{"id":8375,"date":"2016-09-30T08:52:17","date_gmt":"2016-09-30T16:52:17","guid":{"rendered":"http:\/\/www.corksport.com\/blog\/?p=8375"},"modified":"2019-01-30T06:23:08","modified_gmt":"2019-01-30T14:23:08","slug":"mazda-3-carnage","status":"publish","type":"post","link":"https:\/\/corksport.com\/blog\/mazda-3-carnage\/","title":{"rendered":"Mazda 3 Carnage"},"content":{"rendered":"<p>Last year we embarked on a new race car project: the Mazda 3. Our goal was to develop the car into a frontrunner in the T4 SCCA class and have a shot at the national title at the <a href=\"https:\/\/www.scca.com\/runoffs\" target=\"_blank\" rel=\"noopener\">SCCA runoffs<\/a> in 2016. Along the way, we\u2019ve been making changes to the car and working on improving the setup, along with testing out products. One of the products we developed and built along the way was our <a href=\"https:\/\/corksport.com\/2014-mazda-3-big-brake-kit.html\" target=\"_blank\" rel=\"noopener\">Big Brake Kit<\/a> (BBK). We never really explained why that kit was so important. So let me explain.<\/p>\n<p><img loading=\"lazy\" decoding=\"async\" class=\"aligncenter size-full wp-image-8380\" src=\"https:\/\/www.corksport.com\/blog\/wp-content\/uploads\/2016\/09\/image002.png\" alt=\"CorkSport Mazda 3 Carnage\" width=\"470\" height=\"196\" srcset=\"https:\/\/corksport.com\/blog\/wp-content\/uploads\/2016\/09\/image002.png 470w, https:\/\/corksport.com\/blog\/wp-content\/uploads\/2016\/09\/image002-300x125.png 300w\" sizes=\"(max-width: 470px) 100vw, 470px\" \/><\/p>\n<p><!--more--><\/p>\n<p>Slowing any car down from 120 mph one to two times puts some serious load on the OEM brakes, but for the most part they can handle it. If you\u2019re trying to slow down from that speed twice every 1.5 minutes over 25\u201330 minutes, however, you start finding the limits of the OEM brake real quick.<\/p>\n<p>On our Mazda 3, we had <a href=\"https:\/\/www.cobaltfriction.com\/Articles.asp?ID=252\" target=\"_blank\" rel=\"noopener\">Cobalt Brakes<\/a> make us special racing brake pads using their Xr2 compound for the front and Xr4 for the rear. We ran the Mazda 3 last year at the Daytona runoffs, and again at a local track day in the off-season early in 2016.<\/p>\n<p>When we did a suspension inspection, we discovered the caliper pistons had some discoloration and cracks, and the inner brake pad had a bit of a bow to them from the extreme heat being generated.<\/p>\n<p>We\u2019d been working on our Mazda 3 BBK and had a chance to test it out at <a href=\"https:\/\/portlandraceway.com\/\" target=\"_blank\" rel=\"noopener\">Portland International Raceway<\/a> in a race condition for a weekend, running one practice session, one qualifier, and three races.<\/p>\n<p><img loading=\"lazy\" decoding=\"async\" class=\"aligncenter size-full wp-image-8379\" src=\"https:\/\/www.corksport.com\/blog\/wp-content\/uploads\/2016\/09\/image004.png\" alt=\"CorkSport Mazda 3 Carnage\" width=\"470\" height=\"313\" srcset=\"https:\/\/corksport.com\/blog\/wp-content\/uploads\/2016\/09\/image004.png 470w, https:\/\/corksport.com\/blog\/wp-content\/uploads\/2016\/09\/image004-300x200.png 300w\" sizes=\"(max-width: 470px) 100vw, 470px\" \/><\/p>\n<p>We found quickly that the brakes were <a href=\"https:\/\/www.corksport.com\/blog\/big-brakes-not-enough\/\" target=\"_blank\" rel=\"noopener\">generating a massive amount of heat<\/a> and would require ducting, even with our BBK.<\/p>\n<p style=\"text-align: center;\"><iframe loading=\"lazy\" src=\"https:\/\/www.youtube.com\/embed\/9MFLoiHSdlg\" allowfullscreen=\"allowfullscreen\" width=\"560\" height=\"315\" frameborder=\"0\"><\/iframe><\/p>\n<p>Since the BBK isn\u2019t legal in SCCA T4 class, we installed new Cobalt pads, rotors, and calipers, along with Motul RBF660 brake fluid, and hit the track for the <a href=\"https:\/\/www.scca.com\/pages\/2016-scca-majors\" target=\"_blank\" rel=\"noopener\">SCCA Majors<\/a> event in July. And, well . . . let\u2019s just say the ducting is still not enough for the OEM brakes. Keep in mind that it only took two hours of track time for them to overheat.<\/p>\n<p><img loading=\"lazy\" decoding=\"async\" class=\"aligncenter size-full wp-image-8378\" src=\"https:\/\/www.corksport.com\/blog\/wp-content\/uploads\/2016\/09\/image006.png\" alt=\"Mazda 3 Carnage\" width=\"275\" height=\"480\" srcset=\"https:\/\/corksport.com\/blog\/wp-content\/uploads\/2016\/09\/image006.png 275w, https:\/\/corksport.com\/blog\/wp-content\/uploads\/2016\/09\/image006-172x300.png 172w\" sizes=\"(max-width: 275px) 100vw, 275px\" \/><\/p>\n<p>As you can see in the photo above (there on the right side), the inner pad was overheating so much it allowed the pad backing plate to bend, causing the center of the pad to wear out quickly. This is with racing brake pads meant for high temps and severe abuse! On the driver\u2019s side, the pad material was gone. It was metal on metal.