Mazda 6 Performance | Short Ram Intake

Elevate the performance and sound of your Mazda 6's 2.5-liter engine with the CorkSport Short Ram Intake. The factory airbox and filter often restrict the engine's capabilities and produce an uninspiring sound. The CorkSport SRI boosts your engines performance and sound with excitment of the custom reinforced silicone coupler, MAF housing, and high flow filter. Unlock the hidden potential of your Mazda 6 with the CorkSport Short Ram Intake.

Short Ram Intake For 2014-2018 Mazda 6 (2.5 Liter)

The CorkSport Advantage

Performance Gains:

The Short Ram Intake is an easy performance upgrade for your Mazda 6. Designed for 2014+ Mazda 6 2.5L engines, the SRI removes the air restrictions the OEM system has. This improved design adds up to 6WHP in our testing and desirable driver feedback. Dramatically reduce intake restrictions and get an impressive improvement in power throughout the entire RPM range with the Mazda6 SkyActiv Short Ram Intake System.

Mazda 6 short ram intake silicon in red, black, blue

Sound and Style:

The Mazda 6 SRI intake adds some show and tell to your engines appearance and sound. Your choice of black, blue, and red filters and silcone provides you with a customizable look to your engine bay. Mix and match to make the look that is perfect for your style. The psshh sound from the short ram intake will have driving for more!

Precision Machined:

Every CorkSport cold air/short ram intake features a meticulously engineered billet MAF housing. The use of a billet MAF housing guarantees that the intake's diameter is identical to the OEM's diameter providing a smooth airflow for accurate sensor readings.

SRI Silicone options in red, blue, and black

Dryflow Filter:

The CorkSport SRI uses a Dry-Flow media to ensure long lasting performance and durability. The filter offers an inverted cone design that allows more air to enter the system from the top. The non-woven media does not require oil to filter or trap dirt and shreds it under the vibration of the engine. The filter is reusable after washing allowing for a longer lifespan. Pair this with the SRI filter sock for a long lasting filtration system.

Fitment:

**How to find your build date of your 2014-2020 Mazda 6. Open the drivers door and locate the vehicle identification sticker. It will look like the picture below. There will be a location which says date shown with the red arrow. That is what you need to find your build date. As you can see on the example below the Mazda was built in November 2012.

No tuning required.
Does not work with engines equipped with the EGR Cooler located on top of the intake manifold.
Not confirmed to work with 2.0L engine. Use at your own risk.
Some early Mazda 6 production models may experience a CEL (Check Engine Light) with the use of the Short Ram Intake. If you have an early 2019 model you may need to get an update PCM ECU flash from your dealership to prevent this CEL.
Solution: With OEM components installed, schedule an appointment with your local dealership. Request the updated PCM ECU flash for TSB #: 01-015/19.
There will be some minor added engine induction noise as a result of installing this intake.
Replacement Filters: Available Here

Additional Features

Vehicle Fitment: 2014-2020 Mazda 6
Developed in America: Designed, tested, and validated in Vancouver, Washington, in the Pacific Northwest.
CorkSport Service and Support: Receive a 2-year warranty, full-color installation instructions, all of the needed installation hardware, and knowledgeable telephone installation support.

How To Install the Short Ram Intake

It will take you Approx. 1 hour to install.

1 hour Install Time

1/5 Difficulty

2-Year Warranty

No CEL

Purchased at the beginning of this week and accidentally gave the wrong shipping address. Customer service was excellent and Brian B. got everything sorted out for me and out the door in the same day! Install was super simple. About 30 min. including set up. I have noticed a bit of a power difference and the car has a more aggressive sound under heavier throttle. I even noticed a slight whistle today when I was out for a drive. So thanks guys! I’m driving around with a big smile on my face(:

Konnor Krebs03/05/2022, 01:11 PM

Quick and easy install with no CEL. Instantly smoothed out the terrible throttle response these engines have. Also it added a nice sound, not ricey either, and definitely added a bit of power especially at high RPM.

Michael Welling11/22/2021, 07:29 AM

Super easy to install, took maybe 30 minutes including finding my tools. Sounds great as well!

Noah Stubblefield01/15/2019, 04:21 AM

very easy to install and you do NOT need any knowledge at all. the full colored instructions are extremely simple to follow. I love the swooshing sound of air sucking when you tap the gas pedal!!!

Tim06/19/2017, 08:57 PM

I really like the sound and feel of the car after this installation. It has a nice sounding, agressive growl between 1500-3500 rpm that is not overwhelming or annoying. The breathing and power between 3500-6000 on the highway is great! 1/2 hr to install, and worth the price.

MGD04/22/2017, 10:40 AM

feel like my car is breathing better.

good adding to my car.

like it even i have not tried others.

Saud Alharfi06/16/2016, 06:31 PM

Zoom Zoom. Installed this on my 2015 Mazda6 i Sport 2.5L in ~15min. Noticed she was a bit peppier and the exhaust tones are noticeably better, but not over done. Well worth the price!

