Shipping Estimator Shipping Estimator

2007-2013 Mazdaspeed 3 Strut / Spring Combo Set

Old price: $679.98  
Price: $656.98
You save: $23.00 (3.38%)
Price in points:  What are Points? 657 points
Save 3.38%

Products in package


Give your car the performance appearance and edge you have been looking for. By reducing ride height approximately 1.2" in the front and 1.0" in the rear, adding the CorkSport Lowering Springs to your Mazdaspeed 3 will result in a quicker turning response, crisper road feel, a more aggressive appearance, and a firmer spring rate, while maintaining excellent ride quality.

Improve the ride and handling of your Mazdaspeed 3 or Mazda 3 with the CorkSport Adjustable Struts and Shocks The CorkSport Mazdaspeed 3 and Mazda 3 Struts and Shocks are 15 way adjustable allowing you to customize your ride to your driving style and limit body roll to make your car more predictable and stable even without the addition of lowering springs. CorkSport Shocks and Struts change both rebound and compression damping simultaneously for a greatly improved ride quality.

For More information and installation instructions on each product visit their page directly.

2007-2013 Mazdaspeed 3 Adjustable Shock/Strut Assembled Package

We’ve taken our performance lowering springs, rebound adjustable struts/shocks, and camber plates and combined them with quality OE pivot bearings, bump stops, and dust boots to create a complete package deal. This package deal comes to your door pre-assembled and ready to install. No need to fight with a spring compressor or risk damaging the OE components that would typically be reused. All this and a savings of $70 vs. purchasing separately.

After getting these installed i noticed a loud metal to metal contact in the front end. I still haven't figured it out.... But i just ordered new sway bar end links to see if it would help. Great quality, the ride and feel is so much better than stock. Looks clean af. Just need this noise to go away.
As oppose to the first reviewer, I did not have any sort of problems with the brake line brackets. The strut and shocks, along with the spring set, ride very nicely. Pretty great product so far.
First off the shocks and springs are not bad

after tweaking and adjusting they handle pretty good and looks alot better

as for the cons

the first set i got one of them would not allow adjustment it was stuck and would strip the adjuster screws

took way to long for corksport to send me another one

over a month of back and forth before they finally gave me another one

the brake line brackets are also designed wrong the OEM shocks have a different shape for the brake lines which allow you to actually use them

these do not

i had to bend them to the get the lines to stay and they still weren't very secure

so id really give about 4 stars for the product itself and about two stars for corksport and the BS i had to put up with to get a replacement for a defective part

Write a review

Will these fit my 2015 Mazda 3 GT?

Asked by Ashneil Prakash | 06/09/2016, 09:40 PM | 1 answer(s)

Would there be enough clearance to run these with 225/45/18 tires on stock rims? Thanks

Asked by Ian Lewis | 03/11/2016, 07:19 AM | 1 answer(s)

Dear Corksport, what is the resulting front and rear camber after install of both damper/strut and spring combo on an otherwise stock 2013 mazdaspeed3? Gen 2 already has a considerable amount of neg. camber up front on stock suspension (inner tire wear galore), just didn't want to make even more negative. Can camber plates be added to this set up later along the line? Thanks!!

Asked by Peter | 01/19/2016, 12:28 PM | 1 answer(s)

Recently bought these a few weeks ago, they are great but when i load people in the back my back tires will scrap with fender just wondering what tire size will i need to not have it scrap? Current tire size 235/40/18 thanks!

Asked by Jose cruz | 11/22/2015, 09:41 PM | 1 answer(s)

Probably a dumb question but These are the very same struts if you buy them alone righ? Just really wanna make sure

Asked by Jose cruz | 10/06/2015, 09:45 PM | 1 answer(s)

Does this set come with the springs mounted on the front struts already? Or will I have to install them myself?

Asked by jesus m. rodriguez | 04/28/2015, 08:14 AM | 1 answer(s)

Would these require fender roll on OEM wheels?

Asked by Sam | 03/21/2015, 01:11 AM | 1 answer(s)

Hey from australia would it fit a 2013 mazda 3 hatch bl series thanks

Asked by Carlo | 01/15/2015, 01:06 AM | 1 answer(s)

Will this fit on a 2006 Mazda 3 Hatchback?

Asked by Sam | 01/14/2015, 06:49 AM | 1 answer(s)

Looking to finance your parts purchase and want to get 6 months NO interest on any purchase over $199? Click on the image above for more details.