<\/p>\n<p><img loading=\"lazy\" decoding=\"async\" class=\"aligncenter size-full wp-image-8377\" src=\"https:\/\/www.corksport.com\/blog\/wp-content\/uploads\/2016\/09\/image008.png\" alt=\"Mazda 3 Carnage\" width=\"396\" height=\"415\" srcset=\"https:\/\/corksport.com\/blog\/wp-content\/uploads\/2016\/09\/image008.png 396w, https:\/\/corksport.com\/blog\/wp-content\/uploads\/2016\/09\/image008-286x300.png 286w\" sizes=\"(max-width: 396px) 100vw, 396px\" \/><\/p>\n<p>Here you can see the driver\u2019s side caliper after the event. We lost 1\/4 inch of the piston face where it contacts the brake pad due to heat. The rubber duct boot basically melted and burned up over the weekend from the temperatures.<\/p>\n<p>After looking at this, you might be asking, \u201cSo? What\u2019s the point of this? I\u2019m never going to race my car.\u201d<\/p>\n<p>My point is that if you do any track events or even spirited driving, your stock brakes simply won\u2019t hold up. If you do any high performance driving, which amounts to about two hours on the track (much like a race weekend), then you\u2019ll need to upgrade your brakes. That is, unless you enjoy swapping calipers, pads, and rotors every weekend. Even if you do only two high performance driving events, you\u2019ll spend an equal amount getting the <a href=\"https:\/\/corksport.com\/2014-mazda-3-big-brake-kit.html\" target=\"_blank\" rel=\"noopener\">CorkSport Big Brake Kit<\/a>.<\/p>\n<p>So before you hit the track in your Mazda 3, do two things: 1) Get some bigger brakes, and 2) install some <a href=\"https:\/\/www.corksport.com\/blog\/big-brakes-not-enough\/\" target=\"_blank\" rel=\"noopener\">brake ducts<\/a> or your list of repair parts will look like this after a few weekends.<\/p>\n<p><img loading=\"lazy\" decoding=\"async\" class=\"aligncenter size-full wp-image-8376\" src=\"https:\/\/www.corksport.com\/blog\/wp-content\/uploads\/2016\/09\/image010.png\" alt=\"Mazda 3 Carnage | CorkSport\" width=\"346\" height=\"367\" srcset=\"https:\/\/corksport.com\/blog\/wp-content\/uploads\/2016\/09\/image010.png 346w, https:\/\/corksport.com\/blog\/wp-content\/uploads\/2016\/09\/image010-283x300.png 283w\" sizes=\"(max-width: 346px) 100vw, 346px\" \/><\/p>\n<p>-Derrick<\/p>\n<p><img loading=\"lazy\" decoding=\"async\" class=\"aligncenter size-full wp-image-8257\" src=\"https:\/\/www.corksport.com\/blog\/wp-content\/uploads\/2016\/06\/Derrick-Ambrose-01.png\" alt=\"Derrick Ambrose, CorkSport, Mazda\" width=\"600\" height=\"200\" srcset=\"https:\/\/corksport.com\/blog\/wp-content\/uploads\/2016\/06\/Derrick-Ambrose-01.png 600w, https:\/\/corksport.com\/blog\/wp-content\/uploads\/2016\/06\/Derrick-Ambrose-01-300x100.png 300w, https:\/\/corksport.com\/blog\/wp-content\/uploads\/2016\/06\/Derrick-Ambrose-01-500x167.png 500w\" sizes=\"(max-width: 600px) 100vw, 600px\" \/><\/p>\n","protected":false},"excerpt":{"rendered":"<p>Last year we embarked on a new race car project: the Mazda 3. One of the products we developed and built along the way was our Big Brake Kit (BBK). Now let us explain why it&#8217;s so important.<\/p>\n","protected":false},"author":3,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[462,53,277,9,36,8,162],"tags":[330,46,10,70,62],"class_list":["post-8375","post","type-post","status-publish","format-standard","hentry","category-ask-the-mazda-expert","category-corksport-mazda-performance-leader","category-mazda-mazdaspeed-lifestyle","category-mazda3","category-motorsports","category-new-products","category-mazdaspeed-project-car","tag-big-brake-kit","tag-corksport","tag-mazda-3","tag-mazda-aftermarket-parts","tag-mazda-performance"],"aioseo_notices":[],"_links":{"self":[{"href":"https:\/\/corksport.com\/blog\/wp-json\/wp\/v2\/posts\/8375"}],"collection":[{"href":"https:\/\/corksport.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/corksport.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/corksport.com\/blog\/wp-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"https:\/\/corksport.com\/blog\/wp-json\/wp\/v2\/comments?post=8375"}],"version-history":[{"count":0,"href":"https:\/\/corksport.com\/blog\/wp-json\/wp\/v2\/posts\/8375\/revisions"}],"wp:attachment":[{"href":"https:\/\/corksport.com\/blog\/wp-json\/wp\/v2\/media?parent=8375"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/corksport.com\/blog\/wp-json\/wp\/v2\/categories?post=8375"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/corksport.com\/blog\/wp-json\/wp\/v2\/tags?post=8375"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}