Collaborating with CorkSport – R&D for the Community

My name is William Dawson; for those who do not know me, I am owner/tuner at Purple Drank Tuning. In this Guest blog, I want to bring up some of the research & development I was able to contribute to with CorkSport (behind the scenes) to help bring some new performance parts to the Mazda community.

One day, many months ago, I was approached by Barett@CS to help with the tuning and development of some mystery parts CorkSport had in the works. Being who I am, I couldn’t turn down the chance to work on some new projects that could help continue to push the Mazda platform we love.  

With the pleasantries out of the way, we got down to the plan and the data.  Barett had a list of goals and how he wanted to move through the parts in testing.  The amount of data that was communicated through the first live tuning session was great. On the CorkSport in-house dyno we took their shop car to an impressive 420whp (e48 + 6 port setup) with stock manifolds, stock throttle body, and stock camshafts.

This laid the groundwork and set the stage for their product release of the CS Camshafts which gained 22whp across the curve. Along with the power increase, the camshaft upgrade also netted surprising results with turbo response.  The turbo spooled 100rpms quicker than the factory camshaft allowed. THESE ARE DROP IN RESULTS, ZERO ADJUSTMENTS! 

Mazdaspeed camshaft

Efficiency hit us with another surprise when we decided to put the CS Intake Manifold (set to re-release in early 2019) on the car and help the engine balance all of the air we have begun shoving into our test vehicle. Once again CorkSports engineering pays off with another 9whp increase and 100 rpm quicker spool up. The car lost 2-3 psi of boost which we were happy to put back in the car allowing for us to do an apples-to-apples comparison but the numbers elude me so I cannot speak to what we ended up with on that day. 

 

Mazdaspeed 3 intake manifold

 

At this point we did not know how much more we could get as the CorkSport Mazdaspeed Drop-In Turbo that was installed on the test car was producing an impressive 450whp, this did not stop us as we needed to test one more item. In comes the CS 72mm Throttle Body, this upgrade was constantly overlooked by the Mazdaspeed3 and Mazdaspeed6 community because of other attempts to get an upgraded throttle body created complications with drive by wire tables and throttle response.

Personally having a 75mm TB and not being able to enjoy the on/off throttle response and laggy part throttle was a very frustrating experience; one that even made me skeptical.  Then getting to test CorkSports product was MIND BLOWING! The test car again spooled around 100rpms sooner and throttle response was phenomenal; all with just removing 4 bolts and swapping a Throttle Body this is insanity. This team did it again, my disbelief overshadowed by pure joy that they developed a working unit and it far surpassed the factory unit in throttle response and driveability. 

 

Mazdaspeed3 72mm throttle body

 

I have known the CorkSport family for years and it does not matter what department I am working with they are always on point and pleasant to deal with regardless of the situation. Between PD and CorkSport I could not be happier to invest countless hours of hard work and R&D to allow this winning family to provide further developments and support to the Mazdaspeed 3 and Mazdaspeed 6 platforms. 

 

– Will Dawson (PD Tuning)

 

Special thanks to Will for committing his time and expertise to help CorkSport continue to grow and support the Mazdaspeed community.    – Barett @ CorkSport

600hp Mazdaspeed 3 Build Path – CorkSport Barett’s 2009 Mazdaspeed

If you haven’t heard already, the CorkSport Dyno Day and Summer Event was a blast with food, friends, raffles, a Show-N-Shine, and the continuous string of dyno runs.  The highlight of the dyno runs came when one of the CorkSport Engineers, Barett, put his car on the rollers.  With a few minutes of warm up and anticipation building, it was finally time to see what the “CorkSport Speed” could do. 

600+ WHP Mazdaspeed 3 on Dyno

Getting past the ecstatic crowd to see the dyno screen showed an impressive 620whp/530wtq.  Now, whether you were at the show or not, you may be wondering what Barett’s setup is to support these numbers.  It’s not a short list but is simpler than you would expect. 

In this blog, we are going to layout the WHOLE build to show you how your Mazdaspeed can make 600+whp.  

Dynograph data of Maszdaspeed 3 625 WHP

The engine was built by CorkSport in preparation for setting up the Dankai Engine ProgramIt features Manley Connecting Rods and Platinum Pistons, head work very similar to the Dankai 2 Built Longblock, along with the CS BSD (balance shaft delete) and CorkSport Camshafts.  Holding the block together are L19 head studs and ARP 2000 main studs.  

