Description
HPFP for Mazdaspeed
Mazdaspeed 3 High-Pressure Fuel Pump (HPFP) Internals for both the Mazdaspeed3 and Mazdaspeed 6 took over 2 years of research and development to bring innovation you can count on in your Speed3 and Speed6. The CorkSport Max Flow Fuel Pump Internals have the best in market hardening surface treatments, high strength coatings, and a machined tolerance. Our Mazdaspeed HPFP Internals will give you the most performance available for your dollar. We make these fuel pumps with precision machining methods, we then treat the surface and coat it for strength, and finally machine the internals again for a perfect fit that provides your Mazdaspeed ultra-high efficiency. Real world application will allow for a greater horsepower capability, safer air/fuel ratios, and never need to worry about fuel supply in your Mazda.
| PRODUCT FEATURE | OEM | APR/CP-E | KMD | AutoTech | |
|---|---|---|---|---|---|
| OEM Spring Keeper | |||||
| Upgraded Spring | - | ||||
| Piston Size | - 8.0 | 9.5 | 9.8 | 9.8 | 9.8 |
| Octagonal Piston Head | |||||
| Installation Video (Internals) | - | - | |||
| Installation Video (Pump) | - | ||||
| Install Tool(s) | - | - | |||
| Lowest Piston Weight | - | ||||
| Manufacturer Created Accessport Tuning Maps | - | ||||
| Serialized | STICKER | ||||
| Surface Hardening Before Coating | - | ||||
| Machined After Coating | - | ||||
| Developed on Mazda MZR |
What's In The Box:
- Fully Machined Installation Tools Designed to help provide the most trouble free install on the market (the keeper tool even turns into a bottle opener for your keychain).
- High Rate Spring A higher rate spring is included in our kit for increased reliability and efficiency.
- Designed Specifically for Mazdas The ONLY pump internals on the market designed by a Mazda performance company for the Mazda MZR engine, including Mazdaspeed 3, Mazdaspeed 6 and Turbo CX7.
- Precision tolerances and improved efficiency 50% larger than the OEM pump internals for increased fuel volume flow.
- Required Hardware Anodized Aluminum Installation Sleeve and Retaining Hardware included.Tough Aluminum Case For storing your factory internals or anything else that is legal.
- CorkSport Service and Support: Receive a two year limited warranty, full color installation instructions, all of the needed installation hardware and knowledgeable telephone support.
How To Install Your Mazdaspeed MZR DISI Max Flow Fuel Pump Internals
It will take you two hours to install the CorkSport Mazdaspeed Fuel Pump Internals with our easy-to-use instructions.
2 Hour Install Time
3/5 Difficulty
2-Year Warranty
No CEL
Reviews
Derek Fisher
My dad and I installed two of these back to back, one in a 07 MS3 and one in a '13 MS3 (funny, its the beginning and the end), the first one took an hour out of caution, the second one was half the time and both cars run great. But really, the best part isn't the fact that the part is extremely well made and feels bulletproof, it's the box it comes in. That is one hell of a box. Seriously kudos to whoever's idea that box was. I don't know what I'll do with it but I'm glad I have it.
Jesse Frink
One of the few first upgrades I did. I wanted this to be one of the first mods as I didn't want to worry about future upgrades and the benefits over the stock HPFP had me sold. The only downside is it is much easier to justify buying more parts since this essential install was done about 8 months ago. Can't complain, I love my Mazda!
Brendan Klassen
Just installed my hpfp and I didn’t think I would feel as much as a difference as I did. I am so glad i listened to all the speed3 forums. Getting 1800+ psi
Kent Marven
Don't know what to say, work flawlessly. Easy to install and I am hitting close to 2100psi now. Make sure to clean out all the crud from the housings. Be careful not to let dust/dirt drop in the pump housing on the car. As soon as I started removing the pump, about a 1/16" out I could see dirt wanting to drop in. I stopped, pushed it back in and applied a little oil to stick the dirt down and stop it from falling in. Then I removed the pump and cleaned up the dirt.
Christopher Bieber
The install was not horribly difficult. Getting the high pressure line disconnected from the bottom of the pump was the hardest part due to the small amount of room available. I would suggest buying a set of stubby wrenches. The tappet isn't as easy to set as the video shows. I had to use more force to get it seating. I did use a screw driver handle but had to give the opposite end a few love taps with a hammer(not too hard). Reinstalling the pump went well once I figured out it was easiest to run the pump bolts down about 3/4 of the way then reconnect the high pressure line. I wasn't able to connect the line once the pump was bolted in all the way. I will only rate the internals 3 stars for now just because I haven't had a chance to beat on my car yet, but the internals themselves look like they were made with good materials and are nicely machined. I will come back and rerate once I have driven a few miles. On a second note, having made several purchases already, everything I have purchased from Corksport seems to be very good quality.
Jose Dejesus
This definitely took a little longer to install them I thought but the results are incredible. The car runs much smoother, power kicks in quicker and is well distributed across the RPM's. Noticeable increase in power and now I have the piece of mind of finally having this and knowing that my car is ready for the big bad downpipe. Stop wondering if you should buy this and just do it! It's worth it and you need CORKSPORTS version which is the absolute best! Thank you Corksport!
Alex McCoy
These internals are just as good, if not better than the popular Autotech and come with easy to read and follow instructions. Great pressure at WOT and I'm completely confident in this part. They sold out when I ordered mine and I was worried I wouldn't get them in time for dyno day at the local Mazda shop. I emailed Brett and told him this, and he reassured me they would make it in time. A few days later I get an email with the shipping tracker, and they had upgraded my shipping to priority at no extra charge. Amazing customer service, I will continue to spend all my money at Corksport! Thank you guys!
Carlos Freitas
a bit expensive especially for how small the parts are, but feels so much more smoother and responsive saw a max fuel pressure of 2059psi on my access port, max i hit before was 1857psi , took me a hour and 15 to do it and clean out the crap from the pump put a clean oil film on everything and went together smooth
Stephen Chupack
If you plan on modding your engine in any way, even if it's only a Stage 1 CAI, I recommend purchasing CorkSport's fuel pump internals. They are the gold standard and cheap insurance. I've got 10k miles on mine with no issues and I have the confidence of knowing I can supply 1800+psi at WOT all day long. The install was easy with two caveats: 1) A giant bench vise and breaker bar are very helpful. 2) On my car (2006 MS6), during removal, I could not get the fuel pump to clear the bottom fuel line no matter how hard I tried. I ended up finding a clamp securing the line to the engine block that needed to be loosened allowing me to lower the line a little so the fitting on the bottom of the fuel pump would clear. We're talking less than a millimeter here, but it would not come out for me without this step. Finally, FWIW, I noticed zero noise difference between the OEM and CS internals. As always, great job CorkSport!
Ethan Grimes
Worth the price buy over all other brands. I had an autotech already installed not my choice obviously. I can speak first hand that corksport is better I logged a 4th gear pull WOT with the autotech results were 1,856 psi in the fuel rail. I ran the same test with corksport and the results were a peak of 2,001 psi in the fuel rail. Corksport internals hands down have a higher flow and send more fuel to the engine. This means more power and safer to run higher boost levels.
New features
- Manufacturer
- CorkSport