Tuning – What Are Your Options

Pretty much since I joined this platform, I’ve noticed a pattern of people asking the same questions about tuning their Mazdaspeed. There is a lot of information out there, but it’s not always consolidated or easy to find. So, in an effort to assist newcomers, this will be a write up explaining the ins and outs of tuning; when you need it, OTS vs. Pro Tunes, and how you can proceed.

*There are other options for tuning the vehicle besides the Cobb
Accessport, such as Versa Tuner. But, for the ease of explanation throughout this blog, I will be referencing the AP*

What Is Tuning & Why Do You Need It?

Mazdaspeed 3 Engine with Front intake, SRI, batter box, heat shield

Without getting too elaborate for this specific blog, “Tuning” is just the remapping of the tables in the ECU from OE specs to something different. It is a key aspect of your car’s engine health and the easiest way to make more HP. You can even tune a bone stock car and will typically see gains, especially when they are boosted from the factory. Bolt-on parts free up even more headroom in airflow, and when tuned accordingly you make even more power. The relationship between bolt-on parts and a tune is a beautiful thing, and hopefully, by the end of this blog, you will understand how they work together.

“So when should I get a tune?”

I’m so very glad you asked that! Well, let’s look at it like this… Mazda spent a long time getting their factory tune for the Speed 3 as good as possible. But they dialed it in around one set up, and one set up ONLY. That’s 100% OEM parts. In this form, the ECU knows what to expect, how everything should respond, and most importantly when something is wrong. It doesn’t have a mind of its own though, it only knows what it’s been told. So, if other parts in the system are replaced, and the ECU isn’t told how to react to that, things start to get a little weird.

CorkSport High Pressure fuel pump internals, short ram intake with turbo inlet pipe, and front mount intercooler

The ECU has an ability to adjust itself within reason for variations in fuel, oxygen content, etc. But in a perfect world, it shouldn’t have to adjust itself at all. Tuning for the mods you do will not only let you have more fun, but it will get it as close to this perfect world as possible.

Minor things like an intake upgrade (Retaining stock MAF) BPV, or Catback usually won’t throw off the ECU enough to cause problems or CEL’s but it’s obviously not ideal. That being said, its best to get an Acessport or another means of tuning your Mazdaspeed prior to putting on bolt-on parts.

Mazdaspeed Exhaust system

So here is a basic FAQ

“I want to add a turbo back exhaust, but I don’t want to get an AP and tune the car. Can I do that?”
– No, you are not able to do this for two reasons.

  • Deleting the factory cats opens a huge restriction. Without a tune, the car will risk overboosting.
  • Without high-pressure fuel pump internals you also risk running lean and blowing the engine. Even if you have the internals with no tune, the drivability of the car can suffer because of how it affects the turbo.

“Can I get an intake with no tune?”

If its factory size, then you can usually get away with it. The turbo isn’t trying to make more boost, and the MAF housing should be accurate to the OE. If it’s a larger one like our 3” or 3.5” then no, you cannot.

However, I always recommend tuning the car.

“Can I get a catback with no tune?”

Yes, you will be OK, the catback is not monitored by any sensors, and you’re not deleting any cats.

“Can I change my intercooler without a tune or fuel pump internals

You should not. Just like the cats on the downpipe, the factory intercooler is a restriction. The ECU currently is tuned to fight this restriction to make a specific boost level at a specific RPM. If you remove this restriction, and you don’t tell the ECU, you risk over boosting. Over boosting mixed with no fuel pump internals can be a risky combo for running lean as well.  

“Can I upgrade my turbo without tuning the car?”

  • Definitely not, any turbo that moves more air than the factory one automatically needs a tune. The ECU is tuned to coincide with the factory compressor map. If you don’t want to tune for a turbo, make sure you get a factory replacement. These are just some of the common questions we get, but if you have more specific scenarios you can always email or call us! On to the next section.

OTS maps vs a Pro-Tune

I remember when I first got my hands on an Accessport. Trying to make sure I selected the right map and learning how to read all the parameters. I know a lot of newbies that are just getting an AP probably are asking themselves which OTS tune is the right one to use, and when should they get a Pro-Tune and how.

It’s no news to anyone that’s been in the community for a minute that the Cobb OTS maps are not the best Long-Term Solution. The reason for this is because they are:

(A) Very conservative, and not letting you get the full potential you can.
(B) Meant for a large population of cars, and aren’t really dialed in. Essentially, they are just rough around the edges.

However, OTS maps do serve a purpose. For someone who is planning on doing their basic bolt-ons in stages over the course of a few months then it works out well. These maps can be viewed as basic stepping stones “Stage 1, Stage 1+, Stage 2, Stage 3, Etc” that allow you to put on your first bolt-ons and flash the corresponding tune. So, as you are putting on your fuel pump internals, intake, downpipe, Intercooler, you can flash those readily available maps.


In a nutshell, the OTS Maps work great during the transitional phase of your modding Journey. But, once you know you are done with your bolt-ons for a bit, that’s when you want a map that is 100% dialed in, and specific for YOUR car. The difference between a custom tune and the Cobb OTS maps are truly astonishing, and you’ll see once you’re there.

Something to also note….

If your K04 ‘Sploded and you are looking at a larger turbo, an OTS is no longer an option, it’s off the table. Cobb made those OTS maps solely for a factory turbo’d Mazdaspeed. If you buy a bigger turbo like ours, a Pro-Tune is needed (along with fuel pump internals)

“Don’t I have to get the car on a dyno in order to get a Pro-Tune? There’s no Mazdaspeed tuners in my city!!!!”

