{"id":7450,"date":"2015-02-19T05:05:19","date_gmt":"2015-02-19T13:05:19","guid":{"rendered":"http:\/\/www.corksport.com\/blog\/?p=7450"},"modified":"2024-09-30T09:55:58","modified_gmt":"2024-09-30T17:55:58","slug":"corksport-adjustable-front-camber-arms-mazdaspeed-6","status":"publish","type":"post","link":"https:\/\/corksport.com\/blog\/corksport-adjustable-front-camber-arms-mazdaspeed-6\/","title":{"rendered":"The CorkSport Adjustable Front Camber Arms for the 2006-2007 Mazdaspeed 6"},"content":{"rendered":"\n

Introducing the all new adjustable front camber arms<\/a> for the 2006-2007 Mazdaspeed 6<\/a>!<\/p>\n\n\n

\n
\"Mazdaspeed<\/a><\/figure><\/div>\n\n\n

Our new front camber arms are manufactured from A513 steel and powder-coated black for long-lasting durability. The design has been FEA (Finite Element Analysis) tested and beta tested for strength and durability. Below shows the FEA with 780 lbf (0.87g lateral cornering force) applied to the ball joint (magenta arrows) with the arm pivot points fixed (green arrows). A force of 780 lbs was the result of Road & Track Magazine\u2019s maximum corner force of 0.87g lateral in a stock Mazdaspeed 6<\/a>.<\/p>\n\n\n

\n
\"Mazdaspeed<\/a><\/figure><\/div>\n\n\n

The resulting FEA shows a maximum stress of 30k PSI, with the yield strength of the material being 67k PSI. Therefore, the control arm has no yielding at the stock Mazdaspeed 6\u2019s maximum cornering force. Remember,\u00a0this is a worst case scenario, because one control arm will never need to endure the entire car\u2019s corning force. Ultimately the design has a minimum factor of safety of 2.21.<\/p>\n\n\n

\n
\"Mazdaspeed<\/a><\/figure><\/div>\n\n\n


<\/a><\/p>\n\n\n\n

Probably the most exciting feature of the CorkSport Mazdaspeed<\/a> <\/a>6<\/a> control arms is the camber adjustability. With an adjustment range from -0.2 degrees to -2.0 degrees, you are sure to find a setup that fits your needs. So don\u2019t wait! Get your adjustable front camber arms here<\/a>, before they’re gone!<\/p>\n\n\n\n

-Barett, CS Engineering<\/p>\n\n\n\n

Connect with us<\/strong><\/p>\n\n\n\n