Mazdaspeed 6 SRI | Stage II Power Series Short Ram Intake

CorkSport Mazda Performance Gauges Video

Give your 2006-2007 Mazdaspeed 6 immediate boosts in horsepower and torque by bringing more air into the intake chamber. Our simple to install Mazdapseed6 SRI includes a MAF housing that is precision machined from one piece of billet aluminum with included air straightener. Designed to maintain optimal flow and generate ideal performance, Corksport designs each part with exacting tolerances and uses the latest in computer aided manufacturing techniques to make sure you get the highest quality, best performing part for your money. In initial testing, the CorkSport Mazdaspeed6 Short Ram Intake netted max gains of +25 lb torque and +33 HP.

The CorkSport Advantage:

Best value on the market! Our MS6 intake kit includes the turbo inlet pipe to completely replace the stock intake tubing. Purchased separately this part can cost anywhere from $150-$200
Choose from 108 different color combinations to customize the look of your SRI
Prevent air leaks and inaccurate readings that can cause check-engine lights: The MAF sensor is secured to the housing using T304 stainless fasteners for a rock solid connection
Durable Dry Flow Air Filter: Reusable and water resistant, this unique non-woven filter media does not require oil to filter and trap dirt and actually sheds dirt under engine vibration unlike cotton-gauze which holds contaminates until you clean the filter
CARB Approved: Designed and approved to meet California Air Resources Board Emissions Standards: Carb Approval
Custom reinforced silicone connector constructed with multi-layer nylon braid to provide more strength and power and a smooth internal transition for less turbulence and optimal flow
Stainless steel T-bolt clamps: Available in stealth black or polished stainless and ensure an airtight seal which prevents unmetered airflow
Replacement Air Filter is: Available Here
Corksport Service and Support: Receive a two year warranty, full color installation instructions, all of the needed installation hardware, and knowledgeable telephone installation support

Install time 3/5 Difficulty 2 year warranty No CEL

I installed the stage II SRI and TIP on my 2010 Mazdaspeed 3 tonight and it's amazing!

It's a well built kit and the sound of my turbo spooling is so noticeable now:) Under hard acceleration you can really hear the thing!

Only thing I noticed was that coming out of first gear into 2nd, there is a single backfire. Just waiting to make sure the ECU clears that up. If it does this this review gets an easy 5 stars from me.

Joseph G06/07/2012, 10:02 PM

I have done my fair share of modifying over the years and there is good quality in this company's parts. I took my time installing, and I read the instructions to make sure I did not miss anything. I put about 100 miles on my car before going wide open throttle and it was well worth the wait and time to do this right. I did not get any check engine light like what can happen if you rush. I love the sound of the turbo spooling and the throttle response is amazing. Great job guys!!! I look forward to buying more from you.

Jesse Hopper05/16/2012, 01:06 PM

I purchased the PSSRI with a few other modifications two months ago. Because I am a first time turbo charged car owner I had a large number of questions for Tyler (the gentlemen that helped me thru my modifications). Tyler spent a lot of time explaining all of the modification I wanted to make to me 2010 MS3 (thank you for all of your help Tyler!). I received my LED fog lights, short shifter plate, Cobb Tuner Access Port Tuner and Stage 2 Power Series Short Ram Air Intake at the same time. After receiving all of the parts, I was rather overwhelmed as I had never actually wrenched on my car before. I was extremely satisfied with the instructions sent with each part. Start to finish to install all of the mentioned parts took just over two hours. Once I took the car out for a drive, I immediately noticed a huge difference in throttle and turbo spool response! I also noticed an instance increase in horse power, as well as the ability to listen to the turbo spool! I highly recommend this intake as well as all other mentioned modification provided by Cork Sport. I have now ordered a downpipe with the high flow catalyst and race pipe as well as the Cork Sport full Cat Back exhaust. I a looking forward to receiving these new modifications for my MS3!

Micheal Rockwell-Pate05/01/2012, 06:41 PM

Love this intake! It was the first mod I did. I love the sound it makes. Ive had it on for 3 months now and still drive with the windows down.

Shannan Stalnaker04/30/2012, 10:08 PM

Absolutely amazing! The sound and power that you get out of this is worth every penny. I've owned my speed for almost a year now and this made it feel like a new car. It's so much more full of life. Do yourself a favor and get it.

Christopher Hable04/17/2012, 01:13 PM

This is an awesome mod, let me start out by saying that besides installing RMM and SSP I have never modified a car. The instructions were great and led me through every step of the way. The sound is fantastic and way different than stock, the spool-up is quite loud and you can actually hear the BPV! Great buy, hoping to get this thing paired with CBE and RP soon!

Samuel Gomez04/17/2012, 08:25 AM

Just installed on the weekend. Took just over an hour...first time mechanic though. After installation....took it out for a spin....absolutely unreal!!! Power gains are noticeable right away! Turbo spools a lot quicker and the sound is addicting. Great quality products from Corksport...Mazda magicians!!!

Stefano Tassone03/05/2012, 11:05 AM

Love this SRI, you get to customize it out to your specs and it sounds like your going to suck in a small kid or dog into the engine of your car!! Great Job Corksport!!

Robert Kreider02/29/2012, 08:10 PM

WOW, thats all i can say, turbo spools up even faster. Car sounds amazing i cant believe i didnt buy it sooner. This has to be one of your first mod. Easy install and great instructions.. the paperclip part is hard to do but other than that it was smooth install. Cant wait to dyno and see the gains. I bought mine in black and it didnt get scratched a bit installing it in the tight area very good quality.

Jake02/29/2012, 01:10 PM

This should be the first thing bolted to your MS3, installation is simple with Corksports detailed instructions. Boy now you can hear that turbo spool. Thanks corksport!

David Murray02/26/2012, 10:42 AM

← Prev

1 234 5 6 7

Next →

Write a review

Can i run this intake with a cst4/350whp down the road?

Asked by Zac Barker | 07/11/2022, 03:24 AM | 1 answer(s)