Scott12/12/2015, 04:31 PM

An absolutely flawless product that is incredibly simple to install!

Intake sounds great when you get on it & full wail is amazing!

Throttle response is now immediate compared to the stock setup.

Fits 2016's no problem!

Mounir09/11/2015, 10:39 AM

I am comparing the stock intake to the CorkSport intake...

Short Ram Air Intake: Very quiet.

When stepping on the gas, I hear a nice growl sound that is not annoying, but good to the ears.

As for power gain, I can definitely feel the additional torque; it's not a crazy improvement, but definitely worth the money.

If you need to start somewhere with a mod to increase performance, check this little baby out.

Cardobcf (very OCD customer)08/31/2015, 06:45 PM

Awesome part. Wakes the car right up. Better exhaust note throughout the RPM range, slight improvement in power, and less restriction. Couldnt ask for a better intake for the Skyactiv

TJ04/24/2015, 07:01 AM

← Prev

Write a review

Will this fit a non-US RHD 2.5l model?

Asked by afar | 08/25/2023, 07:49 AM | 1 answer(s)

Will this fit a 2021 mazda 6 touring (non-turbo)?

Asked by Andy | 07/05/2023, 10:55 AM | 1 answer(s)

I recently bought over from my friend as he sold.his car already. But when i install it . Ytd it don sound very nice as compared to others i saw on youtoue. Then this morning when i start the vehicle there is CEL . .

Asked by Ryan | 06/27/2023, 07:13 PM | 1 answer(s)

I watched the install video for the SRI...at about the 45 second mark he removes a short black tube from the bottom of the factory air box and places it on the front of the hood area. I don't see him replace it after the install...does this part not get put back on after replacing it? What does this tube go to? I have a 2019 Mazda 6 non turbo and have been looking for a site to get some mods...I think I have found my place here! Thank you.

Asked by Jim Trzpit | 02/05/2023, 08:23 AM | 1 answer(s)

When will the blue filters be available again?

Asked by ISRAEL RODRIGUEZ | 06/02/2021, 10:37 AM | 1 answer(s)

I have a 2018 Mazda 6 with the 2.5L Skyactiv G (non turbo) engine. Just to confirm will this work on that engine?

Asked by Michael | 03/27/2021, 11:16 PM | 1 answer(s)

I have a 2016 Mazda 6 2,5L. I'm considering buying this but I've read somewhere that the 2014-2018 Mazda3 & 2013-2017 Mazda6 Cold Air Box starves the engine when used. Can you verify this or did you do test with both the CAI and CAB? Also, to you ship to Belgium? Kind regards

Asked by Mike Brunet | 05/18/2020, 10:35 AM | 1 answer(s)

Will this work on my 2018 Mazda6 non-turbo 2.5i

Asked by Wes | 03/28/2019, 10:44 AM | 1 answer(s)

Does this work with the 2013 Mazda 6 manual 2.2L diesal turbo?

Asked by Ant Bates | 01/06/2019, 12:40 AM | 1 answer(s)

When installing this I have read that you have to get your computer flashed. Is this true?

Asked by Leon | 08/20/2018, 06:02 PM | 1 answer(s)

Does this effect the Mazda factory warranty?

Asked by Matt | 02/11/2018, 07:20 PM | 1 answer(s)

Hello some catalog for sky-diesel engines AT 175hp stage 1. Thanks

Asked by Ricardo Ribeiro | 12/14/2017, 06:44 AM | 1 answer(s)

I need to replace the filter, do you guys sell replacements and if not what are the dimensions of the filter itself?

Asked by Todd | 12/09/2017, 07:46 AM | 1 answer(s)

Will this work on a Gen 3 Mazda 6 MY2017? 2.5L Skyactiv engine

Asked by Yu-Chi Lu | 10/05/2017, 07:45 PM | 1 answer(s)

I just got rid of my 2010 Mazdaspeed3. I still have the mass air flow housing from my corksport intake. Is this the same mass air flow housing? If so can I order the silicone elbow alone?

Asked by Ratana Ny | 08/03/2016, 12:39 PM | 1 answer(s)

does it fit the two types 2.0l and 2.5l engine?

Asked by Saud Alharfi | 03/25/2016, 02:25 AM | 1 answer(s)

Will you guys eventually make a heatshield for this intake ?

Asked by Jasiel | 02/15/2016, 11:49 AM | 1 answer(s)

Any updates for a 3rd gen Mazda 6 CAI?

Asked by Kim | 12/28/2015, 10:46 PM | 1 answer(s)

someone is selling this short ram on craigslist... does it fit a 2013+ cx5?

Asked by Rae | 09/03/2015, 09:35 PM | 1 answer(s)

Are you working on a CARB SRI or CAI?

Asked by Eddie | 04/14/2015, 11:03 AM | 1 answer(s)

I saw an option to put on your built day when you select the intake but now the option isn't there anymore. Does it matter when you put in the order?

Asked by Sam | 02/02/2015, 10:25 PM | 1 answer(s)