[Hide]Online Shopping[Hide]
Dec 4, 2008
Check Out 0 items
Order StatusOrder Status
 
Browse
(See All Items)
 
Department
mx3-engine

 

92-95 Mx3 Bored 1.8 V6 Throttle Body


92-95 Mx3 Bored 1.8 V6 Throttle Body

View Larger Image

3mm larger bore with a new throttle plate installed.  No core, outright purchase.
 
Our Price:$195.00
Compare To:$265.00
You save:$70.00 (26%)

Calculate Shipping Cost

Carrillo Rods Pro-A beam, set of 4


Carrillo Pro-A beam rods are designed for a less stressful enviroment than the Pro-H beam rods.  If you are looking for an upgrade on an engine rebuild and want a more reliable part that will withstand abuse this is the rod for you.  The rods include bolts and come in a set of 4.  Fits B6 and BP motors.
  Price: $860.00

Calculate Shipping Cost

Carrillo Rods Pro-H beam, set of 4


Carrillo Rods Pro-H beam, set of 4

View Larger Image

Carrillo Pro-H beam rods are the best and stongest connecting rod on the market for your Mazda.  The Pro-H rod is designed for the most demanding conditions, whether it be high boost or high rpm or both.  The rods are sold in a set of 4 and include bolts.  The rods fit both B6 and BP motors.
  Price: $1230.00

Calculate Shipping Cost

CorkSport Oil Fill Cap


CorkSport Oil Fill Cap

View Larger Image

CorkSport now offers an oil cap from your favorite Mazda Performance company.  The oil cap is made from billet aluminum and comes in silver, black, blue and red.  The oil caps fit all models except the Mazda 3, Mazda 5, Mazda 6, and Cx7.
Color 
  Price: $29.00

Calculate Shipping Cost

HKS Circle Earth System -Universal


HKS Circle Earth System -Universal

View Larger Image

Circular Grounding System - By utilizing a 24 karat gold plated distribution block and multiple grounding points, improved idle and drivability are often obtained as the additional grounding points equalize resistance and voltage between various ground points. Each 8 guage spiral twined cable is wrapped with signature HKS purple plastic to protect and add color to the Circle Earth System. This is a universal kit and you will have to find your own ground points.


  Price: $135.00

Calculate Shipping Cost

J-Spec 'GT-R' Connecting rods, set of 4


The J-Spec GT-R rods are from the Japanese market 323 GT-R built from 93-94 for WRC.  The connecting rods are much stronger than the stock rod used in Mazda B series engines.  The rods fit B6/BP engines.  We have run over 30 psi on our Protege Drag car with these rods.  The rods come with bolts and nuts and come in a set of 4.  The rods will fit the B6 or BP engine.

 

 

 


  Price: $540.00

Calculate Shipping Cost

J-Spec 90-94 BP Turbo wiring loom, new


The new wiring loom for the 90-94 BG Familia BP Turbo GTX is available.  It requires modifications to fit other vehicles.



Usually ships in 8 weeks
  Price: $784.00

Calculate Shipping Cost

MAGNECOR Performance 8.5 mm Ignition Wires (4cyl)


MAGNECOR Performance 8.5 mm Ignition Wires (4cyl)

View Larger Image

Ignition Cables feature Magnecor's exclusive 2.5mm high capacity Metallic Inductance EMI Suppressed conductor consisting of stainless steel wire precisely wound at 200 turns per inch over a ferrimagnetic core. The insulating jacket is made entirely of Magnecor's exclusive TC-1500-HS high strength aerospace grade silicone rubber, and its single layer construction will prolong the jacket's insulating ability by conducting extreme heat away from hot-spots that occur near over-the-limit heat sources.
SOHC/DOHC 
  Price: $62.00

Calculate Shipping Cost

MAGNECOR Performance 8.5mm Ignition Wires (V6)


MAGNECOR Performance 8.5mm Ignition Wires (V6)

View Larger Image

Ignition Cables feature Magnecor's exclusive 2.5mm high capacity Metallic Inductance EMI Suppressed conductor consisting of stainless steel wire precisely wound at 200 turns per inch over a ferrimagnetic core. The insulating jacket is made entirely of Magnecor's exclusive TC-1500-HS high strength aerospace grade silicone rubber, and its single layer construction will prolong the jacket's insulating ability by conducting extreme heat away from hot-spots that occur near over-the-limit heat sources.
  Price: $185.00

Calculate Shipping Cost

Mx3 SRD Billet aluminum battery tie down


Mx3 SRD Billet aluminum battery tie down

View Larger Image

This attractive Battery Tie Down is CNC machined from 6061 aluminium and comes mirror polished.
  Price: $46.00

Calculate Shipping Cost

NGK 'KL-ZE' Spark Plugs (ZE, V6)


NGK 'KL-ZE' Spark Plugs (ZE, V6)

