ND stitching?

Asked by Brian | 04/17/2016, 10:08 PM | 1 answer(s)

Does it fit in Mazda CX7 or not?

Asked by Omar Daoud | 01/04/2016, 03:28 AM | 1 answer(s)

Will it fit for Mazda CX7 or not?

Asked by Omar Daoud | 01/03/2016, 09:01 AM | 1 answer(s)

Does this come with a shift boot or no?

Asked by Cody Kennedy | 12/10/2015, 05:40 AM | 1 answer(s)

Can you make these available with silver or black stitching to match MS6 interior?

Asked by Frank | 10/08/2015, 09:16 PM | 1 answer(s)

Any word yet on the possibility of a blue stitching/embroidery version? I sent a request like 3 months ago but havent heard anything yet.

Asked by Mario | 08/29/2015, 11:21 AM | 1 answer(s)

does this fit standard throw 5 speed mazda 3 transmissions? or only short throw?

Asked by kevin | 07/06/2015, 10:51 AM | 1 answer(s)

does this shift knob fit the standard length 5 speed mazda 3 or just the short throw 6 speed?

Asked by kevin | 07/06/2015, 09:33 AM | 1 answer(s)

May be dumb question but will this fit on 07 3s with auto trans.?

Asked by ZILLA | 06/03/2015, 06:16 AM | 1 answer(s)

Does this shift knob come with a shift pattern sticker? Thanks.

Asked by Mike L. | 05/08/2015, 05:56 AM | 1 answer(s)

You should definitely make this in blue. Your aluminum shift knob comes in blue, right? Do you sell a lot of those? The Skyactiv guys would love it in blue also. To match the gauges and the blue LED backlighting on the dash screens.

Asked by Mike L. | 05/06/2015, 07:59 PM | 1 answer(s)