To get the air in and out of the engine efficiently we have an assortment of bolt-on parts and some prototype parts because what kind of CorkSport R&D car wouldn’t have some prototype performance parts on it?  To break this down in the simplest way possible we have laid out a full build list:

600hp Mazdaspeed 3 Build List:

  • CorkSport Built Engine:
    • Manley Pistons – 0.5mm overbore @ 88mm
    • Manley H-Beam Connecting Rods
    • CS Balance Shaft Delete
    • Dankai 2” Ported Headed: Single Runner Intake, Bowl Work, Combustion Chamber Touch Up, Exhaust Porting
    • CS Camshafts
    • Stock Valve Springs (We would recommend upgrading these and plan to do so ourselves)

Now, this isn’t the complete list, but it does lay out most of the essential parts to get your Mazdaspeed 3 over 600whp.  You might have picked out a couple “prototype” mentions in that list above…well we can share a bit on the new CorkSport Mazdaspeed Turbo.  You’ve seen the power it can make…and it still has some more left in it up top, now check it out some sexy billet and massive turbine.

Mazdaspeed 3 Turbo for making 600 WHP
Mazdaspeed 3 Turbo Turbine Closeup for 600+ WHP

Lastly, none of this power would be possible without the fuel to support it.  As you may know already, the OE direct injection fuel system taps out around 380whp on an efficient build so how do we make another 240whp?  Auxiliary fueling is the key my friends, and we recently posted a blog to help you explore Methanol Auxiliary Fueling that I invite you to read.  To stay focused on Barett’s 600+whp build we have made an auxiliary fueling build list below:

Upgrade Your Turbo with the CST4

Methanol Auxiliary Fueling 600hp Mazdaspeed Build List:

  • AEM Boost Based Pump Controller
  • Snow Performance 5 Gallon Cell Trunk Mounted w/CS Prototype Mounting Bracket
  • AEM 80 micron in-line filter pre-pump
  • ProMeth 220psi Pump (Essential for flowing this volume of methanol)
  • Snow Performance Solenoid
  • Devil’s Own 1in/4out distribution block
  • 4x Devil’s Own 90degree nozzle holders
  • 4x ProMeth Compact Check Valves (Essential for proper AFR control between shifts)
  • 4x Devil’s Own D07 Nozzles (One per intake manifold runner; each flowing ~10gph)

Despite that this auxiliary fuel setup is providing the fuel required to support just over 600whp; it is at the ragged edge of what can be supported.  Looking at the dyno graph further up you can see torque decline after 6000rpm and horsepower go flat. This is due to the auxiliary fuel system reaching its maximum fueling capacity and thus forcing us to reduce boost pressure as engine RPM goes past 6000rpm.  

At this power level, true port injection auxiliary fueling is the correct step to take.  Lucky for you guys and gals, we are currently exploring this path with our product R&D. We plan to give you guys and gals a full breakdown of our experience and how we built a full port injection auxiliary fuel system that can support over 600whp.  

AND…I forgot to mention one very critical aspect of this entire build.  Professional Tuning! This specific build was E-Tuned on the CorkSport in-house dyno by Dale Owen of Gem Tuning.  E-Tuning is a great way to set up your car with the tuner that is the best suited for your platform and vehicle build because it doesn’t require the tuner and the vehicle to be in the same place at the same time.  

Hang tight for more on the PI Auxiliary Fueling and thanks for tuning in with CorkSport Performance.

-Barett @ CS

Product Release – Camshafts for DISI MZR Motor –

Mazdaspeed Camshafts for DISI MZR Motor

After two years of testing, design and research, CorkSport is proud to announce the release of our Mazdaspeed Camshafts for the 2007 – 2013 Mazdaspeed 3 and the  2006 – 2007 Mazdaspeed 6. Specifically designed around the MZR DISI engine platform, this camshaft set is engineered to reliably provide an increase of power and torque without sacrificing lower rpm power and torque.

Mazdaspeed Turbo Camshafts

 

Mazdaspeed Turbo Camshafts

Dyno Test of CorkSport Cams -vs- OEM Cams

The cams have been thoroughly tested on our in-house Dyno Dynamics Dynamometer. Controlling test conditions to rule out power differences from tune, gas, temperatures, and other factors our camshaft set produces dyno proven power gains of up to 26 horsepower on a OEM motor! We accomplished our goal; a large band of power increase, limited lower rpm power loss, and a smooth idle.

We regularly beta test our products with customers. These cams have already been daily driven and track proven by multiple cars.

Camshaft! What the heck is that? We break it down for you in our whitepaper and give you the gory details about our development process.

Order your CorkSport Camshaft Kit  today – Click Here

The perfect upgrade for every 2007 – 2013 Mazdaspeed 3 and 2007 – 2009 Mazdaspeed 6 owners that wants to fine tune their motor to perfection.