If you’re not one of the lucky ones that live by a Mazdaspeed tuner, then fear not. The days of having to get it on the dyno to get a tune or over. With the Accessport, Maps are sent/downloaded over email.

To Start the process, you need to:

  1. Buy the tune
  2. Give them your full engine Mod List
  3. The tuner will instruct you on taking your Data Logs
  4. Over the course of a few weeks, you will go back and forth with new tune revisions and the car usually gets smoother and faster with each revision.

By the end of this process, you will have a dialed-in tune and a smooth-running car. But, please note that if you add another part to the car or change parts. You may need to get a revision tune done to account for the new mod. Talk to your tuner about this and get their thoughts.

Mazdaspeed K04 Turbo Upgrade

Recap

I hope that this helped some of you to better understand the processes you should take, and to wrap it up we will hit some of my main points.

  1. The first mods you should get for your Mazdaspeed if you plan to mod it is the upgraded fuel pump internals and an Accessport
  2. If you just want to run an SRI and a catback, you can get away with it, but a tune is Recommended.
  3. You should NOT run a downpipe without HPFPs or a tune.
  4. OTS maps are great during a transitional time with your car while bolting on parts. After this, you should get a Pro-Tune
  5. You shouldn’t run a larger turbo on the stock map or on an OTS map. Communicate with a tuner before the installation and have a new base map ready. We have both a 3.5 Bar MAP Sensor and 4.5 Map Sensor.
  6. Pro-tuners can tune you, even when they aren’t local.

To conclude this blog, it’s important to know how critical the proper tune on the car can be. It can make or break the engine, literally.

If any of you still have questions, you can always give us a call, and remember to have fun as you begin your journey down the path to making power, and giving WRX’s the L.


Happy Boosting,
Brett@CS

Connect with us

Preparing your Mazdaspeed for Tuning

Preparing Your Mazdaspeed For Tuning

CorkSport was just hit with snow again today…boy are we ready for winter to be OVER!

Are you ready? What do you have left to get ready before the weather breaks, and racing starts? 

Winter months exist so us Mazda people can spend all of our hard earned money to make our Mazdaspeed’s faster. It all starts with an AccessPort, and CorkSport Fuel Pump Internals.  Before you know it, your Mazdaspeed is now fully bolted with an upgraded CorkSport Turbo.  

People sometimes seem to forget that quality of your tune is just as important as the quality of your parts.  So how do you get a solid tune on your car?

CorkSport wanted to make sure to lay out exactly how to prepare your Mazdaspeed for tuning services.  This helps streamline getting your Mazdaspeed ready, and it also helps your potential tuner so they don’t have to worry about tuning with a potential mechanical problem.

Cobb AccessPort

The very first step in getting your Mazdaspeed tuned would be to get the Cobb AccessPort tuning device.  This is the gateway to access your ECU and to make adjustments to your tune. You will use your AccessPort to record logs and send those logs to your tuner.  Not only can you make adjustments to your ECU, but you can also read/clear CEL’s ( check engine lights), and you can also monitor up to six different parameters in real time.  

When you do apply for a tune, your tuner will tell you which parameters to monitor so they can have the correct information to get you a reliable tune.

CorkSport Fuel Pump Internals

The stock high-pressure fuel pump internals has proven to randomly lose pressure during a fourth gear wide open throttle pull.  What we have seen is the pump spike pressure up in the 1800’s, and by redline, the fuel pressure has dropped below 1600psi. This creates lean situations which have lead to engines grenading themselves.  Before a tuner will touch your car, you will have to make sure to have these upgraded. These will increase flow and allow your fuel pressure to stay above 1600psi keeping you in the safe zone.

Spark Plugs

Double check what your tuner will want you to use, but in general, people will use one step colder plugs gapped down to a .026.  The trusted spark plug in this platform would be the NGK Iridium IX plugs (part # 6510). The idea behind using a more quality plug with a smaller gap is to keep the spark from blowing out when you increase boost pressure.  If you do have too large of a gap, then you will start to misfire, and you should get a code on your AccessPort for either random misfire, or cylinder specific. Keeping that spark in check will prevent delays in the tuning process.

Compression Test

Making sure to double check the engine health is probably one of the most important things to do before modding and tuning your Mazdaspeed.  Doing a quick compression test to make sure your cylinder rings can still hold pressure will tell you if the engine is healthy or not. Ideally, you want to see all of your cylinders read approximately the same numbers.  

You also do not want to see your compression go below 140 across the board. Mazda says that anything 140 or below is poor compression. If you end up having an unhealthy engine, then the car will not make the desired power, and you could potentially ruin your engine even further.  Make sure to check out our misfire blog where we show you how to properly boost leak test your car!

Boost Leak Test

Every tuner is going to be targeting a certain boost pressure based upon current modifications.  A lot of times the turbo has to work harder because of a few boost leaks that are not closed off before tuning.  This can affect your fuel trims, and it will also affect how much wastegate duty cycle is needed in order to reach desired boost targets.  Having zero boost leaks is important so your tuner does not have to work around those leaks.

Ghost Knock

A big question we always see in the forums, and on Facebook would be people wondering why their AccessPort shows knock values.  The most important thing to remember is part throttle knock is nothing to worry about. My own Mazdaspeed see’s values of 8.0 all the time on part throttle.  The only time to worry about knock values is when you are at wide-open throttle. As long as your knock values stay below 2.0 then that is nothing to worry about.

Doing these few simple things for your tuner will not only save time for both of you, but your tuner will love you because they don’t have to try and diagnose an issue from thousands of miles away.  CorkSport hopes this really helps the community as a whole, and we also hope that people can use this as a tool to get their car dialed in much faster.

Stay happy, and stay fast CorkSport family!

-Luke