Shipping Estimator Shipping Estimator

Cx7 Stage II Power Series Short Ram Intake

 
Price: $254.99
Price in points:  What are Points? 255 points
Short Ram Intake | CX-7 Short Ram Intake
Cx7-6-118-100
+
Add to wish list




Give your Mazda CX-7 immediate boosts in horsepower and torque by bringing more air into the intake chamber. Our simple to install SRI includes a MAF housing that is precision machined from one piece of billet aluminum with included air straightener. Designed to maintain optimal flow and generate ideal performance, Corksport engineers each part with exacting tolerances and uses the latest in computer aided manufacturing techniques to make sure you get the highest quality, best performing part for your money. In initial testing, the CorkSport CX-7 Short Ram Intake netted max gains of +25 lb torque and +33 HP.

The CorkSport Advantage:
 

  • Best value on the market! Our intake kit includes the turbo inlet pipe to completely replace the stock intake tubing.Purchased separately this part can cost anywhere from $150-$200
  • Choose from 108 different color combinations to customize the look of your SRI
  • Prevent air leaks and inaccurate readings that can cause check-engine lights: The MAF sensor is secured to the housing using T304 stainless fasteners for a rock solid connection
  • Durable Dry Flow Air Filter: Reusable and water resistant, this unique non-woven filter media does not require oil to filter and trap dirt and actually sheds dirt under engine vibration unlike cotton-gauze which holds contaminates until you clean the filter
  • CARB Approved: Designed and approved to meet California Air Resources Board Emissions Standards: Carb Approval
  • Custom reinforced silicone connector constructed with multi-layer nylon braid to provide more strength and power and a smooth internal transition for less turbulence and optimal flow
  • Stainless steel T-bolt clamps: Available in stealth black or polished stainless and ensure an airtight seal which prevents unmetered airflow
  • Corksport Service and Support: Receive a two year warranty, full color installation instructions, all of the needed installation hardware, and knowledgeable telephone installation support
  •   

Technical DocumentsVideo Clips




I am a 2008 Mazda CX-7 Grand touring owner: I could not be more impressed with this air intake. Easy install, High quality material, Easy to follow instructions, and a good boost in air flow. I can hear the turbo spool and the air race through the intake, and it sounds awesome. Much better than OEM. This will give you a power gain you can feel. Thank you CorkSport! I cant wait to purchase the intercooler you offer. I have a corksport bypass/blow off i got from a friend that im going to put on tonight.

Thanks Again.

-Ian E.

ps: These guys also have wonderful customer service! i called and asked about this intake before purchase, and was very impressed with the person i spoke with. They know there stuff!
Bought this for my CX-7 and it works and looks great! Can definitely hear the turbo now and gets plenty of pickup. They just released the airbox for the cx-7 and now I have to get that. A BOV and exhaust will definitely make it purr, too. Corksport is awesome!!
I'm going to start by saying that this is a great deal. For an SRI and a TIP both for the price is very exceptional. Plus, the ability to customize the colors is just icing on the cake. My car sounds great with it on and no problems at all with the MAF sensor / no CEL's.



Now for the negative part of my review: the clamp that's provided to connect the SRI to the TIP is too small. I had to use the stock clamp, but it worked fine. The breather hose was also too long, resulting in me having to cut it so that it doesn't kink. Lastly, one last (but small) gripe: the instructions state to install the MAF sensor in the housing so that the wire connector is on the opposite side of the airflow arrow, this isn't the case.



In reality, my complaints are tiny drops in a bucket. The Corksport Stage II SRI and TIP are a great investment.
I installed the stage II SRI and TIP on my 2010 Mazdaspeed 3 tonight and it's amazing!



It's a well built kit and the sound of my turbo spooling is so noticeable now:) Under hard acceleration you can really hear the thing!