View Larger Image

The heat range of spark plugs combined with the gap of .035 have been shown to be the most effective for tuning KL_ZE powered vehicles. (Set of 6 plugs)


  Price: $12.00

Calculate Shipping Cost

NGK 7mm Ignition Wires (4cyl) DOHC


NGK 7mm Ignition Wires (4cyl) DOHC

View Larger Image

A ferrite magnetic layer consisting of a mixture of rubber, plastic and powdered ferrite magnetic materials, offers uniform resistance and unsurpassed conductivity. NGK wires have a lower resistance than conventional carbon core wires (8k ohm/meter vs. 16k ohm/meter). This comparison is important to remember when you consider that many manufacturers recommend wires be replaced when the resistance exceeds 20k ohm/meter. This does not leave much margin for wear when the wire may only meet original standards at the very early stages of its life.

At the center of NGK Resistor Spark Plug Wire Sets is a fiberglass stranded core, made from the same family of materials used in bullet proof vests. This core greatly enhances the overall strength of the wire, providing a super strength backbone on which the various layers of the wire assembly are formed. The core gives protection from damage caused by the pulling strains that wires are often subjected to and that can destroy their performance.


  Price: $51.00

Calculate Shipping Cost

NGK 7mm Ignition Wires (V6)


NGK 7mm Ignition Wires (V6)

View Larger Image

A ferrite magnetic layer consisting of a mixture of rubber, plastic and powdered ferrite magnetic materials, offers uniform resistance and unsurpassed conductivity. NGK wires have a lower resistance than conventional carbon core wires (8k ohm/meter vs. 16k ohm/meter). This comparison is important to remember when you consider that many manufacturers recommend wires be replaced when the resistance exceeds 20k ohm/meter. This does not leave much margin for wear when the wire may only meet original standards at the very early stages of its life.

At the center of NGK Resistor Spark Plug Wire Sets is a fiberglass stranded core, made from the same family of materials used in bullet proof vests. This core greatly enhances the overall strength of the wire, providing a super strength backbone on which the various layers of the wire assembly are formed. The core gives protection from damage caused by the pulling strains that wires are often subjected to and that can destroy their performance.


  Price: $94.00

Calculate Shipping Cost

NGK PowerDex AFX Air Fuel Monitor


NGK PowerDex AFX Air Fuel Monitor

View Larger Image

NGK Spark Plugs is introducing its new Powerdex AFX Wideband Air-Fuel Ratio Monitor for the performance aftermarket. This product meets the increasing demand in the market for precision air-fuel ratio monitoring tools.

Traditionally these types of tools commanded price tags that could only be justified by professional race teams and engine specialists. As technology advanced, many low-cost air-fuel ratio products emerged. Some used actual wideband sensors while others simply read OE style narrowband oxygen sensor signals and attempted to convert them to linear readouts….often with marginal success.

With the AFX, NGK now offers the most affordable wideband system to date. A flexible and rugged system complete with everything needed to get you tuning. The kit comes with a digital display control module, 13’ wiring harness, wideband air-fuel ratio sensor, exhaust boss and plug, and a comprehensive tuning manual. The tuning manual includes installation instructions and contains a detailed guide to performance air-fuel ratio tuning.

The AFX measures and displays air-fuel ratio (AFR) from 9.00 to 16.00. It demonstrates superb response and accuracy within 0.1 AFR. The air-fuel ratio information can then be utilized by the user to make fuel delivery adjustments to the vehicle’s carburetor, mechanical fuel injection, or programmable electronic fuel injection system. The desired air-fuel ratio can be achieved depending on the performance requirements of the engine or race application. This is an exceptionally useful tool for carbureted engines, where there is a lot of freedom in tuning as well as a great need for proper adjustment.

The AFX also has analog output for use with datalogging tools.


  Price: $309.00

Calculate Shipping Cost

NGK Racing Powercables (1.6 DOHC)


NGK Hyper Silicone Power Cable ignition wires, previously available only in Japan, are now being released in the U.S. These high performance spark plug wires have been sought after due to their extreme low resistance. While some carbon core wires can have resistance values upward of 5000 ohms per foot of wire, NGK Power Cable ignition wires are rated at an ultra low 270 ohms per foot. Lower resistance means these wires supply more sparking energy to the spark plug. This extra power is supplied while still minimizing radio-frequency interference (RFI) and the patented Hyper-Silicone wire jacketing prevents voltage leak.
  Price: $108.00

Calculate Shipping Cost

US-SPEC 1.6 DOHC turbo manifold ( uses IHI turbo )


The US Spec exhaust manifold is from the 88-89 Mazda 323 GTX.  The required turbocharger id the IHI VJ-14 or VJ-11 from the 88-92 Mazda Mx6/626 Turbo.
  Price: $305.00

Calculate Shipping Cost