2007-2013 Mazdaspeed 3 Rear Adjustable Sway Bar

$249.99
Availability: In stock




Description

Remove the tendency to overpower the front tires under hard cornering and minimize traction robbing body lean with the CorkSport Mazdaspeed 3 Rear Adjustable Sway Bar. Compressing inside suspension, the CorkSport Mazdaspeed 3 Rear Sway Bar effectively increases the spring rate on side of the suspension which is compressed most and its adjustability allows you to fine tune the handling. Each Mazdaspeed3 sway bar includes machined 6061-T6 aluminum sway bar brackets which are more durable than the stamped steel design common with other sway bars and look sharp with an anodized black finish.

The CorkSport Advantage



Adjustable: Two end link attachment points to change the stiffness between 45% stiffer (1305 lbs/inch) than stock, or 80% stiffer (1603 lbs/inch).







Single Piece: A single piece is used to create the rear sway bar which adds strength by removing weak points such as welds.








Billet Sway bar Brackets: Superior bracket design with grease fittings for easy servicing with 90a durometer polyurethane, our brackets and bushings are the last you will need. Once installed, the reduced bar movement gives you extra confidence when taking corners.





The CorkSport Advantage:

  • Extra Value: Includes Billet Sway bar brackets, at $79.99 value.
  • One piece design: CNC bent for precise fit and made from 28.5mm 4130 Steel.
  • Adjustable: Two adjustable locations for the end links to install allowing you to change how much the bar uses the other side of the suspension. 45%/80% stiffer than stock on the Mazdaspeed 3.
  • Fitment: 2007-2013 Mazdaspeed 3.
  • Made in the USA: Engineered and manufactured by CorkSport in Vancouver, Washington.
  • Durable blue or black powder coated finish: can survive the winter driving in areas where roads are salted for snow and ice.
  • CorkSport Service and Support: Receive a two year limited warranty, full color installation instructions, all of the needed installation hardware, and knowledgeable telephone support.



  • Install time                  2/5 Difficulty               2 year warranty       No CEL






Reviews

Lindley

Love this RSB. Really cuts down on understeer and improves cornering significantly. Makes road rallys a lot more enjoyable!

Paul

I have had this installed on my 2015 Mazda 3 HB for about 5 months so I have the older mounts. It has always made a clicking sound when going up a driveway, pothole or when making a right turn. I have tried tightening the nut on the sway bar link and have even put loctite on it and it still makes the noise. Im pretty sure its the sway bar link hitting my springs. CorkSport Reply:Paul Give us a call at 360-260-2675, the rear swaybar should be no where near the rear springs.

Joe Furtney

over 14 months after I put it on....just get it...front and back. Strongly consider the 4 point brace for the front end too. two words.... Go Kart. nuff said. Thanks for the great enhancement Corksport

Donald Kairewich

Great RSB, this bar has got girth.. Can't wait to tear up the track with this beast.... Thank you Corksport...

Michael Wallace

Got the front and rear installed 2 days ago, instructions they give you make it easy, customer service is outstanding, and my car handles awesome. Highly recommend

Jeffrey

JUst wanna say, Awesome Job!, on this sway bar. I bought it slightly used from a fellow Mazdaspeeder! And it kicks A$$. What a difference over stock. I thought it handled well on its own, now with over 40,000 miles, i can feel the chassis getting very loose compared to the day i bought it new. This bar really keeps it planted to the ground. I've got some really sharp corners by my house and i used feel the nose of the car get really overwhelmed when taking these corners, but now its incredible how much better you can corner. Well done, and I love the blue color, looks sharp, just need to get the new brackets you just released. Thanks again!

Lewis

The Energy Suspension brackets supplied with this kit have failed three times. Could have made your own.

Chris Douglas

Install went very well, only question i have is, i am using the factory endlinks, and now i am getting a knocking sounds over bumps in the road. Can the factory links support this bar? or should have i upgraded them?

Micheal Rockwell-Pate

Great product. Tracked the car two days after installing the front and rear sway bars and it was flawless. Great job CorkSport!

Micheal Rockwell-Pate

Great product. Tracked the car two days after installing the front and rear sway bars and it was flawless. Great job CorkSport!

Swaybar Color
Blue