Only thing I noticed was that coming out of first gear into 2nd, there is a single backfire. Just waiting to make sure the ECU clears that up. If it does this this review gets an easy 5 stars from me.
I have done my fair share of modifying over the years and there is good quality in this company's parts. I took my time installing, and I read the instructions to make sure I did not miss anything. I put about 100 miles on my car before going wide open throttle and it was well worth the wait and time to do this right. I did not get any check engine light like what can happen if you rush. I love the sound of the turbo spooling and the throttle response is amazing. Great job guys!!! I look forward to buying more from you.
I purchased the PSSRI with a few other modifications two months ago. Because I am a first time turbo charged car owner I had a large number of questions for Tyler (the gentlemen that helped me thru my modifications). Tyler spent a lot of time explaining all of the modification I wanted to make to me 2010 MS3 (thank you for all of your help Tyler!). I received my LED fog lights, short shifter plate, Cobb Tuner Access Port Tuner and Stage 2 Power Series Short Ram Air Intake at the same time. After receiving all of the parts, I was rather overwhelmed as I had never actually wrenched on my car before. I was extremely satisfied with the instructions sent with each part. Start to finish to install all of the mentioned parts took just over two hours. Once I took the car out for a drive, I immediately noticed a huge difference in throttle and turbo spool response! I also noticed an instance increase in horse power, as well as the ability to listen to the turbo spool! I highly recommend this intake as well as all other mentioned modification provided by Cork Sport. I have now ordered a downpipe with the high flow catalyst and race pipe as well as the Cork Sport full Cat Back exhaust. I a looking forward to receiving these new modifications for my MS3!
Love this intake! It was the first mod I did. I love the sound it makes. Ive had it on for 3 months now and still drive with the windows down.
Absolutely amazing! The sound and power that you get out of this is worth every penny. I've owned my speed for almost a year now and this made it feel like a new car. It's so much more full of life. Do yourself a favor and get it.
This is an awesome mod, let me start out by saying that besides installing RMM and SSP I have never modified a car. The instructions were great and led me through every step of the way. The sound is fantastic and way different than stock, the spool-up is quite loud and you can actually hear the BPV! Great buy, hoping to get this thing paired with CBE and RP soon!
Just installed on the weekend. Took just over an hour...first time mechanic though. After installation....took it out for a spin....absolutely unreal!!! Power gains are noticeable right away! Turbo spools a lot quicker and the sound is addicting. Great quality products from Corksport...Mazda magicians!!!
Love this SRI, you get to customize it out to your specs and it sounds like your going to suck in a small kid or dog into the engine of your car!! Great Job Corksport!!
WOW, thats all i can say, turbo spools up even faster. Car sounds amazing i cant believe i didnt buy it sooner. This has to be one of your first mod. Easy install and great instructions.. the paperclip part is hard to do but other than that it was smooth install. Cant wait to dyno and see the gains. I bought mine in black and it didnt get scratched a bit installing it in the tight area very good quality.
This should be the first thing bolted to your MS3, installation is simple with Corksports detailed instructions. Boy now you can hear that turbo spool. Thanks corksport!
I've put quite a few CAIs on Mazda3s over the past 6 years but this is the first MS3 I've done. Man was it a pain in the butt compared to a naturally aspirated car; nevertheless, it was worth it. I'm about 600 miles away from my home and tools and was able to use a tool kit purchased at the local gas station, some pliers, and a crescent wrench. I would suggest having what it recommends but I'm an AmeriCan, not an AmeriCan't. 2012 MS3 sounds awesome and pulls like hell.
Just installed this on my 2011 speed3. I bought the car brand new in August of 2011 so it has less than 8,000 miles. Immediate power gain and incredible sound. Not only does the turbo spool up faster, it also holds boost much better than with the stock air intake. Took longer to install than the estimated time on the instructions, but not difficult. Instructions were easy to follow and had great diagrams. Glad I chose this as my first mod.
real quality parts and great shipping customer service cant be beat and if mapped with the cobb tuner this intake is the best
My first mod on my 2012 ms3. Excellent quality. Best bang for the buck. Easy install. Love the sounds. Good job Corksport... :)

this is a great product for the money adds great power, and sounds great to boot........ however the first mod should be the motor mount insert, but this for sure should be the second.
This is the first mod that you should do on your Mazdaspeed3!! What a difference it makes and the sound of the turbo spool makes driving your speed a whole new beast. The installation instructions that are provided by Corksport are perfect and easy to follow so installing this mod is no problem. Thank you Corksport for making such a high quality mod! Don’t wait, the SRI and TIP are worth the money and it is the best value compared to any other company. Stop reading reviews and pick this up now!!
I would like to start this review by stating my mechanical experience:

NONE

With that being said...wow!

