Description
Protect your Mazda with the CorkSport water-repellant air filter sock. The filter sock adds an additional layer of protection to your engine and air intake filter itself. The polyamide fabric mesh maintains good airflow, keeps large dust and debris from entering the air filter media as well as provides a water repellant effect with light water spray.
Read The BlogProtect Your Mazda with the CorkSport Air Filter Sock
The CorkSport Advantage
Design
Designed for CorkSport and standard-size cone air filters, the polyamide fabric mesh provides a barrier to keep your air filter performing at its best. Keep the large debris, heavy dust, and water spray from entering the filter media.
Fitment:
The Air Filter Cover is specifically designed for the air filters used on CorkSport Intake Systems (both the older and newer dual cone style air filters). Check your air filter before ordering so you order the correct size!
CorkSport air filters are labeled with a size on the rubber section of the filter: 3.0”, 3.5”, 4.0” & 4.5”.
Check Your Filter:
CorkSport filter or not, you can benefit from an air filter sock! Check your non-CS filter size to see if this works for you!
- Please verify the size of your air filter before ordering, as this item is not available for exchange.
- The air filter size is shown on the MAF side flange of the air filter itself.
- The small air filter sock works on 3.0, 3.5, & 4.0 marked air filters only
- The large air filter sock works on the 4.5 marked air filter only
- The CorkSport Air Filter Sock is water repellant, not 100% waterproof. Heavy water impact can overwhelm the filter sock and pass through.
- Mazda 2 air intake filters are not supported by these filter socks, they will be overly loose if installed.
- DOES NOT INCLUDE FILTER.
Additional Features
- Vehicle Fitment: CorkSport Intake Air Filters Sizes 3.0”, 3.5”, 4.0” & 4.5”
- Designed in Vancouver WA, USA.
- CorkSport Service and Support: Receive a 6-month warranty, full-color installation instructions, all of the needed installation hardware, and knowledgeable telephone installation support.
How To Install the CorkSport Mazda Air Filter Cover
It will take you Approx. 30-minutes to install.
30-minute Install Time
1/5 Difficulty
6-month Warranty
CEL
Reviews
Jeff @ Print.Fab.Drive.
Wrap. Your. Filter. Protect Your Investment! I picked this up with the short ram intake (Axe-6-117-22120) for my 2004 Mazda3 2.3L. Once you remove the factory air box to install the short ram kit, you’ll have a large filter exposed to the elements entering your engine bay. This simple product can prevent a lot of headaches and expenses! You simply slip it over the tip of your intake down to the base, covering the filter element and securing it with the built-in elastic band. It’s designed as a pre-filter to prevent water from soaking into your filter media. Water beads right off. It’s especially helpful if you live in an area prone to standing water or frequent storms, like mine. One time, I had to open the hood to check my power steering while it was pouring rain, and the wrap kept the filter from getting completely saturated. It's also interesting how the wrap affects the appearance of the filter pleats. It’s not something you think about, but now that I’ve seen it in person, some filters just look weird without that protection.
Tyler Lawson
Perfect fit for my filter. Does a great job at keeping it clean as well. There is visibly less dust after installing this. Does not fit as great as a sock for my feet, but the instructions cover this.
Paul
Fit snug and matches ALL my other CS parts! Poured water on it to see if it worked and it slid right off no problem.
Joshua Sturtevant
I have an aftermarket hood that is vented and the timing of this release was perfect to make sure my intake filter stays safe from the added environmental ingress. Pre filtering dust and debris will also help keep the filter nicer for longer and help water from causing issues.
Brandon Winkle
After purchasing the CorkSport air filter cover, I was impressed by its quality and functionality. The cover is well-designed and fits perfectly, providing an added layer of protection for my air filter. The water-repellent feature is particularly useful, especially during rainy weather or when driving through wet conditions. Overall, I'm very satisfied with this product, and I would recommend it to anyone looking to protect their engine and air filter.
Brayden Stevens
Make sure to follow the instructions or else weird things might happen ._. Great product, keeps the dirt and such out of the filter :)
Raider
Easy fitment and no more worries about Floridian sand caked in the filter.
Raider
Installation was a breeze. Filters out the sand I hope. The hellscape of Florida does this.
- Air Filter Sock Size
- Small for 3.0, 3.5, & 4.0