Mazda and Mazdaspeed Sway Bar Brackets

The CorkSport sway bar bracket and bushings are lifetime tough and look great. You no longer have to deal with fatiguing and breaking from gold zinc-plated, steel brackets, commonly found in upgraded sway bar kits.

Our replacement brackets for Mazda3 and Mazdaspeed3 hold your upgraded sway bar securely, so you can get everything out of your car without worry. Improve your handling today.

Mazda Billet CNC Aluminum Sway bar Brackets Video

The CorkSport Advantage

CorkSport's Mazda and Mazdaspeed billet sway bar brackets.

Brackets: Machined from 6061-T6 aluminum, these brackets are durable and look sharp with an anodized black finish.

Bushings are included with CorkSport's Mazda sway bar brackets.

Bushings are included with CorkSport's Mazda sway bar brackets.

Bushings: Engineered for a perfect fit and made from 90a durometer polyurethane, our bushings are the last you will need. Once installed, the reduced bar movement gives you extra confidence when taking corners.

The CorkSport sway bar brackets fit all Mazdas and Mazdaspeeds.

The CorkSport sway bar brackets fit all Mazdas and Mazdaspeeds.

Compatibility: CorkSport’s sway bar brackets and bushings are designed to fit most makes and models of Mazda: 2004-2013 Mazda3, 2014+ Mazda3, 2007-2009 Mazdaspeed3, 2013-2016 CX-5, 2014+ Mazda6. Will not fit the 2010-2013 Mazdaspeed 3 front sway bar.

Additional Features

Made in the USA: Engineered and manufactured by CorkSport in Vancouver, Washington.
Specific Fit: Design for the Mazdaspeed and Mazda 3.
Extensively tested: Take a look at our blog post on the design and testing of the brackets.
CorkSport service and support: Includes a 2-year limited warranty, full color installation instructions, and all necessary parts. We provide knowledgeable telephone support at 360-260-2675.

How To Install Sway Bar Brackets

It will take you 30-60 minutes to install your brackets and bushings with our instructions.

Beautiful product, would expect nothing less. Love the grease fittings which should hopefully eliminate any future squeak potential.

However, I wish C/S would include some fresh hardware. Installing these awesome looking brackets, and then realizing no bolts were included, and having to re-use my rusted to hell stock bolts was slightly disappointing.

David T07/04/2020, 09:46 AM

stock brackets broke. these appear to be strong enough.

James Ferguson05/06/2020, 01:46 PM

I have purchased 3 sets of these for spares. They fit many other cars, I am using them for a 28mm hollow sway bar on a 2015 Camaro 1LE wide body track car. They look awesome and machined very well. I wouldn't buy from anyone else.

Alex Campbell11/25/2019, 09:02 AM

A dramatic improvement from what used to be shipped with the CS bars. I can verify they take years of abuse without complaint. If something fails in your setup, it won't be these.

Walter Piper03/24/2019, 01:16 AM

I assumed my brackets from C*bb were tough enough as they come reinforced at the normal breakage point unlike the cheap brackets from other brands. Unfortunately they broke just like all the others given enough abusive cornering.

I've given these aluminum units serious punishment on mountain back roads and on the track. No deflection, no movement, no clunking, and best of all, no breakage! I'm getting a second set to put on the front!

Alex Watson04/06/2015, 04:35 PM

I want to get these but I don't know the size of the corksport rear sway size for a 2013 Mazdaspeed3. What size mm is it?

Santino Tarozzi01/05/2015, 12:48 PM

Write a review

I was wondering if these would fit my 2010 Mazda 3 sedan? Specifically what sizes are needed for front and back.

Asked by Emile Gingras | 04/28/2023, 05:55 PM | 0 answer(s)

Hello! I'm curious about the use of these on my 2014 Mazda6 S... I'm not sure what size bar I have, honestly, but am trying to research this on realmazdaparts.com. Also, is there a CS sway bar available for my 6, or only the brackets? By the way, I'm enjoying ALL parts I've installed thus far. For close to 4 years, I've had the Short Ram intake, rear motor mount, and strut bar installed and couldn't be more happy every time I drive. I've got the cat back exhaust on order now, but unfortunately have to wait until you guys can get the materials to manufacture. I'll wait as patient as possible ;-). In the meantime, I'm thinking on getting these brackets, as well as the transmission mount and crankshaft pulley... I think I can get all that installed prior to getting the exhaust by June, lol.

Asked by Jason Lowery | 04/21/2021, 06:07 AM | 1 answer(s)

Hi do these brackets fit the OEM bushings?

Asked by Jon | 12/23/2020, 08:17 AM | 1 answer(s)

Will these fit the front sway bar on a 2017 Hatchback GT?

Asked by Anthony J. Gouveia | 08/08/2020, 07:07 PM | 1 answer(s)

Will this kit fit either front or rear on stock sway bar on 2012 speed3 and if it does will I need 2 orders to replace the front and rear?

Asked by Silas Galdamez | 08/02/2020, 09:14 AM | 1 answer(s)

Will these fit the Corksport aftermarket RSB? Thanks

Asked by Jeff Cutts | 09/05/2017, 01:25 PM | 1 answer(s)

I need to replace the bushings on my Corksport aftermarket RSB. Will these fit? Thx.

Asked by Jeff Cutts | 08/31/2017, 03:18 PM | 1 answer(s)

what part numbers or bushing size are needed for a 2012 Mazdaspeed3. Front: _____ Rear: _____

Asked by greg | 08/28/2017, 02:54 PM | 1 answer(s)

What size bushing will fit the stock front sway bar on a 2009 Mazdaspeed3? My limited research tells me the stock diameter is 26mm. Do I order your 25mm setup?

Asked by Adam | 11/11/2016, 05:03 AM | 1 answer(s)

Will these fit the front sway bar on 2010+ MS3?

Asked by Jay | 08/01/2016, 05:58 PM | 1 answer(s)

Could you suggest a type/brand/etc of grease that would be the best for these bushings? I've read no grease is best for poly bushings.

Asked by Aaron S | 08/10/2016, 12:16 PM | 1 answer(s)

Hey I have an 05 rx8 with a 28mm sway bar. I saw that this product will fit on most Mazdas with either a 25mm or 28mm sway bar. I would just like to know if it will fit on my rx8. Any advice would be great. Thanks, much appreciated.

Asked by Tim | 09/01/2016, 11:20 AM | 1 answer(s)

Just wondering which of these sizes would fit the oem front and rear sway bars on a 2008 Mazda 3?

Asked by Stephen | 05/07/2016, 09:17 PM | 2 answer(s)

Do the sizes of the brackets themselves differ, or is it just the bushings? Could I use the brackets with an OEM Front SB & bushings on a 2007 3S (Sedan)?

Asked by Yevs | 07/22/2016, 06:43 PM | 0 answer(s)

I have the first gen mazdaspeed3 sway bar with 3 wholes. Which size to I need 28mm or 25mm?

Asked by Rogelio | 01/09/2016, 10:54 AM | 1 answer(s)

Do either of the two sizes fit the OEM RSB?

Asked by Chris | 06/13/2015, 07:38 PM | 6 answer(s)

Are these priced per bracket or per pair of brackets?

Asked by Reid Nash | 05/14/2015, 01:52 PM | 1 answer(s)

Will this fit with a tri point rear swap bar ??? I think I'm using stock ones now or can I fit the bushings it has now wit this 90a bolt frame for it ???

Asked by Matthew | 03/08/2015, 08:10 PM | 1 answer(s)