I ordered the part on Sunday afternoon and received it Thursday (in Florida). Everything was packed with care, including the instructions. When the weekend finally rolled around, I requested a helping hand from my father-in-law and his tools. Seeing as this was my first installation of an aftermarket part, I thought I needed all the help I could get. Even though his help was greatly appreciated, looking back on it now, I realized I could have taken care of this myself. The instructions were perfect. From start to finish, everything was laid out in such an intuitive manner in the instructions, it would be difficult NOT to install it correctly! It took a little over 1 and 1/2 hours (if I had any prior mechanical experience, I'm sure it would have only taken about 40 minutes or less, but since I kept on referring back to the instructions every few moments to ensure a proper install, it took me longer). It really is shocking to see the factory parts that Mazda used. And when comparing them to Corksport's parts, it is a wonder the car even ran! When installing the parts, you can see the meticulous details that Corksport put into their parts, from the welding and bends, to the quality raw materials to make this Mazda scream now! And man does it scream! After installing the parts and ensuring everything was secure, I cranked her up and let her sit at idle to make sure I didn't get any CELs. After that period was over, it as time for the test drive. I wanted the full experience, so I rolled the windows down to hear the SRI and TIP pull in the air...but it wasn't my ears that caught the first difference, it was the "butt dyno." When I gave her some gas, I was grinning from ear to year. The additional power and sound still gets me every time. The car has more pull and a beautiful "Whoooosh!" sound kicks in when you give it some gas. Along with this, if you drive "like a normal person" you improve your gas mileage by a few mpg...but with the power and sound, it is awfully hard not to push the accelerator a little harder than normal.



After it is all said and done, I couldn't be happier. From detailed instructions to noticeable power gains, the total experience was flawless. Corksport has a customer for life! Great product and great service!
This item arrived quickly and well protected. The install went smoothly and the fit was very good. My expectations were modest even in light of the hefty power gains claimed by CorkSport. My expectations have definetely been exceeded. The power increase is phenomenal. The sound of air rushing in is addictive. I typically leave the radio off now with the side window down just to enjoy the sound. while unscientific, my "seat of the pants" dynometer confirms CorkSports power claims. This is a terrific modification and worth every penny at twice the price.
good install and excellent quality. the sound is pretty cool
Took me a little longer to install but was well worth it, Chris at corksport was super helpful and I'm so happy with how the car sounds and performs now, hands down amazing part!
Installed it last weekend! My butt dyno definitely can tell the difference. The sound is brilliant. There is quite a bit less lag with turbo spooling. 2nd and 3rd gear pull really nicely.



I've been driving with the window open to hear its song.



It took me quite a bit longer to install than the instructions laid out, but it's done and I am extremely happy!!!
Actually feel a few more horses and it sounds amazing

You can't ask for a better value! After I installed this I noticed an amazing HP gain and It sounds so freaking cool now. You can really hear the turbo spooling. If you haven't bought one, do it NOW!
No check engine light, easy to follow instructions, great gains, free sticker in the box! I am thrilled with my sir/tip and will gladly buy more fromt his great company.
This was my first mod and I LOVE IT! I think that every one should do this mod first. Worth the money hands down.
Great product, impressive results. The sounds is great and coupled with other intake/exhaust mods and a tuning solution your MS3 will really put you in your seat!
For all of you who have been kicking around the idea of an intake (like I did for 9 months) just do yourself a favor and buy the Corksport intake/TIP combo. I cannot tell you how much of a blast the car is to drive now. There is a noticable increase in acceleration over 3000 rpm. The sound is awesome and LOUD - you can even hear the stock BPV now! I suggest getting the cold air box also to fill the hole in your engine bay and to protect the filter from any stray water/dirt.

The guys at CS were awesome and magicked up an airbox for me even though I was origonally told it might be a three week wait. The parts are manufactured and packaged well and the install isn't to bad - just make sure you have a longnose set of angled pliers handy - the longer the better!

