Description
Since 2015, the Mazdaspeed 3 Drop-In Turbo has been one of the best performance upgrades for the platform.
Proven by thousands of community members, the CST4 is a perfect fit for the mildly modified Speed 3 and Speed 6 using stock fueling up to budget built engines with FBO and auxiliary fueling. Replace your KO4 with the easiest and most complete performance turbo for the Mazdaspeed and have room to grow to 450whp capabilities with the CST4.The CST4 features a MHI Journal Bearing CHRA, OEM Fit Compressor Cover, and choice between 0.66 A/R Internal Wastegate or 0.82 External Wastegate Turbine Housings.
The CST4 external wastegate turbine housing is designed for 44mm EWGs (Tial is a great option) w/included EWG elbow pipe & V-band clamp.
Includes a FREE CorkSport 3.5 bar MAP sensor for accurate boost pressure up to 37psi.
Drop In Performance:
Don’t let the size fool you; the CST4 packs a punch for such a compact and OE fitment package. From full bolt ons to fully built with auxiliary fueling, the CST4 will support power from 250-450whp while maintaining quick spool and great transient response between shifts
Stock Flange Fitment:
The CorkSport CST4 was designed with simplicity and bang for the buck power in mind. Maintaining the OEM compressor inlet size means you can use any intake on the market designed for the stock K04. Same goes for the turbine side with OEM flanges for compatibility with your OE fit downpipe and exhaust manifold.
Billet Compressor:
Utilizing a custom MHI 18G billet compressor wheel, the CST4 can efficiently support 50 lbs/min flowrate and boost pressures to 30psi. Compared to cast counterparts, modern forge milled wheels provide higher boost thresholds, improved response, and increased efficiency to get more power form a small package.
High Flow Turbine:
Paired with the compressor wheel is an MHI TD05H high flow turbine wheel. This wheel uses a 9-blade design which reduces overall rotating mass and thus improves response and spool.
High Performance CHRA:
MHI Journal bearing CHRA housings are used for both the CST4 and CST5 turbochargers for their increased cooling capacity and proven reliability.
High performance journal bearings and a 360 degree high performance thrust bearing is used.
Comparing the compressor and turbine wheels, we have a wheel size ratio of 1:21.
Billet Wastegate Actuator:
One-off billet actuator is used for the CST4 so you can operate the turbocharger in bleed mode for the OE EBS or in interrupt mode with the CorkSport EBCS for increased boost control
All Hardware Included:
The CST4 comes will all the necessary hardware for installation saves you time and money on gaskets, studs, and the specialty parts.
Choose your Boost Control:
Do you want an easy to use Internal Wastegate setup or an External Wastegate setup and screamer pipe? You decide with the CST4!
Internal Wastegate setup includes the 0.66 A/R IWG turbine housing and IWG Actuator.
External Wastegate setup includes the 0.82 A/R EWG turbine housing and V-Band Clamp & Elbow designed for 44mm EWGs. (EWG and Screamer Pipe Not Included).
Don’t worry, if you want to change your setup from IWG to EWG later you can.
- Vehicle Fitment: 2006-2013 DISI MZR found in the Mazdaspeed 3/6 & CX-7.
- Designed in America: in Vancouver, Washington, in the Pacific Northwest.
- CorkSport Service & Support: 1 year limited warranty, full color installation instructions, all necessary components, and knowledgeable telephone support at (360) 260-2675.
- An upgraded HPFP and COBB AP/Tune is required with this product.
- Auxiliary fueling required for peak power operation of this turbocharger.
- Some aftermarket downpipes will NOT clear the EWG elbow that is included with the CorkSport EWG Turbocharger.
- EWG variant designed for Tial 44mm or equivalent external wastegates (not included but available).
- External wastegate is NOT included with turbo. Did we mention it is not included, because it is not.
- EWG dumptube/screamer pipe is NOT included with turbo but can be added as an option.
How To Install Your Mazdaspeed 3 and Mazdaspeed 6 Upgraded Turbocharger
It will take you 5 hours to install the CorkSport Mazdaspeed CST4 with our easy-to-use instructions.
5 Hour Install Time
4/5 Difficulty
1-Year Warranty
No CEL
Reviews
jeff
perfect alternative to the stock paper weight . dont let the size of this turbo fool you it builds to about 15 pounds really smooth then gets violent to 27 pounds fitment was perfect
Jeremy Millen
I needed to change a smoking stock turbo and decided on this bad boy. I honestly chose it because it was a direct replacement and the price was perfect. As others have stated, it spools for days and pulls like a pack of rabid dogs gunning for the finish line at the Iditarod.
Kevin Thomas
Had this installed and dyno'd. Gotta say it is a top notch turbo and turned my car into a beast. It spools a bit later than the ko4 but the spool doesn't stop. Plus it whistles like a diesels turbo when spooling. Well worth the money especially since it really does drop right in with out issues. Time for a rear motor mount to get rid of the added torque steer.
Carl Cordova
Great turbo! The install was not difficult and I was not very mechanically inclined, I think changing breaks is more difficult. The turbo has a nice loud deep turbo noise and I cant get enough of it haha. It also makes the car move! I am currently running it at 21 psi and couldn't be happier the car is so quick I am very glad I went with corksport for the turbo. They are a great company and I had an issue with my points not going through but they fixed it right away. I would highly recommend this turbo to anyone looking to buy.
Vic
Hey Guys, My turbo died. My engine died also a few months ago and I rebuilt it on fully forged internals but in rest my only mods are COBB SRI and Hypertech and BPV. How will this work if I replace my busted turbo with this one? I need a direct replacement and didn't plan to buy the AP right now. Thanks, Victor
Alex W.
Looking at the spec list you can tell Corksport did their homework for building the most optimized turbo for this platform. Once you unbox the prize you can see first hand the level of quality in the castings not found in even the big name turbos. The forged billet compressor wheel is a work of art, as is the billet wastegate actuator housing. It's almost too much of a masterpiece to hide deep inside an engine bay. Installation is about as easy as it can get for a big turbo install, having an included coolant line, new studs and nuts for both the manifold and downpipe, quality gaskets for both sides and provisions for all heat shields but one, which is recreated to work with the new setup. It even retains the factory oil lines and ebcs mount. But the real truth to its performance happens once it's bolted up and tuned. The only familiarity to any of my previous oil infested, self grenading k04s is that instant spool thanks to the high performance 9-blade turbine wheel. From that point forward it's everything you'd want it to be. The dyno graphs are about as perfect as you could ask for. Peak horsepower just before redline and a flat torque curve that brings a grin to your face driving the car at any throttle level. On just 92 octane I'm putting 350whp on my Genwon and the turbo isn't even breaking a sweat yet. I have far more room to grow with a built block and additional fueling if I ever go down that road. No more k04 flamethrower, no more power drop at 5500rpm. All smiles, all the time. This is the perfect turbo for this platform.
Will H.
This things spools up quick! Running 17 psi going to about 20psi and it pulls strong. And it’s a lot smoother than the stock k04.
Sam Segrest
Overall I am very impressed with this turbo, not only does it look great but it performs amazingly! The install was very simple using the provided instructions from Corksport, after the install and the re-tune the performance of my car is night and day compared with the old Ko4. This turbo definitely out performs the BNR in many ways, first and foremost it flows more than the BNR, secondly the turbo comes with gaskets, studs, nuts, coolant line and a nice heat shield which the BNR does not come with for the same price. For me, choosing this turbo over the BNR was an easy choice and I am very pleased with it.
- Wastegate Type
- Internal Wastegate