2014-2017 Mazda 6 Lowering Spring Set

Performance Lowering Springs for your 2014-2017 Mazda 6 are back and better than ever before!

Have you been wanting to improve the look of your 6, while still keeping good ride quality and fitment? That was the main focus on the new CorkSport Lowering Springs for the 2014-2017 Mazda 6. The CS lowering springs will drop your 6 approximately 1.20in (30mm) front & 1.75in (45mm) rear, giving it a presence that is much more performance orientated. Note: The drop in the front is slightly less when compared to our original drop of 1.75" in both the front and rear, providing an improved ride.

Not only do the CS springs make your 6 look better, they also help improve driving characteristics with the increase to the front and rear spring rates. The spring rate in the front has been increased to 4.6K and the rear was increased to 8.1K. These new spring rates help improve the handling characteristics while going through the back roads and provide more feedback to the driver. More of the details on the CS lowering springs for the 2014-2017 Mazda 6 can be found below.

Pictured: 2016 Mazda 6 with CorkSport Drop-in Turbo Kit!

Read The BlogThe Best 2014-2017 Mazda 6 Lowering Springs are Back!

The CorkSport Advantage

Improved Handling:

Reducing the ride height and increasing the spring rates of your Mazda with the CS lowering springs will provide a reduction in body roll and will lead to a sportier, more agile feeling driving experience. This improvement to the stability of the vehicle gives you extra confidence when you want to push more through the back roads.

Style & Ride Quality:

Dropping your 6 1.20in (30mm) in the front and 1.75in (45mm) in the rear provides you with a whole new look. The new heights of the CS lowering springs levels out the 6 so that the vehicle is free from excessive rake. The factory dampening works well with the increased spring rates of 4.6K in the front and 8.1K in the rear so the ride is still smooth when driving around town or are doing highway trips.

Fitment & Installation:

The installation of the CS lowering springs on your Mazda 6 is right in line with OE so there will be no surprises during install. Only modifications to the bumps stops are required to maintain the correct distance before they are engaged when the suspension is cycling to provide a smoother ride quality.

Materials & Manufacturing:

The CS lowering springs are finished in CS blue powder coat to provide a durable barrier against the elements and corrosion. The springs are constructed with a spring steel that has a high tensile strength and also features spring isolators for the rear springs to ensure no new sounds come from the suspension during operation.

NVH (Noise, Vibration, and Harshness) may be increased due to stiffer spring rates.
Aftermarket performance dampers (shocks & struts) are recommended.
Vehicle shown has the CorkSport 2.5L Turbo Kit installed, non-turbo’d cars may have slightly higher ride height in the front suspension.

Additional Features

Vehicle Fitment: 2014-2017 Mazda 6
Developed in America: Designed in Vancouver WA, USA.
CorkSport Service and Support: Receive a 2-year warranty, full-color installation instructions, all of the needed installation hardware, and knowledgeable telephone installation support.

How To Install the Mazda 6 Lowering Springs

It will take you Approx. 4 hours to install.

4 hour Install Time

3/5 Difficulty

2-Year Warranty

No CEL

Have had these on for about a month now and have been so happy with them. The ride height is perfect now! A must have compared to the stock ride height!

Kellen03/20/2019, 11:21 PM

Ride is actually way more comfortable than OEM springs. Smoother ride yet firm, but you can’t complain whatsoever when on lowered springs. The drop is perfect & I’m glad I didn’t go with other brands like others have.

@SSJ6ix11/22/2018, 09:59 PM

The look is perfect. The work was easy, basic mechanic skills. No problem. The ride is great, and the delivery time was speedy enough for me!! Very pleased.

Randy Powell05/17/2017, 07:19 AM

Great product & delivers as promised. However, I would suggest replacing the dampeners as the original Mazda units do not respond quickly enough & make the car feel loose. Overall, 8/10.

Mounir Karkanawi09/09/2016, 07:31 AM

Just had them installed a few weeks ago. At first they looked amazing I couldn't believe the difference, then after they settled they looked even better. Extremely happy with this purchase. Definitely gave the car a totally different look. Thank you corksport :)

Holly05/23/2016, 04:17 AM

Took the car to another level as far as looks and handling! Dare i say a must have for these vehicles.

Rob04/04/2014, 07:16 AM

Just had them installed and love the responce and ride quality.

Tony01/23/2014, 06:50 AM

Write a review

What is the total gross weight of the product (including packaging)?

Asked by Ehsan Javahery | 04/04/2021, 10:16 AM | 1 answer(s)

When will this product be available for purchase?

Asked by Victor Camarena-Olea | 11/27/2020, 08:39 AM | 1 answer(s)

Im running 20x9 +42 wheels wrapped in 255/35/20 rubber on my 2017 Mazda 6. Would I have clearance issues or need to roll the fenders?

Asked by Zack | 05/22/2020, 11:11 AM | 1 answer(s)

I have a 2014 Mazda 6 with the factory 19" wheels will these springs work and have enough clearance?

Asked by Luis | 02/18/2020, 12:58 PM | 1 answer(s)

Will these fit the new 2018 mazda6 model?They do not. We have 2018+ springs in the works.

Asked by Michael Anglin | 08/25/2018, 09:43 PM | 1 answer(s)

Will this fit a 2018 M6 wagon?

Asked by Ed Fortunado | 08/25/2018, 03:14 AM | 1 answer(s)

When lowering the back, what do I need to do if anything with the rear height sensor

Asked by Richard | 11/25/2017, 07:55 AM | 1 answer(s)

Just purchased 18x8 wheels + 40 offset with 235 50r 18 tires online. I currently have these springs and I'm wondering now, if they'll fit without rubbing in the rear. I own a 17' Mazda 6 sport. Any thoughts?

Asked by Christopher Bostwick | 01/17/2018, 05:25 PM | 1 answer(s)

Will this fit 2017 Mazda 6 GT?

Asked by Nico T | 10/27/2017, 06:42 PM | 1 answer(s)

So with these springs i wont need a camber kit?

Asked by Adrian | 03/11/2016, 12:42 PM | 1 answer(s)

Can these be used with my existing stock shocks, etc? 2015 Mazda6 iSport. I'm guessing a realignment would be in order post install? New to all this. Appreciate any guidance.

Asked by Scott | 02/02/2016, 10:22 PM | 1 answer(s)