Cannot speak highly enough of Corksport and their products/customer service.
Wow, simply amazing... very well constructed... the gains they claim you can feel, turbo spools much quicker, car feels like it just woke up... one of the best performance mods money can buy, my Mazda dealer even likes it... they have no issues about it at all. btw the sound you get is well worth the admission ticket...Thanks Corksport for producing such an amazing product
I have bought this, installed it, and love it aswell. However, my mazda dealership says i have to take it off or it will void my warranty. Any advice/suggestions?
Amazing....the sound is great...the power is there...fun fun fun
Hardest part is removing the old parts. Installed in about 30 minutes. Noticable HP increase. Well worth the money.
Installation of the Corksport sri was a bit time consuming but straight forward and easy. For the money it is a very good product. Power gain is noticeable and the sound of hearing the turbo spool never gets old. If you get the sri also get the Forge BPV at the same time. They sound and look amazing together!!
I have had this intake on my car for over a week now and I LOVE IT!!!!! This was a fairly easy project to install and the quality and fitment are superb. I love the way it sounds and the power it has generated is wonderful. Thank you Derrick for all your help and a great product. This intake is def what my car was missing.
As the previous reviews have listed, the worse part is removing the stock parts. After that the CS SRI/TIP goes on quick and matches up tightly. The sound is amazing. The only draw back is a slight loss of power in the lower RPM range. I am already contemplating adding the race pipe to try to regain my low end power. Hopefully CS has a solution for the CEL on the down pipe, as well! Nothing like 310+ hp in a hatchback!!!
THE #1 mod that should be installed onto this car is this here intake. The gains are noticeable, the sound is loud enough to hear the woosh, but quiet enough where it doesn't annoy you. Absolutely spectacular product!
Great product and great quality. The car feels really strong and the sound is awesome. Derrick hooked me up with some great service and answered every one of my questions. Thanks guys!
All I can say about this intake is WOW!!!! This system was very simple to install. The only thing that took any time at all was removing all of the stock parts. Talk about a very poor flowing stock intake system!! When that was all done putting the CorkSport on was a cake walk. The inlet pipe fit rite up to the turbo nice and snug. When I was all done instaling I took the car out for a little spin. The sounds this system makes are crazy!!! It put a big smile on my face. The performance is even better!!! The turbo is rite there from the dig and never drops or falls. This is the best intake system I have ever heard or felt.The power gain's you get from this intake system are AMAZING!!!. If you have a 2010 Speed3 then you need this intake kit. Great job CorkSport for a great intake system.
Great product. Warning, I am a driver, not an installer. I do not even like to look under the hood, I just like to drive my awesome 2k10 ms3. I pay for my parts to be put on.



Pros:

-Great power increase starting mid-range and finishing through top of rpm range

-horsepower per dollar upgrade is as good as it gets

-more powerful sound than stock



Cons:

-None, this is an extremely well priced and useful part, couldn't imagine the car without it.
I noticed after installing the intake that I lost a little power in the lower rpm range. However, the top-end performance has been greatly enhanced. Stock, it used to fall on its face after 4500 or so. Now it pulls hard all the way to red-line. I recommend buying the race-pipe as well to bring back some of the low-end power you lose.
Wow! The first time I heard the sound of the intake I honestly giggled. This intake paired with a Turbosmart Dual Port BOV makes some fantastic noise; almost sounds like a purring panther. Car pulls harder and turbo spools quicker. This is a no brainer upgrade. Excellent quality product. Easy install though takes some patience, the right tools and tiny hands are useful.
The CorkSport Power Series intake for the 2010 Speed3 is absolutely amazing. Car pulls a lot harder and doesn't fall on its face for the last 500 rpm to redline as did stock. Turbo sounds nice while spooling and you even get a little BOV noise. Makes me feel like I actually have a turbo now. Excellent product waiting for cat back. Thanks guys well done.
The power series Intake is very nice and well made from CorkSport engineers. Performance wise my car pulls a lot harder on top end and the turbo spools up a lot quicker compared to stock!!!! I love the sound!!!! Next step is down pipe once CorkSport figures out engine code, so that my Mazda dealer will work on my car under warranty. Lets get the speed 3 over 310 hp. Thanks CorkSport!

Robert B.
Write a review

Hello, I just ordered a SRI 2 but I forgot to ask you in advance if it comes with the breather or not because I did not have my car upgraded with a breather kit. Thank you in advance !

Asked by ADRIAN  | 12/15/2014, 11:08 AM | 1 answer(s)

Looking to finance your parts purchase and want to get 6 months NO interest on any purchase over $199? Click on the image above for more details.