Mazdaspeed Camshafts for DISI MZR Motor
Description
The CorkSport Mazdaspeed Performance Camshafts are developed with the latest design, manufacturing, and casting technologies and ground to CNC precision for the best performance for your Mazdaspeed. Near factory idling cams for the daily driver and even the aggressive track driver bringing improvement in throttle response and torque to your Mazdaspeed. #ZoomZoom!
Check out the installation instructions below. Share your performance review with the CorkSport community once installed!
The CorkSport Advantage
Performance Driven
The CorkSport Mazdaspeed camshafts were tested on a fully bolted and CorkSport Turbo equipped 2013 MS3. The performance camshafts provided a respectable TQ/wHP gain across the entire RPM with a peak gain of 22.5whp. This is power you will feel across the whole RPM band, not just a top end improvement in power.
Daily Driver Friendly
Retaining factory idle quality while maximizing horsepower and torque, no worries of a rough loping idle, felt from other camshafts. This gives you an advantage in power without giving away the upgrade on those trips to Mexico.
Direct Fitment
Designed to replace the OEM Mazdaspeed camshafts for the 2007 - 2013 Mazdaspeed 3 and the 2006 - 2007 Mazdaspeed 6 models.
No Regrinds!
CorkSport Mazdaspeed camshafts are manufactured from new castings, hardened and machined to exact tolerances. No cores, exchanges, or long waits for regrinds required.
Installation & Tappet Guide
Clear and concise installation instructions included along with an interactive tappet guide excel sheet available for download.
Camshaft installation is a highly demanding process requiring experience and high attention to detail. CorkSport highly recommends professional installation.
Additional Features
- Compatible with: 2007-2013 Mazdaspeed 3 & 2006-2007 Mazdaspeed 6
- Camshaft Specifications: Intake .390" Total Lift 215.8 @ .050 Duration, Exhaust .354" Total Lift 204.2 @ .050 Duration.
- Designed in America: Designed in Vancouver, Washington, in the Pacific Northwest.
- CorkSport Service & Support: Knowledgeable telephone technical question and installation support at (360) 260-2675 and full color installation instructions.
Warranty:
2 year warranty against manufacturing defects. 1 year warranty applies to lobe wear on the camshaft. The warranty will not cover broken cams, lifters, tappets or any other engine parts. Camshafts are considered racing parts and as such this warranty will not cover abnormal wear due to insufficient lubrication, excessive engine heat, valve spring coil bind and cylinder head or guide interference.*Required Items for Installation*
- Two (2) Camshaft Friction Washers (L3K9-12-429)
- Two (2) Camshaft Bolts (LF17-12-428)
- One (1) Fuel Pump Housing Gasket (L3K9-10-193)
- Tappets for valve adjustment
- MZR Camshaft Alignment Tool/Plate
- MZR Crankshaft TDC Locater Pin
How To Install Your CorkSport Mazdaspeed Performance Camshafts
It will take you 5-8 hours to install the CorkSport Mazdaspeed Performance Camshafts with our easy-to-use instructions.
5-8 Hour Install Time
5/5 Difficulty
2-Year Warranty
No CEL
Reviews
James Dean
A great addition to any street driven mazdaspeed 3 or 6. While they don't add a lope to the sound, they do seem to give a more aggressive exhaust and they really help wake up the engine in both daily driving and spirited driving situations. The turbo spools faster and holds longer! My tuner (Erik @ DramaTune) said the added camshafts added airflow through the entire rpm range.
Salim
This is a essential mod that is normally missed. If you have a bigger airpipe and a bigger flowing exhaust, this is a must. Flow/port the head and this is cannot be missed. Add the corksport intake manifold/throttle body with a good exhaust manifold and its complete. Car sounds mean and it does not mess the idle up.
Santino Tarozzi
They work
New features
- Manufacturer
- CorkSport